SPECIFICATION FOR A LUMPED ELEMENT (LC) FILTER MtronPTI P/N 9100R I. GENERAL & ELECTRICAL REQUIREMENTS: 1. 2. 3. 4. 5. 6. 7. 8. 9. CENTER FREQUENCY (FC): 2050.0MHz PASSBAND @ 2.0dB: 1600.0MHz to 2500.0MHz INSERTION LOSS (@ peak of transmission): 2.0dB maximum PASSBAND RIPPLE (peak-valley): 0.5dB maximum RETURN LOSS: -15dB minimum from 1600.0MHz to 2500.0MHz PASSBAND GROUP DELAY RIPPLE: 8ηsec REJECTION (minimum) 60dB @ DC to 1100.0MHz 40dB @ 1350.0MHz 40dB @ 2900.0MHz 60dB @ 3600.0MHz to 6000.0MHz MAXIMUM INPUT POWER: 30dBm ZIN/ZOUT: 50Ω nominal II. ENIVIRONMENTAL & PHYSICAL REQUIREMENTS: 1. Figure 1 TEMPERATURE OPERATING: -40°C to +110°C STORAGE: -55°C to +120°C 2. SHOCK: Per MIL-STD-202, Method 213, Condition C 3. VIBRATION: Per MIL-STD-202, Method 201 & 204 4. MAXIMUM SOLDERING CONDITIONS: See Figure 1. 5. SOLDERABILITY: Per EIAJ-STD-002 6. PACKAGE: SMD (Reference outline drawing) RoHS Compliant - The filter body will be silver plated milled aluminum Aluminum alloy type 1100-0 per QQ-A250/1 or equivalent Plated with silver per ASTM B 700 (MIL-C-26074)) - Sn10 solder will be utilized through out the construction of the filter DIMENSIONS Rev. - 10/31/07 Page 1 of 1 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI.