Preliminary Product Specifications Q58 Series High Power LED Driver Total Power 60 Watts max. Input Voltages 110 ~ 277VAC Number of Outputs One ANZ#: Z214, January 30, 2014 SPECIAL FEATURES Universal Input range from 100VAC~304VAC, 50/60Hz Versatile mechanical design maximizes design flexibility. Size: XP: TBD / XM:108.3x76.3x30mm (LxWxH) Fully potted, suitable for dry and damp location applications 4 in 1 Dimming Control plus “ENABLE” input UL8750 and CE compliant (pending) Wide selection of pre-adjusted C/C outputs (factory setting) Picture Not Available ENVIRONMENTAL Operating temperature: -40 to +50 ⁰ C, Tc: 80 ⁰ C Storage temperature: -40 to +85 ⁰ C Humidity (Non-Condensing): 5% to 95% Cooling: Convection Vibration Frequency: 5 to 50 Hz MTBF: >100,000 Hours at full load and 25ºC ambient conditions (TELC3 – Telcordia SR-332, Issue 3) Picture shown above is not to scale SPECIFICATIONS : Input Range : 100 ~ 277VAC Power Factor: > 0.92 at 65% to 100% load, 115VAC or 230VAC Input Current : 0.72 Amps max. at 115VAC Output Current Regulation : ±3% Protection : OCP, SCP, OLP – Auto Recovery Control : 0-10V dimmer; PWM (250-3KHz); Potentiometer; Enable Hold up time: Half cycle min. at 120VAC and 80% rated load Frequency : 47 to 63Hz Inrush Current : 35.0 Amps max. at 230VAC, cold start 25⁰C Efficiency : 87% Typical Maximum Power : 60W Leakage Current : 50uA typ. Dimension: TBD Regulation Compliance: UL8750 or EN61347, EN55015, EN61547 MODEL SELECTION : Constant Voltage Mode V (DC) A (mA) Max. W Model Number 24, ±5% 2400 60 Q58-U24-Xz 36, ±5% 1600 60 Q58-U36-Xz 48, ±5% 1200 60 Q58-U48-Xz Notes: 1. “Xz” is optional - “Blank” = 5VA plastic case ; “Xp” = 94V-0 plastic case ; “Xm” = stud-mount metal case 1. yyyy = Output current Constant Current Mode A (mA) V (DC) Max. W Model Number Q58-U24-Cyyyy-Xz Q58-U30-Cyyyy-Xz Q58-U36-Cyyyy-Xz Q58-U42-Cyyyy-Xz Q58-U48-Cyyyy-Xz Q58-U54-Cyyyy-Xz Q58-U72-Cyyyy-Xz 2650 ~ 1200 2100 ~ 1000 1780 ~ 800 1500 ~ 700 1350 ~ 600 1150 ~ 510 880 ~ 400 14 ~ 24 19 ~ 30 23 ~ 36 27 ~ 42 30 ~ 48 34 ~ 54 47 ~ 72 60 60 60 60 60 60 60 Dimming Wiring Diagram 10K ohm (min) potentiometer Maximum current required: 1mA max per LF1048 driver. (+) LED Driver +V out (RED) -V out (BLACK) DIM+ (PURPLE) DIM(GRAY) +10V OUT (YELLOW) DIM+ (PURPLE) DIM(GRAY) NC/CAP +10V OUT (YELLOW) LED Driver +V out (RED) -V out (BLACK) (-) LED Driver +V out (RED) -V out (BLACK) www.magtechind.com Tel: 702‐364‐9998 (+) DIM+ (PURPLE) (-) DIM(GRAY) Typically 6mA. +10V OUT (YELLOW) (+) PWM Controller PWM (250Hz~2KHz) DIM+ (PURPLE) (-) Maximum current output: DIM(GRAY) DIMMER (sinking) DIMMER (sourcing) NC/CAP LED Driver +10V OUT (YELLOW) +V out (RED) -V out (BLACK) 1 of 2 De-rating Temp. vs. Load Efficiency vs. Load Power Factor vs. Load THD vs. Load PWM Dimming Curve 1-10V Dimming Curve MECHANICAL SPECIFICATION : Q58-UXX-CYYYY -XP, plastic enclosure -XP, metal stud-mount enclosure (Preliminary) 5.01 [127.3] 5.43 [138.0] 4.74 [120.3] Units: IN [mm] 4.26 [108.3] 0.16 [4.0] 0.16 [4.0] R0.12 [R3.0] Units: IN [mm] 0.28 [7.0] 1.61 [40.8] 1.26 [32.0] R0.20 [R5.0] 0.20 [5.0] 1.62 [41.3] 1.85 [47.0] 3.00 [76.3] 5.20 [132.2] R0.07 [R1.8] 1.02 [26.0] 0.81 [20.5] Rec 0.43x0.63 [11.0x16.0] 0.43 [11.0] Rec 0.43x1.02 [11.0x26.0] www.magtechind.com Tel: 702‐364‐9998 1.18 [30.0] 2.00 [50.8] 2 of 2