ABF-04 SERIES AC/DC Power Module 4W FEATURES ►Ultra-compact Dimensions: 36.5x27x17.1 mm (1.44x1.06x0.67”) ►Fully encapsulated Module with Solder Pins for PCB Mounting ►Universal Input 85-264 VAC, 47-440 Hz ►Eco Design, compliant to Energy Star specification and ErP Directive 2009/125/EC ►Single and Dual Output Models ►Protection Class ll ►Safety Approval to cUL/UL/IEC/EN 60950-1 ►Over Load and Over Voltage Protection ►3 Year Product Warranty PRODUCT OVERVIEW The MINMAX ABF-04 series is a new range of fully encapsulated AC/DC power supply modules. They are designed for direct PCB mounting with solder pins. The product features EMI-filter to EN55022, class B and EMS compliance to the EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. The ABF-04 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Output Number Voltage Output Current ABF-04D53 ABF-04D125 ABF-04D12 ABF-04D15 Max. capacitive Efficiency Load VDC 3.3 5 9 12 15 24 +5 +3.3 +12 +5 ±12 ±15 ABF-04S03 ABF-04S05 ABF-04S09 ABF-04S12 ABF-04S15 ABF-04S24 Input Current Max. @Max. Load mA 1200 800 444 333 267 167 600 150 250 120 ±166 ±133 mA(typ.) 82 82 77 76 76 76 72 72 76 76 (typ.) @Max. Load μF 1200 800 440 330 260 160 5600 4700 330 4700 # 330 # 260 # For each output % 70 72 75 76 76 77 72 75 77 77 Input Specifications Parameter Model Input Voltage Range Input Frequency Range All Models Input Voltage Range No-Load Power Consumption Inrush Current (Cold Start at 25℃) E-mail:[email protected] 2014/07/17 REV:8 Typ. Max. Unit 85 --- 264 VAC 47 --- 440 Hz 120 --- 370 VDC W --- --- 0.3 115VAC --- --- 15 A 230VAC --- --- 25 A Tel:886-6-2923150 Page 1 of 3 Min. ABF-04 SERIES AC/DC POWER MODULE 4W Output Specifications Parameter Output Voltage Accuracy Line Regulation Conditions Min. Typ. Max. Unit Single and Dual Output Models ABF-04D53 & ABF-04D125 Single and Dual Output Models ----------------------No min. Load required --------- ±1.0 ±2.0 ±0.5 ±0.5 ±1.0 ±1.0 ±0.5 ±0.5 ±2.5 100 0.8 ±2.0 ±5.0 ±1.0 ±1.0 ±3.0 ±1.5 ±1.0 ±1.0 ±5.0 150 1.0 % % % % % % % % % mV P-P %VPP of Vo --- --- %Inom. 25 120 ±0.01 --- ----±0.02 5 %Inom. % of Vo %/℃ %Vout --- %Inom. Vo1 Vo2 ABF-04D53 & ABF-04D125 3.3VDC Output Model 5~24VDC and Dual Output Models Load Regulation Vo1 Vo2 3.3V & 5VDC Output Models Other Output Models ABF-04D53 & ABF-04D125 Ripple & Noise 0-20 MHz Bandwidth Single Output and Dual +/- Output Models Minimum Load Dual +/+ Output Models Zener diode clamp Over Voltage Protection Temperature Coefficient Overshoot Foldback, auto-recovery 105 --(long term overload condition may cause damage) Hiccup mode, indefinite (automatic recovery) Current Limitation Short Circuit Protection General Specifications Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) EMC Emission Conditions Input to Output, 60 Seconds 500 VDC MIL-HDBK-217F@25℃, Ground Benign Conducted and radiated Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EMC Immunity according EN61000-6-1 EN61000-4-6 EN61000-4-8 EN61000-4-11 Protection Class II Safety Approvals Min. Typ. Max. Unit 3000 ----VAC 100 ----MΩ --130 --KHz --20 --ms 330,000 ----Hours EN 55011 class B, EN 55022 class B, FCC part 15 class B Specification Requirement Performance Criteria Air ±8KV Cont. ±4KV B 80~1000MHz, 10V/m 80% AM, 1KHz modulation A AC port ±2KV DC, SL, TL ±2KV not less than 1 min. B 1.2/50μS(8/20μS) AC dif. ±1KV DC ±0.5KV B 0.15~80MHz, 10Vrms (functional earth ports included) B 80% AM, 1KHz modulation 50Hz/60Hz, 30A/m A 30%, 10ms B 60%, 100ms, 95%, 5000ms C According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 Input Fuse All Models External Fuse (Recommended) 1A Slow – Blow Type Environmental Specifications Parameter Temperature Range (operational) Power Derating Storage Temperature Range Over Temperature Protection Cooling Humidity (non condensing) E-mail:[email protected] 2014/07/17 REV:8 Ambient +50℃ to +60℃ Conditions -25℃ -40℃ at 90℃ (automatic recovery at 67℃) Free-Air convection --- Tel:886-6-2923150 Page 2 of 3 +60℃ 0.3W / ℃ +85℃ 95 % rel. H ABF-04 SERIES AC/DC POWER MODULE 4W Notes 1 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 2 These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power 3 We recommend to protect the converter by a slow blow fuse in the input supply line. supplies however they may not meet all listed specifications. 4 Other input and output voltage may be available, please contact factory 5 Specifications are subject to change without notice Package Specifications Mechanical Dimensions Pin Connections 2x3.75 [2x0.15] Pin D12/D15 D53/D125 NC 2 NC +Vout +Vout +Vout1 4 4 -Vout Common Common 5 5 No Pin -Vout +Vout2 Bottom View 0.60 [0.02] 3 36.5 [1.44] 3 14.00 [0.55] 25.25 [0.99] 2 Single Output 1 6 AC(N) 7 AC(L) 7.50 [0.30] 6 7.50 [0.30] 1 21.00 [0.83] 27.0 [1.06] ►All 3.75 [0.15] 3.00 [0.12] 7 dimensions in mm (inches) ►Tolerance: ±0.5 4.0 [0.16] 17.1 [0.67] ►Pin (±0.01) diameter 0.6 ±0.1 (0.02±0.004) Physical Characteristics Case Size : Case Material : 36.5x27.0x17.1mm (1.44x1.06x0.67 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 26g 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] Minmax Technology Co., Ltd. 2014/07/17 REV:8 Page 3 of 3