more than you expect Würth Elektronik ICS GmbH & Co. KG Intelligent Connecting Systems Zeilbaumweg 15 · 74613 Öhringen · Germany Tel.+49 (0) 79 41 92 05-0 · Fax+49 (0) 79 41 92 05-39 [email protected] · www.we-online.com Central Electrical Unit 9-2 Module Ref : 63489A REDLINE Features • Power supply 12 or 24V onto 1 power element (+Power) • 7 ATO fuseholders (up to 15A) • 2 ATO fuseholders (15 A & 30A) for relay protection • 2 mini-relay bases • Cable harness connection on the rear side of the module via JPT/MCP compatible, 3 row/ 18 way connector Front View Options • Fly wheel diode (SM4007) in parallel of relays coil • Fuses or circuit breakers • Frame for modular board assembly • Standard relays Rear View Applications Common functions such as lights, fuel pump, radio, clock, accessories, HVAC, ABS, lightning etc. Page 1 of 3 more than you expect Central Electrical Unit 9-2 Module 102 mm Dimensions Approximate component size (depending on components) 60 mm Technical Data Temperature range -40°C to +80°C Max. supply current Max. 70 A by 65°C ambient Max. 65 A by 80°C ambient Output connection JPT/MCP compatible, 3 row/18 way brown connector Input connection (power stud) Power element female M5 16 pins Max. mounting torque: 2,2 Nm Recommended wire section* Current ≤ 15A: 7,5A per mm² Current > 15A: 5A per mm² * Refer to the selected cable specification Page 2 of 3 more than you expect Central Electrical Unit 9-2 Module Electrical Schematic ! Max. current on board should not exceed 65 A Fuse Rate Table Fuse connected to +Power Amperate Max. 1 5A 2 7.5 A 1 10 A 3 15 A 1 30 A Stand alone fuse Amperate Max. 1 15 A Connector: 1 brown JPT 18 (X601) Female connector required for cable harness connection (view on cable entry) Male Plug on board Pin outs on the connector correspond to the associated component on the board. (e.g.: component F608 is connected to pin 16 from connector X601) Page 3 of 3