LF9392-002 Datasheet

Specification for an SMD Low Profile LC Filter
MtronPTI P/N: LF9392-002
I. General & Electrical Requirements:
Center Frequency (FON): 1920MHz
1.0dB Passband: 1420MHz to 2420MHz, minimum
Insertion Loss (@ the peak of transmission within the 1.0dB Passband): ≤ 2.5dB
Passband VSWR: 1.5:1 maximum
Rejection (ref. to IL)
DC to 700MHz: 60dB minimum\
3200MHz to 5000MHz: 60 dB minimum
Power Handling: ≤ 1-watt CW
ZIN/ZOUT: 50Ω nominal
II. Environmental & Physical Requirements:
1. Temperature Range:
Operating: -40C to +85C
Storage: -45C to +90C
2. Humidity: ≤ 95% non-condensing
3. Solderability: Per EIAJ-STD-002
4. Package: SMD
Material:
Body: Milled Aluminum with silver plate
Cover: Chromated Aluminum
Seal: Laser Sealed
Dimensions: See Drawing
Supports Automated assembly processing. Including ; pick & place, reflow soldering and post reflow wash.
Can be provided on tape & reel for quantities of 100-units or greater.
Page 1 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence.
Information may not be copied or divulged without written permission from MtronPTI.
Specification for an SMD Low Profile LC Filter
MtronPTI P/N: LF9392-002
III. Recommended Solder Reflow Profile:
IV. Data Sheet Revision Table:
Date
12/18/12
Rev.
0
Author
BRM
Details of Revision
Original Release
Page 2 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence.
Information may not be copied or divulged without written permission from MtronPTI.