M2702/M2703 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR FEATURES APPLICATIONS LVPECL/LVDS Differential Output Low RMS Jitter Performance 12 kHz to 20 MHz (1 ps max, 156.25 MHz) RoHS 6/6 Compliant 10G Reference NIC Card Ethernet Test and Measurement Ordering Information: Temperature Range Product Family (Supply Voltage Option) Code 6 2 M2702 (3.3V) M2703 (2.5V) Value -20 °C to +70 °C -40 °C to +85 °C Example: M270224BPN 100.000000 MHz M2702 2 Stability Code 3 4 6 8 Enable/Disable Value ±100 ppm ±50 ppm ±25 ppm ±20 ppm Code B Logic Type Value Enable High (pad 1) 4 Code P L B Value LVPECL LVDS Package/Lead Configuration Code N P Value Leadless Frequency MHz XXX.XXXXXX N 100.000000 LVPECL Electrical Specifications: Parameter Frequency of Operation Symbol FO Min. 10 Typ. Max. 800 Units MHz Conditions Frequency Stability Frequency Stability Aging F/F See ordering information +3 -3 ppm 1st year RF Output Output Type Output Load Symmetry (duty cycle) Logic Level “0” Logic Level “1” Rise/Fall Time Start-up Time LVPECL Compatible 50 Ω to (Vcc-2.0) VDC VOL VOH TR/TF TSU 45 Vcc-1.85 Vcc-1.03 0.3 55 Vcc-1.63 Vcc-0.60 0.4 10 70% VCC or N/C Enable Logic (Pad 1) Disable Logic (Pad 1) 30% VCC V % V V ns ms Ref. to 50% of waveform 20% to 80% of waveform Tambient = +25°C V Output Enabled V Output Disabled to high-Z Supply Voltage & Power Consumption Operating Voltage VCC Supply Current ICC 3.135 2.375 3.300 2.500 3.465 2.625 80 V V mA (M2702) (M2703) Page 1 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. Revision 0 01/31/16 M2702/M2703 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR LVDS Electrical Specifications: Parameter Frequency of Operation Symbol FO Min. 10 Typ. Max. 800 Units MHz Conditions Frequency Stability Frequency Stability Aging F/F See ordering information +3 -3 ppm 1st year RF Output Output Type Output Load Symmetry (duty cycle) Differential Output Voltage Output Offset Voltage Rise/Fall Time Start-up Time LVDS Compatible 100 Ω Differential VOH 45 VDIFF 175 VOS TR/TF TSU 55 350 mV 1.250 0.6 10 70% VCC or N/C Enable Logic (Pad 1) Disable Logic (Pad 1) V % 30% VCC V ns ms Ref. to 50% of waveform peak-to-peak differential output voltage 20% to 80% of waveform Tambient = +25°C V Output Enabled V Output Disabled to high-Z Supply Voltage & Power Consumption Operating Voltage VCC Supply Current ICC 3.135 2.375 3.300 2.500 3.465 2.625 60 V V mA (M2702) (M2703) Environmental & Packaging Requirements: Storage Temperature Mechanical Shock Vibration Aging Humidity Thermal Cycle Hermeticity Moisture Sensitivity Level Solderability Max. Soldering Conditions Pad Termination Package Type -55°C to 125°C Per MIL-STD-202, Method 213, Condition C (100 g’s, 6 ms) Per MIL-STD-202, Method 204D, Condition C (10 g’s, 55 – 2000 Hz) +85°C ±3°C, 720H (No BIAS) +40°C ±2°CX90~95%, 96H (NO BIAS) Per MIL-STD-883, Method 1010, Condition B (-55 °C to +125 °C, 10 cycles) Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium) MSL1 Per EIAJ-STD-002, Method 208 See solder profile, Figure 1 Gold, 1 µm maximum thickness 6-pad 5.0 X 7.0 mm leadless ceramic. RoHS compliant. Page 2 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2702/M2703 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR Marking, Pin Out: Pad 1 2 3 4 5 6 Function Enable/Disable No Connection Ground Output Complementary Output +VCC Line 1 Line 2 Line 3 Part Marking [part designation] FFFMFFFF M yy ww vv M F yy ww vv Legend MtronPTI Frequency Year Work Week Factory code Dimensions: Output Waveform: Page 3 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2702/M2703 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR Typical LVPECL Test Circuit & Load Circuit Diagrams: Typical LVDS Test Circuit & Load Circuit Diagrams: Page 4 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2702/M2703 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR Soldering Conditions: Figure 1 Figure 1 Tape and Reel Specifications: Tape and Reel Specifications A B C D 5.32 7.28 1.5 7.5 E 2.2 F 4 G 8 H 16 J 178 K 13.5 L 24.8 M 80 Page 5 of 5 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.