Triple Balanced Mixer Model MM4xxN-1 Multi-Octave Band RF 1.5 to 9.0 GHz Model MM4xxN-1 Electrical Specifications: (1) Conditions Parameter SSB Conversion loss:(2) (3) RF (GHz) 2.0-8.0 2.0-8.0 1.5-9.0 Isolation LO to RF: LO (GHz) 2.0-8.0 2.0-8.0 1.5-9.0 Specifications IF (MHz) 10-2000 10-4500 10-4500 1.5-9.0 1.5-4.5 4.5-9.0 1.5-9.0 1.5-9.0 1.5-9.0 1.5-9.0 10-4500 10-4500 Input Third Order Intercept Point: 1.5-9.0 1.5-9.0 10-4500 LO Power: (4) 1.5-9.0 1.5-9.0 10-4500 LO to IF: RF to IF: IF to RF: Input 1 dB Compression Point: 1.5-9.0 Min Typical 6.3 dB 7.3 dB 8.0 dB 10 dB 20 dB 20 dB 17 dB 27 dB 30 dB 23 dB 25 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55 C to +100 °C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100 °C and improves less than 0.5 dB at -55 °C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM4xxN-1 Outline: N Max 7.5 dB 8.5 dB 10.5 dB MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM4 8 MM44 MM46 MM47 MM48 LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Typical Performance at 25 °C All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 REV A 10/28/09