Download Data Sheet

DATASHEET
Rev. A
WMEM1036 SERIES
100~240VAC Input Voltage Range
15~36 Watts, Single Outputs
US 2-Pin and US 3-Pin Types
Medical AC/DC Wall Mount Power Supplies
FEATURES
 Single Outputs
 100~240VAC Input Voltage Range
 CEC/Energy Star Level V Compliant
 US 2-Pin and US 3-Pin Plug Types
 RoHS & WEEE Compliant
 Dimensions: 3.92” x 1.79” x 1.22”
 Short Circuit and Over Voltage Protection
 UL60601-1 Medical Approvals
 MTBF: > 30,000 Hours
 Optional Output Connectors Available
DESCRIPTION
The WMEM1036 series of medical AC/DC desktop power supplies provides up to 36 Watts of continuous output
power in a 3.92” x 1.79” x 1.22” package. This series consists of single output models with a wide input voltage
range of 100~240VAC. The WMEM1036 series is RoHS, WEEE, and CEC/Energy Star Level V compliant and
has UL60601-1 medical approvals. These models are also protected against over voltage and short circuit
conditions. US 2-Pin (suffix “U”) and US 3-Pin (suffix “5”) plug types are available. Please call factory for
ordering details.
05/25/2012
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 1 of 4
Rev. A
WMEM1036 Series
US 2-Pin & US 3-Pin Types
15~36 Watts, Single Outputs
Medical AC/DC Wall Mount Power Supplies
SPECIFICATIONS: WMEM1036 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
Input Voltage Range
Input Frequency
Input Current
Inrush Current
OUTPUT SPECIFICATIONS
Output Voltage (See Note 2)
Line Regulation
TEST CONDITIONS
Min
Typ
Max
Unit
100
240
VAC
50
60
Hz
1.0
A
60
A
See Table
defined by changing ±10% of input voltage
from nominal line and rated load.
Load Regulation
-1
+1
%
-5
+5
%
Output Current
See Table
Minimum Load
0
A
Output Power
Ripple & Noise
See Table
Measured at nominal line and full load with
20MHz limited bandwidth and 0.1µF ceramic
and 47µF aluminum capacitors in parallel
across the output.
240
Hold-up Time
mVp-p
8.3
ms
Turn-on Time
3
s
PROTECTION
Over Voltage Protection
Automatic recovery
Short Circuit Protection
Automatic recovery
GENERAL SPECIFICATIONS
Efficiency (typical)
82
%
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Storage Humidity
MTBF
0
50
°C
-20
85
°C
5
95
%
30,000
hours
PHYSICAL SPECIFICATIONS
AC Plug
3.92 x 1.79 x 1.22 inches
(99.5 x 45.5 x 31 mm)
US 2-Pin and US 3-Pin
Weight
7.76oz (220g)
Dimensions (L x W x H)
SAFETY & EMC
Safety Standards
Compliance
05/25/2012
UL60601-1
RoHS, WEEE, CEC/Energy Star Level V
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 2 of 4
WMEM1036 Series
US 2-Pin & US 3-Pin Types
15~36 Watts, Single Outputs
Medical AC/DC Wall Mount Power Supplies
Rev. A
MODEL SELECTION TABLE
Model Number (1)
Input Voltage Range
Output Voltage (2)
Output Current
Min
Max
Maximum Output Power
WMEM1036AU
9 ~ 15 VDC
0A
3A
36W
WMEM1036BU
9 ~ 15 VDC
0A
2.5A
30W
9 ~ 15 VDC
0A
2A
24W
WMEM1036DU
9 ~ 15 VDC
0A
1.5A
18W
WMEM1036EU
9 ~ 15 VDC
0A
1A
15W
WMEM1036A5
9 ~ 15 VDC
0A
3A
36W
WMEM1036B5
9 ~ 15 VDC
0A
2.5A
30W
9 ~ 15 VDC
0A
2A
24W
WMEM1036D5
9 ~ 15 VDC
0A
1.5A
18W
WMEM1036E5
9 ~ 15 VDC
0A
1A
15W
WMEM1036CU
WMEM1036C5
100 ~ 240 VAC
100 ~ 240 VAC
AC Plug Type
US 2-Pin
US 3-Pin
NOTES
1. The red suffix represents the type of AC plug: “U” for US 2-pin type and “5” for US 3-pin type.
2. The output voltage is specified as a range (Ex: 9~15VDC); the customer must specify what they want the voltage set at.
3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic and 47µF
aluminum capacitors in parallel on the output.
4. Optional output connectors are available. Please call factory for ordering details.
MECHANICAL DRAWING
US 2-Pin Plug Type (Suffix “U”)
Unit: inches (mm)
US 3-Pin Plug Type (Suffix “5”)
Unit: inches (mm)
3.92±0.04 (99.5±1)
05/25/2012
1.22±0.04 (31±1)
1.79±0.04 (45.5±1)
1.79±0.04 (45.5±1)
1.22±0.04 (31±1)
3.92±0.04 (99.5±1)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 3 of 4
Rev. A
WMEM1036 Series
US 2-Pin & US 3-Pin Types
15~36 Watts, Single Outputs
Medical AC/DC Wall Mount Power Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working
closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to
provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss
your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
05/25/2012
(603)778-2300
(888)587-9255
(603)778-9797
[email protected]
www.wallindustries.com
5 Watson Brook Rd.
Exeter, NH 03833
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
Page 4 of 4