M2058/M2059 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR FEATURES APPLICATIONS LVPECL/LVDS Differential Output RMS Phase Jitter < 100 fs, 12 kHz to 20 MHz (156.25 MHz, PECL output) Low Phase Noise rd 3 Overtone crystal technology Compliant to RoHS directive 10 Gigabit Ethernet switches/routers Network Interface Ordering Information: Temperature Range Product Family (Supply Voltage Option) Code 2 6 M2058 (3.3V) Value -40 °C to +85 °C -20 °C to +70 °C M2059 (2.5V) Stability * Code 3 4 6 8 Enable/Disable Value ±100 ppm ±50 ppm ±25 ppm ±20 ppm Code B U S Logic Type Value Enable High (pad 1) No Enable/Disable Enable High (pad 2) Code P L Value LVPECL LVDS Package/Lead Configuration Code N Example: M206024BPN 156.2500 MHz M2058 2 4 B P Stability includes initial tolerance @ +25°C, deviation over operating temperature, variations to supply voltage, load, vibration and shock. Value Leadless N Frequency XXX.XXXX MHz 156.2500 MHz LVPECL Electrical Specifications: Parameter Frequency of Operation Symbol FO Min. 25 Typ. Max. 220 Units MHz Conditions Frequency Stability Frequency Stability Aging F/F See ordering information +5 -5 ppm 1st year RF Output Output Type Output Load Symmetry (duty cycle) Logic Level “1” Logic Level “0” Rise/Fall Time Start-up Time LVPECL Compatible 50 Ω to (Vcc-2.0) VDC VOH VOH TDC TR/TF TSU 45 Vcc-1.025 Vcc-1.810 0.2 55 Vcc-0.880 Vcc-1.620 0.4 10 70% VCC or N/C Enable Logic V % V V ns ms V Disable Logic 30% VCC V Ref. to 50% of waveform 20% to 80% of waveform Tambient = +25°C Pad 1 or Pad 2: Output Enabled Pad 1 or Pad 2: Output Disabled to high-Z Supply Voltage & Power Consumption Operating Voltage Supply Current VCC ICC 3.135 3.300 3.465 75 V mA 0.100 ps Other Parameters Phase Jitter (RMS) ΦJ 12 KHz to 20 MHz 156.25 MHz Revision 1 06/10/15 Page 1 of 6 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2058/M2059 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR LVDS Electrical Specifications: Parameter Frequency of Operation Symbol FO Min. 25 Typ. Max. 220 Units MHz Conditions Frequency Stability Frequency Stability Aging F/F See ordering information +5 -5 ppm 1st year RF Output Output Type Output Load Symmetry (duty cycle) Differential Output Voltage Output Offset Voltage Rise/Fall Time Start-up Time LVDS Compatible 100 Ω Differential VOH 45 VDIFF 250 VOS TR/TF TSU 1.125 55 V % 350 450 mV 1.250 0.2 1.375 0.4 10 V ns ms 70% VCC or N/C Enable Logic V Disable Logic 30% VCC V Ref. to 50% of waveform peak-to-peak differential output voltage 20% to 80% of waveform Tambient = +25°C Pad 1 or Pad 2: Output Enabled Pad 1 or Pad 2: Output Disabled to high-Z Supply Voltage & Power Consumption Operating Voltage Supply Current VCC ICC Phase Jitter (RMS) ΦJ 3.135 3.300 3.465 40 Other Parameters V mA 0.150 ps 12 KHz to 20 MHz 156.25 MHz Environmental & Packaging Requirements: Storage Temperature Mechanical Shock Vibration Aging Humidity Thermal Cycle Hermeticity Moisture Sensitivity Level Solderability Max. Soldering Conditions Pad Termination Package Type -55°C to 125°C Per MIL-STD-202, Method 213, Condition E Per MIL-STD-202, Method 204D, Condition D +85°C ±3°C, 720H (No BIAS) +40°C ±2°CX90~95%, 96H (NO BIAS) Per MIL-STD-883, Method 1011, Condition A Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of Helium) MSL1 Per EIAJ-STD-002, Method 208 See solder profile, Figure 1 Gold, 1 µm maximum thickness 6-pad 5.0 X 7.0 mm leadless ceramic. RoHS compliant. Page 2 of 6 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2058/M2059 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR Marking, Pin Out: Pad 1 2 3 4 5 6 Function Enable/Disable or N/C Enable/Disable or N/C Ground Output Complementary Output +VCC Line 1 Line 2 Line 3 Part Marking M2058/M2059 FFFMFFFF M yy ww vv M F yy ww vv Legend MtronPTI Frequency Year Work Week Factory code Dimensions: Output Waveform: Page 3 of 6 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2058/M2059 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR Typical LVPECL Test Circuit & Load Circuit Diagrams: Typical LVDS Test Circuit & Load Circuit Diagrams: Page 4 of 6 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2058/M2059 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR Soldering Conditions: Figure 1 Figure 1 Tape and Reel Specifications: Tape and Reel Specifications A B C D 5.32 7.28 1.5 7.5 E 2.2 F 4 G 8 H 16 J 178 K 13.5 L 24.8 M 80 Page 5 of 6 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI. M2058/M2059 Series SPECIFICATION FOR 5.0x7.0mm LVPECL/LVDS SMT OSCILLATOR LVPECL Phase Noise Plot: LVDS Phase Noise Plot: Page 6 of 6 The information contained herein is proprietary to MtronPTI and is submitted in confidence. This information may not be copied or divulged without written permission from MtronPTI.