TCS Series Professional Chip Capacitor with Conductive Polymer Multianode FEATURES • Conductive polymer electrode, multianode design • Benign failure mode under recommended use conditions • Robust design for long operation lifetime • Extremely Low ESR • AVX maverick part control Q-process with statistical screening • Improved basic reliability 0.5%/1000hrs • Humidity 85°C/85%RH, Vr, 500 hours • -55 to +125°C operation temperature • DCL 0.1 CV • 3x reflow 260°C compatible • Volumetric efficiency • High frequency capacitance retention LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. APPLICATIONS • Long life time DC/DC converter applications in Telecommunications, Industrial, Avionics. For additional information on Q-process please consult the AVX technical publication “Reaching the Highest Reliability for Tantalum Capacitors” (see the link: http://www.avx.com/docs/techinfo/Qprocess.pdf) MARKING E CASE AVX LOGO Polymer Polarity Band (Anode+) Capacitance Value in pF 447 = 470µF 447 J Rated Voltage J = 6.3V XXXXX CASE DIMENSIONS: millimeters (inches) Code ID Code E EIA Code 2917 EIA Metric 7343-43 L±0.20 W+0.20 (0.008) (0.008) -0.10 (0.004) 7.30 (0.287) 4.30 (0.169) H+0.20 (0.008) -0.10 (0.004) 4.10 (0.162) W1±0.20 (0.008) 2.40 (0.094) A+0.30 (0.012) S Min. -0.20 (0.008) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. HOW TO ORDER TCS E Type Case Size See table above 477 M 006 # 0012 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% Rated DC Voltage 002 = 2.5Vdc 004 = 4Vdc 006 = 6.3Vdc Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel H = Tin Lead 7" Reel ESR in mΩ J DCL J = 0.1CV (contact manufacturer) K = Tin Lead 13" Reel (contact manufacturer) TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Temperature Range: Reliability: Termination Finish: All technical data relate to an ambient temperature of +25°C 470 μF to 1000 μF ±20% 0.1CV -55°C to +125°C 0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level Sn Plating (standard) and SnPb Plating upon request NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. 062116 1 TCS Series Professional Chip Capacitor with Conductive Polymer Multianode CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 22 226 33 336 47 476 68 686 100 107 150 157 220 227 330 337 470 477 680 687 1000 108 2.5V (e) Rated Voltage DC (VR) 4V (G) 6.3V (J) E(12) E(12) E(12) Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development – subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Case Size Capacitance (μF) Rated Voltage (V) Maximum Operating Temperature (ºC) TCSE108M002#00012J E 1000 2.5 125 TCSE108M004#0012J E 1000 4 125 TCSE477M006#0012J E 470 6.3 125 AVX Part No. DCL Max. (μA) 2.5 Volt 250 4 Volt 400 6.3 Volt 296 DF Max. (%) ESR Max @ 100kHz (mΩ) MSL 8 12 8 8 100kHz RMS Current (mA) 45ºC 85ºC 105ºC 125ºC 3 5800 4100 2600 1500 12 3 5800 4100 2600 1500 12 3 5800 4100 2600 1500 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr 100% 95% Rated Voltage 90% 85% 80% Recommended Application Voltage 75% 70% 67% 65% 60% 60% 55% 50% -55% 2 85ºC 105ºC 125ºC 062116 TCS Series Professional Chip Capacitor with Conductive Polymer Multianode QUALIFICATION TABLE TEST Endurance Storage Life Biased Humidity Temperature Stability Surge Voltage TCS series (Temperature range -55ºC to +125ºC) Characteristics Determine after application of rated voltage for Visual examination no visible damage 2000 +48/-0 hours at 105±2ºC. Also determine after DCL 1.25 x initial limit application of 125ºC temperature, 2/3 rated voltage ΔC/C within +20/-30% of initial value for 2000 +48/-0 hours. After test leaving 1-2 hours at room temperature. Power supply impedance to be DF 1.5 x initial limit ≤0.1Ω/V. ESR 2 x initial limit Visual examination no visible damage DCL 2 x initial limit 125ºC, 0V, 2000h ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 3 x initial limit Determine after leaving for 500 or 1000 hours at 85±2ºC, 85% relative humidity and rated voltage ΔC/C within +30/-20% of initial value and then recovery 1-2 hours at room temperature. DF 1.5 x initial limit ESR 2 x initial limit Condition Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +125+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 125ºC+3/0ºC Surge voltage: 1.3 x 2/3 rated voltage Charge/Discharge resistance: 1000±100Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge +20ºC -55ºC +20ºC DCL IL* n/a IL* ΔC/C n/a +0/-20% ±5% IL* 1.5 x IL* IL* DF +85ºC +125ºC +20ºC 10 x IL* 12.5 x IL* IL* +20/-0% +30/-0% ±5% 1.5 x IL* Visual examination no visible damage DCL initial limit ΔC/C within +20/-30% of initial value DF 1.25 x initial limit ESR 1.25 x initial limit 2 x IL* IL* *Initial Limit For use outside of recommended conditions and special request, please contact manufacturer. Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. 062116 3