more than you expect Würth Elektronik ICS GmbH & Co. KG Intelligent Connecting Systems Zeilbaumweg 15 · 74613 Öhringen · Germany Tel.+49 (0) 79 41 92 05-0 · Fax+49 (0) 79 41 92 05-39 [email protected] · www.we-online.com Central Electrical Unit 16-0 Module Ref : 63487A REDLINE Features • Power supply 12 or 24 V onto 1 power element (+Power) • 16 ATO fuseholders (up to 25 A) • Cable harness connection on the rear side of the module via JPT/MCP compatible, 3 row/ 21 way connector Front View Options • Fuses or circuit breakers • Frame for modular board assembly Rear View Applications Common functions such as lights, radio, clock, accessories, lightning etc. Page 1 of 3 more than you expect Central Electrical Unit 16-0 Module 102 mm Dimensions Approximate component size (depending on components) 60 mm Technical Data Temperature range -40°C to +80°C Max. supply current Max. 80 A by 65°C ambient Max. 70 A by 80°C ambient Output connection JPT/MCP compatible, 3 row/21 way black connector Input connection (power stud) Power element female M5 16 pins Max. mounting torque: 2,2 Nm Recommended wire section* Current ≤ 15A: 7,5A per mm² Current > 15A: 5A per mm² * Refer to the selected cable specification Page 2 of 3 more than you expect Central Electrical Unit 16-0 Module Electrical Schematic ! Fuse Rate Table Fuse connected to +Power Amperate Max. 5 7.5 A 9 15 A 2 25 A Max. current on board should not exceed 70 A Connector: 1 black JPT 21 (X201) Female connector required for cable harness connection (view on cable entry) Male Plug on board Pin outs on the connector correspond to the associated component on the board. (e.g.: component F209 is connected to pin 19 from connector X201) Page 3 of 3