8 7 6 4 5 REVISIONS THIS DRAWING AND THE INFORMATION CONTAINED WITHIN IT ARE CONFIDENTIAL AND MAY NOT BE COPIED OR DISCLOSED WITHOUT THE WRITTEN PERMISSION OF LITTELFUSE. F 1 2 3 ZONE PDM NOTES: 1. MATERIAL: THERMOPLASTIC, UL94 V-0 2. OPERATING TEMPERATURE RANGE: -40 ℃ TO +85 ℃ 3. MATE WITH TYCO AMP MCP 2.8 FEMALE TERMINAL, FLR CABLE FOLLOW ISO 6722 CLASS C AND DIN 72511, DETAIL SEE CHART BELOW 4. SIX (6) TERMINAL PORTS ARE CAPABLE OF HOLDING THREE (3) MINI FUSES OR A COMBINATION OF MIMI FUSES, MCASE, AND MINI CIRCUIT BREAKERS 5. 2.8MM BLADES RATED FOR MAXIMUM 40A (AT 20℃ AMBIENT TEMPERATURE),TOTAL MAXIMUM CURRENT 120A 6. TPAS AND METAL BRACKET(868-964) TO BE PACKED ALONG WITH THE HOLDER SEPARATELY IN BULK, AND THE BASE WITH COVER,YELLOW LATCH, AND SEAL INSTALLED 7. OPTIONAL TETHER (89000470) TO BE INSTALLED WITH THE PIN ON COVER AND THE PIN ON THE BASE 8. OPTIONAL BRACKET (868-984) CAN BE SOLD SEPARATELY 9. CAPABLE OF 25A CONTINUOUS CURRENT 10. MOUNTING TORQUE: 5.5-6.5NM, USING M6 BOLT& LOCK WASHER 11. INGRESS PROTECTION RATING: IP67 REV. DESCRIPTION DATE APPROVED A PER EC # : INITIAL RELEASE 10/16/2015 D.CHENG F E E 70.85±0.15 D D 64.31±0.2 C C OPTIONAL: MCASE ADAPTER (875-584) WILL NEED IF USING MCASE FUSE IN 2.8MM TERMINAL 29.33±0.15 B B 67±0.15 36.38±0.15 NOTE:DESIGN AND APPLICATION FOR TE AMP MCP 2.8 FEMALE TERMINAL,DETAILS AS BELOW WIRE SPEC: DIN 72551 AND ISO 6722, CLASS B A Wire Size range(mm2) Insulation Diameter(mm) FLR Material and Finish 0.35-0.50 0.5-1.0 1.0-2.5 1.2-1.4 1.4-2.1 2.2-3.0 1-xxx-1/1-xxx-3 1-xxx-1/1-xxx-2/1-xxx-3 1-xxx-1/1-xxx-3 Part Number Strip Form TE Cable Seal Part Number 968882 968855 968857 Cable Seal Plug 828904-1 828904-2 828905-1 828922-1 DIMENSIONS ARE SHOWN IN MILLIMETERS. DIMENSIONS AND TOLERANCES ARE DEFINED ACCORDING TO ANSI/ASME Y14.5-1994. ● CPK DENOTES PRODUCTS CRITICAL CHARACTERISTICS DENOTES CPK DIMENSIONS MINIMUM CPK VALUE DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE.PROCEDURE FOR MEASUREMENTAND TRACKINGTO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS ST Cable Seal Color DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE CP TOLERANCES UNLESS OTHERWISE SPECIFIED (REF.ISO2768-M) Blue White Natural Material and Finish: 1-xxx-1 = CuNiSi, pre-tin plated : 1-xxx-2 = CuNiSi, selective gold plated : 1-xxx-3 = CuNiSi, selective silver plated DIMENSION - TOLERANCES - NAME UP TO 0.5 - 3 7 6 UP TO OVER 3 - 6 0.1 UP TO 6 - 30 0.1 0.2 OVER UP TO 30 - 120 0.3 OVER UP TO 120 - 400 ANGLE 0.5 0.5 DATE DRAWN D.CHENG CHECKED - - - - - - - - A 2/18/2016 No.6 Xinghai Street,Suzhou Industry Park,China Phone +86 512 6761 3189 Fax +86 512 6761 1489 TITLE HWB6 ASSY MARKET THIRD ANGLE PROJECTION SIZE C DO NOT SCALE DRAWING 8 OVER 5 4 3 2 DWG. NO. OL-PDM32000ZXM SCALE 1:1 SHEET 1 OF 3 1 REV. A 8 7 6 4 5 1 2 3 REVISIONS THIS DRAWING AND THE INFORMATION CONTAINED WITHIN IT ARE CONFIDENTIAL AND MAY NOT BE COPIED OR DISCLOSED WITHOUT THE WRITTEN PERMISSION OF LITTELFUSE. ZONE REV. DESCRIPTION DATE APPROVED A PER EC # : INITIAL RELEASE 10/16/2015 D.CHENG F F E E 1 6 2 9 D D 3 8 7 4 OPTIONAL: MCASE ADAPTER (875-584) WILL NEED IF USING MCASE FUSE IN 2.8MM TERMINAL C 9 8 NO. MCASE FUSE MCASE ADAPTER COMPONENT NAME C 1 1 QTY 5 HWB6 P/N PDM32001ZXM PDM32002ZXM PDM32003ZXM PDM32004ZXM 1 1 1 1 2 SILICON RUBBER 1 1 COVER 1 NO. COMPONENT NAME QTY 3 MARKET VERSION B BRACKET NEW TETHER HOLDER TPA BASE YELLOW LATCH WITH GRIP 7 6 5 4 CLEAR COVER BLACK COVER X X X X BRACKET X X 2 B DIMENSIONS ARE SHOWN IN MILLIMETERS. DIMENSIONS AND TOLERANCES ARE DEFINED ACCORDING TO ANSI/ASME Y14.5-1994. ● CPK DENOTES PRODUCTS CRITICAL CHARACTERISTICS DENOTES CPK DIMENSIONS MINIMUM CPK VALUE DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE.PROCEDURE FOR MEASUREMENTAND TRACKINGTO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS ST DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE CP TOLERANCES UNLESS OTHERWISE SPECIFIED (REF.ISO2768-M) DIMENSION - TOLERANCES - A NAME UP TO 0.5 - 3 OVER UP TO OVER 3 - 6 0.1 UP TO 6 - 30 0.1 0.2 OVER UP TO 30 - 120 0.3 OVER UP TO 120 - 400 ANGLE 0.5 0.5 DATE DRAWN D.CHENG CHECKED - - - - - - - - A 2/18/2016 No.6 Xinghai Street,Suzhou Industry Park,China Phone +86 512 6761 3189 Fax +86 512 6761 1489 TITLE HWB6 ASSY MARKET THIRD ANGLE PROJECTION SIZE C DO NOT SCALE DRAWING 8 7 6 5 4 3 2 DWG. NO. OL-PDM32000ZXM SCALE 1:1 SHEET 2 OF 3 1 REV. A 8 7 6 4 5 1 2 3 REVISIONS THIS DRAWING AND THE INFORMATION CONTAINED WITHIN IT ARE CONFIDENTIAL AND MAY NOT BE COPIED OR DISCLOSED WITHOUT THE WRITTEN PERMISSION OF LITTELFUSE. ZONE REV. DESCRIPTION DATE APPROVED F ASSEMBLY STEPS(FOR CUSTOMER ASSEMBLY USE ONLY) F STEP1:OPEN THE YELLOW LATCHES BY HAND OR A SIMPLE TOOL LIKE SCREW DRIVER, AND REMOVE COVER, STEP2: PUT CABLE THROUGH THE CABLE SEAL AND STRIP THE CABLE AND CRIIMP THE CABLE AND CABLE SEAL WITH TYCO 2.8MM TERMINAL. STEP3: BEND THE CABLE TO 2 LINES AND MAKE THE TPA GO THROUGH SMOOTHLY AND THEN PUSH THE CABLE AND TERMINAL TO BASE CABLE CAVITIES UNTIL HEAR A CLICK SOUND, THEN SNAPPING TPA TO BASE, STEP1 E STEP4: INSERT 3 MINI FUSES OR COMBINATION OF MINI FUSE, MCASE FUSE(NEED ADAPTER), AND MINI CIRCUIT BREAKER, E STEP5: ASSEMBLE THE COVER (SEAL SEATED BY LATCHES) WITH BASE AND SNAPPING THE YELLOW LATCH, STEP4 STEP6: OPTONAL: ASSEMBLE THE BRACKET TO BASE. STEP 5 D D STEP 6 C C B B STEP 3 DIMENSIONS ARE SHOWN IN MILLIMETERS. DIMENSIONS AND TOLERANCES ARE DEFINED ACCORDING TO ANSI/ASME Y14.5-1994. ● CPK STEP 2 DENOTES PRODUCTS CRITICAL CHARACTERISTICS DENOTES CPK DIMENSIONS MINIMUM CPK VALUE DENOTES A CHARACTERISTIC THAT PROVIDES AN INDICATION OF PROCESS PERFORMANCE.PROCEDURE FOR MEASUREMENTAND TRACKINGTO BE DEFINED IN LITTELFUSE INSPECTION INSTRUCTIONS ST DENOTES CP DIMENSIONS, -MINIMUM CP VALUE MUST BE WITHIN THE DIMENSIONAL LIMITATIONS SHOWN ON DRAWING AND INITIALLY LOCATED TO ALLOW FOR MAXIMUM TOOL LIFE CP TOLERANCES UNLESS OTHERWISE SPECIFIED (REF.ISO2768-M) DIMENSION - TOLERANCES - A NAME UP TO 0.5 - 3 OVER UP TO OVER 3 - 6 0.1 UP TO 6 - 30 0.1 0.2 OVER UP TO 30 - 120 0.3 OVER UP TO 120 - 400 ANGLE 0.5 0.5 DATE DRAWN - - CHECKED - - - - - - - - A No.6 Xinghai Street,Suzhou Industry Park,China Phone +86 512 6761 3189 Fax +86 512 6761 1489 TITLE HWB6 ASSY MARKET THIRD ANGLE PROJECTION SIZE C DO NOT SCALE DRAWING 8 7 6 5 4 3 2 DWG. NO. OL-PDM32000ZXM SCALE 1:1 SHEET 3 OF 3 1 REV. A