Model MM4xMS Model MM4xMS-15 Triple Balanced Mixer Multi-Octave Band Electrical Specifications RF 1.5 to 9.0 GHz (1) : Conditions Parameter SSB Conversion loss:(2) (3) RF(GHz) 2.0-9.0 1.5-9.0 Isolation LO to RF: LO to IF: RF to IF: IF to RF: Input 1-dB Compression Point: Input Third Order Intercept Point: LO Power: (4) LO(GHz) 2.0-9.0 1.5-9.0 IF(MHz) 10-2000 10-4000 1.5-9.0 3.0-9.0 1.5-9.0 Specifications Min Typical 6.0 dB 6.5 dB Max 7.5 dB 9.0 dB 15 dB 20 dB 22 dB 22 dB 27 dB 35 dB 31 dB 42 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 1.5-9.0 1.5-9.0 1.5-9.0 10-4000 10-4000 1.5-9.0 1.5-9.0 10-4000 1.5-9.0 1.5-9.0 10-4000 LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. 5. See Application Note M112, for aid in selecting the outline and for mounting and installation information. MM4xMS Outline: MS3AL Typical Performance at 25˚C z MM4xMS-15 Outline: MS3BL 0.38 MICROWAVE INC. M SP All dimensions are in inches and [mm]. ECTRU A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532 www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 614