Model # MM9xxG-30 Double Balanced Mixer Multi-Octave Band: RF 6.0 to 18.0 GHz Electrical Specifications⁽¹⁾ RF (GHz) 6.0-18.0 6.0-18.0 7.0-16.0 6.0-18.0 Parameter SSB Conversion loss:⁽²⁾⁽³⁾ Isolation Low to RF: Specifications Conditions LO (GHz) IF (GHz) 4.0-18 DC-2000 4.0-18 DC-3000 7.0-18.0 DC-4000 4.0-18.0 DC-4000 Min 4.0-16.0 4.0-18.0 4.0-18.0 Low to IF: RF to IF: 25 dB 20 dB 20 dB Typical 5.5 dB 6.0 dB 6.2 dB 6.5dB Max 7.5 dB 8.0 dB 8.0 dB 8.5dB 40 dB 38 dB 27 dB 28 dB 6.0-18.0 Input 1 dB Compression Point: 6.0-18.0 4.0-18.0 DC-4000 Input Third Order Intercept Point: 6.0-18.0 4.0-18.0 DC-4000 LO Power:⁽⁴⁾ 6.0-18.0 4.0-18.0 DC-4000 +1 dBm +4 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +22 dBm +7 dBm +10 dBm +14 dBm +19 dBm MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 Ordering Information M M 9 X LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm X G 3 0 Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Rev Date: 10/9/2015 © API Technologies Corp. Proprietary Information Page # 1 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected] Model # MM9xxG-30 Outline Drawings All dimensions are in inches and [mm]. Typical Performance at 25°C Rev Date: 10/9/2015 © API Technologies Corp. Proprietary Information Page # 2 | www.apitech.com | micro.apitech.com | +1.888.553.7531 | [email protected]