Specification for an LC Filter MtronPTI P/N: LF9414 I. General & Electrical Requirements: 1. Center Frequency (FON): 254.5MHz 2. Passband: 239MHz to 270MHz, minimum 3. Insertion Loss (Across the 239MHz to 270MHz Passband): ≤ 1.5dB 4. Passband Return Loss(Over 239MHz to 270MHz Passband): 15dB, minimum 5. Rejection (ref. to IL @ FON) DC to 210MHz: 25dB minimum 300MHz to 2000MHz: 25dB minimum 6. Power Handling: ≤ 2-watt CW 7. ZIN/ZOUT: 50Ω nominal II. Environmental & Physical Requirements: 1. Temperature Range: Operating: -40C to +85C Storage: -45C to +90C 2. Package: 0.500” (L) x 0.500” (W) x 0.350” (H) SMD (ref. Figure 1 & Figure 2) Figure 2: Recommended PAD Layout Figure 1: Package Outline Drawing Figure 3: Maximum Reflow Profile Page 1 of 2 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI. Specification for an LC Filter MtronPTI P/N: LF9414 III. Design Simulation Plots: IV. Data Sheet Revision Table: Date Rev. Author 11/08/12 1 BRM 11/06/12 0 BRM Details of Revision Updated the Package Outline Drawing (Figure 1.) to improve clarity on pad function designations and the part marking information. Initial Release. Page 2 of 2 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI.