Download Datasheet

Specification for an SMD LC Band Reject Filter
MtronPTI P/N: LF9403
I. General & Electrical Requirements
1. Upper Passband Characteristics:
Passband @ 4dB: 20.1MHz to 30.0MHz
Passband @ 6dB: 20.05MHz to 20.1MHz
Return Loss: 10dB minimum
2. Band Reject Characteristics
16dB: 19.0Hz to 19.9MHz
3. Signal Level: +20dBm (CW) with a 2:1 load
4. ZIN/ZOUT: 50Ω nominal
Note: All performance parameters are to be validated at the prototype build.
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -40C to +85C
Storage: -45C to +90C
2. Vibration: 10g
3. Solderability: Per EIAJ-STD-002
4. Package (see Figure 1):
Size: 2.000” (L) x 0.600” (W) x 0.500” (H)
Figure 1 – Suggested Filter Package Outline & Recommended PAD Layout Drawings
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI
Specification for an SMD LC Band Reject Filter
MtronPTI P/N: LF9403
III. Design Simulation Plots:
IV. Maximum Solder Reflow Profile:
V. Data Sheet Revision Table:
Date
06/18/12
Rev.
-
Author
BRM
Details of Revision
Initial Release.
Page 2 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI