Triple Balanced Mixer Model MM9xxG-3 RF 2.0 to 18.0 GHz Ultra-Broadband Electrical Specifications : (1) Specifications Conditions Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1 dB Compression Point: RF (GHz) 2.0-18.0 2.0-18.0 2.0-18.0 LO (GHz) 2.0-18.0 IF (MHz) 10-4000 2.0-4.0 4.0-18.0 2.0-18.0 2.0-18.0 Min 15 dB 20 dB 20 dB 10-4000 Input Third Order Intercept Point: 2.0-18.0 2.0-18.0 10-4000 LO Power: (4) 2.0-18.0 2.0-18.0 10-4000 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xxG-3 Outline: G Typical 7.3 dB 20 dB 27 dB 28 dB 22 dB +2 dBm +5 dBm +8 dBm +12 dBm +15 dBm +11 dBm +14 dBm +17 dBm +21 dBm +24 dBm +7 dBm +10 dBm +13 dBm +17 dBm +21 dBm Max 9.5 dB MM93 MM94 MM96 MM97 MM98 MM93 MM94 MM96 MM97 MM98 Model MM9xxG-3 LO Power 3 = +7 dBm 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors MM93 MM94 MM96 MM97 MM98 Typical Performance at 25˚C All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 REV A 1/14/10