SPECIFICATION FOR A SMD BANDPASS LC FILTER MtronPTI P/N LF9288 I. GENERAL & ELECTRICAL REQUIREMENTS: 1. 2. 3. 4. 5. 6. 7. CENTER FREQUENCY (FO): 750.0MHz PASSBAND (@ 2dB): FO 200MHz INSERTION LOSS (@ peak of transmission from 550MHz thru 950MHz): ≤ 1.0dB PASSBAND RIPPLE: <1.0dB VSWR (from 550MHz thru 950MHz): 2.0:1 or less REJECTION (minimum) 40dB @ <450MHz 40dB @ >1050MHz ZIN/ZOUT: 50 Nominal II. ENIVIRONMENTAL & PHYSICAL REQUIREMENTS: 1. 2. 3. TEMPERATURE RANGE Operating: -40°C to +85°C Storage: -55°C to +125°C SOLDERABILITY: Per EIAJ-STD-002 SMD PACKAGE: See drawing DIMENSIONS Figure 2: Recommended PAD Layout Figure 1: LF9288 Outline Drawing Revised: December 10, 2010 Rev. - Page 1 of 1 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI.