Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series 220 Series, Lead-Free 2AG Special Fuse RoHS Pb PS E ® Description The 2AG Special Fuses with various voltage ratings, provide special electric performance as required. Features • In accordance with underwriter’s Laboratories Standard UL 248-14 • Available in cartridge and axial lead format with various forming dimensions • RoHS compliant and Lead-free Applications Agency Approvals Agency PS E Agency File Number Ampere Range E10480 0003,0004,0010,0011, 0025,0029,0030,0031, 0036 E10480 0007,0012,0013,0019, 0044,0045,0059,0060, 0061 NBK200405-E10480A/B/C/D NBK110512-E10480A/B NBK210405-E10480E/F 1A - 3.5A 4A - 5A 6A - 7A 29862 0003,0004,0007,0010, 0011,0013,0019,0029, 0044 ® 0003-0061 Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Electrical Characteristics for Series % of Ampere Rating Amp code Opening Time 100% 135% 200% 0007,0012,0013,0019, 0031,0036,0037,0044, 0054,0060,0061 4 hours, Minimum 1 hour, Maximum 1 sec., Maximum % of Ampere Rating Amp code Opening Time 0025,0030,0038,0040, 0045,0059 4 hours, Minimum 1 hour, Maximum 3 secs., Minimum 20 secs., Maximum % of Ampere Rating Amp code Opening Time 100% 150% 0.9A 0010 4 hours, Minimum 15 mins, Maximum 90 secs., Maximum % of Ampere Rating Amp code Opening Time 0.6A 0003,0004,0011 90 secs., Maximum % of Ampere Rating Amp code Opening Time 0.6A 2A 6A 0029 90 secs., Maximum 2 secs., Maximum 0.5 sec., Maximum 100% 135% Additional Information 200% Datasheet Resources Samples © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 09/10/15 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Electrical Characteristics 0.35 0.35 3 0003 0004 0007 0.55 0010 250 0.35 2 5 3 0011 0012 0013 0019 250 350 300 350 1.25 0025 250 0.35 0.375 0.3 0.5 0.75 5 0029 0030 0031 0036 0037 0038 250 250 250 300 300 250 0.5 0040 250 1 0044 350 2 0045 350 7 0.5 0.75 0059 0060 0061 350 350 350 Interrupting Rating 35A@250Vac, 10KA@125Vac 100A@350Vac, 60A@530Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 35A@250Vac, 10KA@125Vac 100A@350Vac 100A@350Vac, 100A@125Vdc 100A@250Vac, 10KA@125Vac, 10KA@125 Vdc 35A@250Vac, 10KA@125Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 35A@300Vac, 10KA@125Vac 50A@250Vac 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 100A@350Vac 100A@250Vac, 100A@350Vac, 10KA@125Vac, 10KA@125Vdc 100A@350Vac / 160A@140Vdc 35A@350Vac Temperature Re-rating Curve Agency Approvals Nominal Cold Resistance (Ohms) Nominal Melting 2 I t (A2 sec) 1.3100 1.3100 0.0317 0.490 0.490 4.62 X X 0.4945 2.04 1.3100 0.0497 0.0186 0.0317 0.49 1.50 17.0 4.62 0.1460 15.4 X 1.3100 1.1685 0.5900 0.2650 0.1520 0.0186 0.490 0.82 0.0300 0.365 1.05 267 X X X X 0.6935 1.58 PS E ® X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 0.1027 2.22 X X 0.0698 30.0 X X X X X 0.0116 0.2650 0.1520 464 0.365 1.05 X X X X X X X Average Time Current Curves 100 .250A .375A .500A .750A 1.0A 1.5A 2.0A 2.5A 3A 4A 5A 6A 7A 8A 10A Amp Code Max Voltage Rating (V) 250 250 350 .100A .200A Ampere Rating (A) TIME IN SECONDS 10 1 0.1 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.01 0.001 0.1 1 10 100 CURRENT IN AMPERES 1000 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/15 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 Wave Parameter 260 240 Lead-Free Recommendation Preheat: 220 (Depends on Flux Activation Temperature) 200 180 160 140 120 100 80 60 40 (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: Preheat Time: 150°C 60-180 seconds Solder Pot Temperature: 260°C Max. Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: 230 240 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 0 20 20 10 Temperature (°C) - Measured on bottom side of board 300 Time (Seconds) Note: These devices are not recommended for IR or Convection Reflow process. Cooling Time Preheat Time Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Dwell Time Product Characteristics Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper Material Operating Temperature -55 ºC to +125 ºC Terminal Strength MIL-STD-202, Method 211, Test Condition A Solderability MIL-STD-202 method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Thermal Shock MIL-STD-202, Method 107, Test Condition B: (5 cycles - 65ºC to 125ºC) Vibration MIL-STD-202, Method 201 Humidity Dimensions Salt Spray MIL-STD-202, Method 103, Test Condition A: High RH (95%) and Elevated Temp (40 ºC) for 240 hours MIL-STD-202, Method 101, Test Condition B Part Numbering System 220 000P Series 4.2 - 4.8 (.16" - .19”) .635 ± .06 (.025" ± .002”) 4.2 - 4.8 (.16" - .19”) 14.1 - 14.9 (.56" - .59”) For 02200029MXP 14.1 - 14.9 (.56" - .59”) Length L Length L: 1. TYP.38.1±1(1.50”±.04”) 2. 24.8±1(.98”±.04”) 3. 27.8±3(1.09”±.12”) 4. 34.9±1(1.37”±.04”) 14.1 - 14.9 (.56" - .59”) For MXP For T1 For T2 For T3 4.2 - 4.8 (.16" - .19”) .635 ± .06 (.025" ± .002”) 20 ± 1.5 (.79" ± .059”) For 02200019MXP 15 ± 1.2 (.591" ± .047”) Note: Please contact Littelfuse for other lead length or forming type. Packaging Packaging Option Bulk Bulk Reel and Tape Reel and Tape Reel and Tape Reel and Tape Reel and Tape Reel and Tape Packaging Specification N/A N/A EIA 296-E EIA 296-E EIA 296-E EIA 296-E EIA 296-E EIA 296-E © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/10/15 Quantity 1000 1000 1000 1500 1500 1500 1500 2500 Quantity & Packaging Code MX MXSL MRT1 DAT1 DRT1 DRT2 DRT3 ERT1 Reel Size N/A N/A 53mm (2.087”) 53mm (2.087”) 53mm (2.087”) 63mm (2.500”) 73mm (2.874”) 53mm (2.087”)