M9200 Ultra Low Jitter Quad Frequency Oscillator FEATURES APPLICATIONS No clock input required (plug & play!) 4 simultaneous outputs LVPECL output RMS Phase Jitter 120 fs Max, 12kHz to 20MHz (all four outputs) Low Phase Noise (-154 dBc/Hz @ 1MHz offset) rd 3 Overtone design technology Full RoHS directive -40°C to +85°C operating temperature range 10/40/100 Gigabit Ethernet ASIC/FPGA Interface Telecom Networking Description: MtronPTI’s M9200 simultaneously provides 4 differential (for LVPECL) or single ended (for CMOS) outputs. The M9200 does not require an external input clock source, just simply connect supply power and ground (plug & play!). The low noise internal clock source provides a best in class maximum RMS jitter specification of 100fs. Environmental & Packaging Requirements: Operating Temperature Storage Temperature Mechanical Shock Vibration Thermal Cycle Hermeticity Solderability Max. Soldering Conditions Package Type Copyright © 2014 MtronPTI. All rights reserved. TA -40 +85 °C TS -50 +125 °C Per MIL-STD-202, Method 213, Condition E Per MIL-STD-202, Method 204D, Condition D Per MIL-STD-883, Method 1011, Condition A Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium) Per EIAJ-STD-002, Method 208 See solder profile, Figure 1 10-pad 9.6 X 11.51 mm leadless FR-4. RoHS compliant. Rev. 20150812 | Page 1 of 4 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000 M9200 Ultra Low Jitter Quad Frequency Oscillator Electrical Specifications: Parameter Frequency of Operation Symbol FO Min. Typ. 156.250000 Max. Units MHz Conditions Frequency Stability Frequency Stability F/F Aging -50 -5 +50 ppm +5 ppm Includes initial tolerance @ +25°C, deviation over operating temperature, variations to supply voltage, load, vibration and shock. 1st year RF Output Output Type Output Load LVPECL Compatible 50 Ω to (Vcc-2.0) VDC Symmetry (duty cycle) VOH 45 Logic Level “1” Logic Level “0” Differential Output Voltage VOH TDC VOD Vcc-1.40 Rise/Fall Time TR/TF Start-up Time TSU 0.5 0.2 V 55 % Vcc-1.620 0.9 V V V 0.4 nS 10 mS Ref. to 50% of waveform 20% to 80% of waveform Tambient = +25°C Supply Voltage & Power Consumption Operating Voltage Supply Current VCC ICC Copyright © 2014 MtronPTI. All rights reserved. 3.3 3.465 220 Phase Noise -70 -100 -125 -141 -154 -155 RMS Jitter Phase Noise (measured @ 156.25MHz) Phase Jitter (RMS) 3.135 ΦJ dBc/Hz 0.120 Rev. 20150812 | Page 2 of 4 V mA pS @ 10 Hz @ 100 Hz @ 1 kHz @ 10 kHz @ 100 kHz @ 1 MHz 12KHz to 20MHz 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000 M9200 Ultra Low Jitter Quad Frequency Oscillator Output Waveform: Marking, Pin Out: Line 1 Line 2 Line 3 Part Marking M9200S001 156.2500 MHz M yyww yy ww Legend Year Work Week Dimensions: Copyright © 2014 MtronPTI. All rights reserved. Rev. 20150812 | Page 3 of 4 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000 M9200 Ultra Low Jitter Quad Frequency Oscillator SSB Phase Noise Plot: Recommended reflow Profile: Figure 1 Copyright © 2014 MtronPTI. All rights reserved. Rev. 20150812 | Page 4 of 4 2525 Shader Road, Orlando FL 32804 Mtronpti.com 407-298-2000