more than you expect Würth Elektronik ICS GmbH & Co. KG Intelligent Connecting Systems Zeilbaumweg 15 · 74613 Öhringen · Germany Tel.+49 (0) 79 41 92 05-0 · Fax+49 (0) 79 41 92 05-39 [email protected] · www.we-online.com Central Electrical Unit Traffic Regulation Module Ref : 95873 REDLINE Features • Power supply 12V or 24V onto 2 power elements +Bat (top; max. 90 A) and +IGN (+APC/bottom; max. 35 A) • Relay bases for: - 4 Micro relays - 4 Mini relays • 2 x 9-way relay bases for flasher unit, wiper, programmable relays etc. • 1 pluggable bridge for relay combinations • 18 ATO fuseholders (up to 15A) • Cable harness connector on the rear side of the module (JPT/MCP compatible, 3 row connectors) • On-board fuse-tester Front View Options • Fly wheel diode (SM4007) in parallel of relay coil • Fuses or circuit breakers • Frame for modular board assembly • Standard relays Rear View Applications All the mandatory and common functions for off-highway and on-highway vehicles such as lighting, flasher, horn, wash/wipe, beacon, radio, clock, HVAC, accessories etc. Page 1 of 5 more than you expect Central Electrical Unit Traffic Regulation Module Dimensions Approximate component size (depending on components) Technical Data Temperature range -40°C to +80°C Max. supply current: +BAT/30 (Power elements M5) Input on 1 Power element: Max. 70A by 80°C ambient Input on 2 Power elements: Max. 110A by 65°C ambient Max. 90A by 80°C ambient Max. supply current: +IGN(+APC)/15 (Power element M5) Max. 35A by 65°C ambient Max. 25A by 80°C ambient Output connection JPT/MCP compatible 3 row, 3 colors coded (1x9 pins, 1x12 pins, 2x15 pins, 1x18 pins) connectors Input connection (power stud) Power element M5 female 16 pins Max. mounting torque: 2,2 Nm Recommended wire section* Current ≤ 15A: 7,5A per mm² Current > 15A: 5A per mm² * Refer to the selected cable specification Page 2 of 5 more than you expect Central Electrical Unit Traffic Regulation Module Electrical Schematic 1/2 Pin outs on the connector correspond to the associated component on the board. (e.g.: component F209 is connected to pin 19 from connector X201) Page 3 of 5 more than you expect Central Electrical Unit Traffic Regulation Module Electrical Schematic 2/2 Pin outs on the connector correspond to the associated component on the board. (e.g.: component F209 is connected to pin 19 from connector X201) Page 4 of 5 more than you expect Central Electrical Unit Traffic Regulation Module Connector: 1 JPT 18 black (X101) Female connector required for cable harness connection (view on cable entry) Male Plug on board Connector: 1 JPT 9 black (X104) Connector: 1 JPT 12 black (X102) Connector: 1 JPT 15 blue (X105) Connector: 1 JPT 15 brown (X103) Pin outs on the connector correspond to the associated component on the board. (e.g.: component F113 is connected to pin 1 from connector X101) Page 5 of 5