VERIFICATION OF COMPLIANCE This Verification of Compliance is hereby issued to the product designated below. Product AC/DC Power Module Model APM Series Data Applies To APM-40S05; APM-40S05C; APM-40S12; APM-40S12C; APM40S15; APM-40S15C; APM-40S24; APM-40S24C; APM-40D12; APM-40D12C; APM-40D15; APM-40D15C Brand Applicant MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan Manufacturer MINMAX TECHNOLOGY CO., LTD. No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan Applicable Standard(s) EN 61204-3: 2000 EN 61000-3-2: 2006+A2:2009; EN 61000-3-3: 2008 IEC 61000-4-2:2008; IEC 61000-4-3:2010; IEC 61000-4-4:2012; IEC 61000-4-5:2005; IEC 61000-4-6:2008; IEC 61000-4-11:2004 Reference No. T121030N02-C-E Test Laboratory Compliance Certification Services Inc. (Tainan Lab.) No.8,Jiucengling, Xinhua Dist., Tainan City 712, Taiwan (R.O.C.) This device has been tested and found to comply with the stated standard(s), which is(are) required by the Council Directive of 2004/108/EC. The test results are indicated in the test report and are applicable only to the tested sample identified in the report. Jeter Wu / Assistant Manager Tainan Lab. Date: November 14, 2013 EC-Declaration of Conformity The following equipment: AC/DC Power Module ( Product Name ) APM Series; APM-40S05; APM-40S05C; APM-40S12; APM-40S12C; APM-40S15; APM-40S15C; APM-40S24; APM-40S24C; APM-40D12; APM-40D12C; APM40D15; APM-40D15C / ( Model Designation / Brand Name ) MINMAX TECHNOLOGY CO., LTD. ( Manufacturer Name ) No. 18, Sin-Sin Road, An-Ping Industrial District, Tainan, 702 Taiwan ( Manufacturer Address ) is hereby confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive (2004/108/EC). For the evaluation regarding the Electromagnetic Compatibility (2004/108/EC) the following standards are applied: EN 61204-3: 2000 EN 61000-3-2: 2006+A2:2009; EN 61000-3-3: 2008 IEC 61000-4-2:2008; IEC 61000-4-3:2010; IEC 61000-4-4:2012; IEC 61000-4-5:2005; IEC 61000-4-6:2008; IEC 61000-4-11:2004 The following manufacturer / importer or authorized representative established within the EUT is responsible for this declaration: ( Company Name ) ( Company Address ) Person responsible for making this declaration: ( Name, Surname ) ( Position / Title ) ( Place ) ( Date ) ( Legal Signature )