Download Datasheet

Specification for an SMD LC Filter
MtronPTI P/N LFS9182
I. GENERAL & ELECTRICAL REQUIREMENTS:
1. CENTER FREQUENCY (FO): 457MHz nominal
2. PASSBAND: FO ±37MHz
3. INSERTION LOSS (420MHz to 494MHz): < 3.0dB
4. RETURN LOSS: < 15dB
5. REJECTION
DC to 330MHz: 40dB minimum
539MHz to 1000MHz: 40dB minimum
6. MAXIMUM INPUT POWER: 1-Watt
7. ZIN/ZOUT : 50Ω nominal
II. ENIVIRONMENTAL & PHYSICAL REQUIREMENTS:
1. TEMPERATURE RANGE
Operating: -40°C to +85°C
Storage: -55°C to +85°C
2. ALTITUDE:
Operating: Sea Level to 35000-feet
Storage: Sea Level to 50000-feet
3. HUMIDITY (operating): 90% non-condensing
4. SHOCK (survival): 9G
5. PACKAGE See Drawing
6. SOLDERABILITY: Per EIAJ-STD-002 (see Figure 1)
Figure 2 – Recommended PAD Layout
Figure 1 – Outline Drawing
Rev. - 04/30/09
Page 1 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is
submitted in confidence. Information may not be copied or divulged without written
permission from MtronPTI.
Specification for an SMD LC Filter
MtronPTI P/N LFS9182
IV. REFLOW SOLDER PROFILE:
Rev. - 04/30/09
Page 2 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is
submitted in confidence. Information may not be copied or divulged without written
permission from MtronPTI.