Transient Voltage Suppression Diodes Axial Leaded – 6kA > AK6 series AK6 Series RoHS Pb e4 Description The AK6 series of high power TVS diode is specially designed for meeting severe surge test environment of both AC and DC line protection applications. It features a very fast response and ultra low clamping characteristics over traditional metal oxide ( MOV ) solutions. They can be connected in series and / or parallel to create a very high surge current protection solution. Agency Approvals AGENCY Features AGENCY FILE NUMBER E128662 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Operating Storage Temperature Range TSTG -55 to 150 °C Operating Junction Temperature Range TJ -55 to 125 ºC Current Rating1 IPP 6 kA • Very low clamping voltage • Ultra compact: less than one-tenth the size of traditional discrete solutions •Sharp breakdown voltage • Low slope resistance • Bi-directional • Foldbak technology for superior clamping factor • Symmetric in leads width for easier soldering during assembly. • IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Halogen-free • RoHS compliant • Glass passivated junction • Pb-free E4 means 2nd level interconnect is Pb-free and the terminal finish material is silver Note: 1. Rated IPP measured with 8/20μS pulse. Additional Infomarion Functional Diagram Datasheet Bi-direcctional Resources Samples Electrical Characteristics (T =25°C unless otherwise noted) Part Numbers AK6 - 030C AK6 - 058C AK6 - 066C AK6 - 076C AK6 - 170C AK6 - 190C AK6 - 240C AK6 - 380C AK6 - 430C A Max. Clamping Max. Max. Temp Test Max. Typical Reverse Breakdown Standoff Agency Voltage Reverse Coefficient Capacitance Approval Current IR @ Part Voltage Voltage (V ) @ I V @ I Peak Pulse Leakage BR T CL pp O OF V I 0 Bias 10kHz Marking (VSO) 85 C T BR Current (IPP) (Note 1) (IR) @VSO Volts (µA) O µA Min Volts Max Volts (mA) VCL Volts IPP Amps (%/ C) (nF) 6 - 030C 6 - 058C 6 - 066C 6 - 076C 6 - 170C 6 - 190C 6 - 240C 6 - 380C 6 - 430C 30 58 66 76 170 190 240 380 430 10 10 10 10 10 10 10 10 10 Note: Using 8/20µS wave shape as defined in IEC 61000-4-5. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 15 15 15 15 15 15 15 15 15 32 64 72 85 180 200 250 401 440 37 70 80 95 220 245 285 443 490 10 10 10 10 10 10 10 10 10 90 110 120 140 260 290 340 520 625 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 6,000 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 11.0 8.0 6.0 6.5 2.8 2.5 2.0 1.4 1.0 X X X X X X X X X Transient Voltage Suppression Diodes Axial Leaded – 6kA > AK6 series Physical Specifications Flow/Wave Soldering (Solder Dipping) Weight Contact manufacturer Case Epoxy encapsulated Terminal Silver plated leads, solderable per MIL-STD-750 Method 2026 Peak Temperature : 265OC Dipping Time : 10 seconds Soldering : 1 time Wave Solder Profile Figure 1 - Non Lead-free Profile Figure 2 - Lead-free Profile 300 300 250 250 TEMPERATURE (ºC) TEMPERATURE (ºC) Maximum Wave 260C Maximum Wave 240C 200 150 100 50 200 150 100 50 0 0 0.5 1 1.5 2 2.5 3 3.5 0 4 0 TIME(MINUTES) 0.5 1 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 4 - Surge Response 100 80 Current (kA) Percent of Rated Value Figure 3 - Peak Power Derating 60 40 20 0 0 25 50 75 100 TJ - Initial Junction Temperature (ºC) 125 Voltage (V) continues on next page. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 Transient Voltage Suppression Diodes Axial Leaded – 6kA > AK6 series Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) A Figure 5 - Typical Peak Pulse Power Rating Curve Figure 6 - Typical VBR Vs Junction Temperature 10000 12 10 8/20µs 1000 10/350µs AK6-076C 100 10/1000µs 10 8 Percent of VBR Change PPPM-Peak Pulse Power (kW) AK6-430C 6 4 2 0 -2 -4 -6 -8 1 0.00001 0.0001 -50 0.001 -25 0 25 50 75 100 125 Junction Temperature(Tj ) td-Pulse Width (sec.) Figure 7 -Surge Response (8/20 Surge current waveform) Figure 8 - Pulse Waveform IPP – Peak Pulse Current – %IPP Voltage Current Time (µs) Note: The power dissipation causes a change in avalanche voltage during the surge and the avalanche voltage eventually returns to the original value when the transient has passed. Peak Value 100 tr = rise time to peak value td = decay time to half value tr x td =8/20µs 50 Half Value 0 0 tr td t – Time (µs) Dimensions A G L2 F L1 D C B C E Dimensions Inches Millimeters A B C D E F 0.950 +/- 0.040 0.095 +/- 0.024 0.236 +/- 0.040 0.570 max. 0.050 +/- 0.002 0.500 max. 24.15 +/- 1.00 2.4 +/- 0.60 6.00 +/- 1.00 14.48 max. 1.270 +/- 0.05 12.70 max. G - 030C 0.161 +/- 0.040 4.10 +/- 1.00 G - 058C/066C 076C 0.189 +/- 0.040 4.8 +/- 1.00 G - 170C/190C G - 240C G - 380C/430C L1/L2 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15 0.320 +/- 0.040 8.13 +/- 1.00 0.370 +/- 0.040 9.4 +/- 1.00 0.543 +/- 0.040 13.8 +/- 1.00 L1= L2 tolerance +/- 0.04 inch (1.0 mm) Transient Voltage Suppression Diodes Axial Leaded – 6kA > AK6 series Part Marking System Part Marking LF YWW Littelfuse Logo Trace Code Marking Y:Year Code WW: Working Week Code Apply to P/N listed below: AK6-170C AK6-190C AK6-240C AK6-380C AK6-430C 6-xxxx 6-XXXX Littelfuse Logo LF YWW Apply to P/N listed below: AK6-030C AK6-058C AK6-066C AK6-076C Trace Code Marking Part Marking Y:Year Code WW: Working Week Code Type 1- Side View Type 2 - Top View Packing Options Part Numbering System AK6 - XXXX Series Type Stand Off Voltage (Please Refer to Electrical Characteristics Chart) Part Number Component Package Quantity Packaging Option AK6-XXXX AK Package 56pcs/Box Bulk AK6-XXXX-12 AK Package 12pcs/Box Bulk © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15