View

Preliminary
Product Specifications
Q68 Series
High Power LED Driver
Total Power
70 Watts max.
Input Voltages
110 ~ 277VAC
Number of Outputs One
ANZ#: Z215, January 30, 2014
SPECIAL FEATURES







Universal Input range from 100VAC~304VAC, 50/60Hz
Versatile mechanical design maximizes design flexibility.
Size: XP: TBD / XM:108.3x76.3x30mm (LxWxH)
Fully potted, suitable for dry and damp location applications
4 in 1 Dimming Control plus “ENABLE” input
UL8750 and CE compliant (pending)
Wide selection of pre-adjusted C/C outputs (factory setting)
Picture Not Available
ENVIRONMENTAL
Operating temperature:
-40 to +50 ⁰ C, Tc: 80 ⁰ C
Storage temperature:
-40 to +85 ⁰ C
Humidity (Non-Condensing):
5% to 95%
Cooling:
Convection
Vibration Frequency:
5 to 50 Hz
MTBF:
>100,000 Hours at full load and 25ºC ambient conditions
(TELC3 – Telcordia SR-332, Issue 3)
Picture shown above is not to scale
SPECIFICATIONS :
Input Range : 100 ~ 277VAC
Power Factor: > 0.92 at 65% to 100% load, 115VAC or 230VAC
Input Current : 0.83 Amps max. at 115VAC
Output Current Regulation : ±3%
Protection : OCP, SCP, OLP – Auto Recovery
Control : 0-10V dimmer; PWM (250-3KHz); Potentiometer; Enable
Hold up time: Half cycle min. at 120VAC and 80% rated load
Frequency : 47 to 63Hz
Inrush Current : 35.0 Amps max. at 230VAC, cold start 25⁰C
Efficiency : 87% Typical
Maximum Power : 70W
Leakage Current : 50uA typ.
Dimension: XP: TBD / XM:108.3x76.3x30mm (LxWxH)
Regulation Compliance: UL8750 or EN61347, EN55015, EN61547
MODEL SELECTION :
Constant Voltage Mode
V (DC)
A (mA)
Max. W
Model Number
24, ±5%
2830
70
Q68-U24-Xz
36, ±5%
1880
70
Q68-U36-Xz
48, ±5%
1410
70
Q68-U48-Xz
Notes:
1. “Xz” is optional : “Blank” = 5VA plastic case ; “Xp” =
94V-0 plastic case ; “Xm” = stud-mount metal case
1. yyyy = Output current
Constant Current Mode
A (mA)
V (DC)
Max. W
Model Number
Q68-U24-Cyyyy-Xz
Q68-U30-Cyyyy-Xz
Q68-U36-Cyyyy-Xz
Q68-U42-Cyyyy-Xz
Q68-U48-Cyyyy-Xz
Q68-U54-Cyyyy-Xz
Q68-U72-Cyyyy-Xz
3150 ~ 1450
2500 ~ 1200
2080 ~ 950
1780 ~ 810
1560 ~ 710
1380 ~ 630
1050 ~ 480
14 ~ 24
19 ~ 30
23 ~ 36
27 ~ 42
30 ~ 48
34 ~ 54
47 ~ 72
70
70
70
70
70
70
70
Dimming Wiring Diagram 10K ohm (min)
potentiometer
Maximum current
required: 1mA max
per LF1048 driver.
(+)
LED Driver
+V out
(RED)
-V out
(BLACK)
DIM+
(PURPLE)
DIM(GRAY)
+10V OUT
(YELLOW)
DIM+
(PURPLE)
DIM(GRAY)
NC/CAP
+10V OUT
(YELLOW)
LED Driver
+V out
(RED)
-V out
(BLACK)
(-)
LED Driver
+V out
(RED)
-V out
(BLACK)
www.magtechind.com Tel: 702‐364‐9998
(+)
DIM+
(PURPLE)
(-)
DIM(GRAY)
Typically
6mA.
+10V OUT
(YELLOW)
(+)
PWM Controller
PWM
(250Hz~2KHz)
DIM+
(PURPLE)
(-)
Maximum
current
output:
DIM(GRAY)
DIMMER
(sinking)
DIMMER
(sourcing)
NC/CAP
LED Driver
+10V OUT
(YELLOW)
+V out
(RED)
-V out
(BLACK)
1 of 2 De-rating Temp. vs. Load Efficiency vs. Load Power Factor vs. Load THD vs. Load PWM Dimming Curve 1-10V Dimming Curve MECHANICAL SPECIFICATION : Q68-UXX-CYYYY -XP, plastic enclosure
-XP, metal stud-mount enclosure (Preliminary) 5.01 [127.3]
5.43 [138.0]
4.74 [120.3]
Units: IN [mm]
4.26 [108.3]
0.16 [4.0]
0.16 [4.0]
R0.12 [R3.0]
Units: IN [mm]
0.28 [7.0]
1.61 [40.8]
1.26 [32.0]
R0.20 [R5.0]
0.20 [5.0]
1.62 [41.3]
1.85 [47.0]
3.00 [76.3]
5.20 [132.2]
R0.07 [R1.8]
1.02 [26.0]
0.81 [20.5]
Rec 0.43x0.63
[11.0x16.0]
0.43 [11.0]
Rec 0.43x1.02
[11.0x26.0]
www.magtechind.com Tel: 702‐364‐9998
1.18 [30.0]
2.00 [50.8]
2 of 2