TCN Series Conductive Polymer Solid Electrolytic Chip Capacitors Undertab Series FEATURES • Conductive polymer electrode • Benign failure mode under recommended use conditions • Lower ESR • Undertab terminations layout: - High Volumetric Efficiency - High PCB assembly density - High capacitance in smaller dimensions • 3x reflow 260°C compatible • 8 case sizes available LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • Consumer applications (e.g. mobiles, MP3 etc.) CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric L±0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) H max. WP±0.10 (0.004) WN±0.10 (0.004) AP±0.10 (0.004) AN±0.10 (0.004) S Min. N 0805 2012-10 2.05 (0.081) 1.30 (0.051) 1.00 (0.039) 1.00 (0.039) 1.00 (0.039) 0.85 (0.033) 0.85 (0.033) 0.40 (0.016) K 1206 3216-10 3.20 (0.126) 1.60 (0.063) 1.00 (0.039) 1.30 (0.051) 1.30 (0.051) 1.15 (0.045) 1.15 (0.045) 0.90 (0.035) S 1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.30 (0.051) 1.30 (0.051) 1.15 (0.045) 1.15 (0.045) 0.90 (0.035) L 1210 3528-10 3.50 (0.138) 2.80 (0.110) 1.00 (0.039) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 3.25 (0.128) 3.25 (0.128) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 3 2924 7361-15 7.30 (0.287) 6.10 (0.240) 1.50 (0.059) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) W1 dimension applies to the termination width for A dimensional area only. MARKING K, L, S, T, X CASE AVX LOGO Polymer Polarity Band (Anode+) 156 J XXXXX N CASE Rated Voltage J = 6.3V 3, 4 CASE Capacitance Value in pF 106 = 10µF Capacitance Value in pF 156 = 15µF Polarity Band (Anode+) 106 J ID Code Rated Voltage Code J = 6.3V AVX LOGO Polymer Polarity Band (Anode+) Polarity Band (Anode+) W L W Capacitance Value in pF 158 = 1500µF 158 J XXXXX H Rated Voltage J = 6.3V WP ID Code AP S AN WN AVX LOGO Polymer HOW TO ORDER TCN L Type Case Size See table above 157 M Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% 006 R Rated DC Voltage Packaging 006 = 6.3Vdc R = Pure Tin 7" Reel 016 = 16Vdc S = Pure Tin 13" Reel 025 = 25Vdc 035 = 35Vdc 0200 ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: ⱕ +85ºC: ⱕ +105ºC: ⱕ +85ºC: ⱕ +105ºC: All technical data relate to an ambient temperature of +25°C 1.0 μF to 1500 μF ±20% 0.1CV 4 6.3 10 16 25 35 3.2 5 8 13 20 28 5.2 8 13 21 33 46 4 6 10 16 25 35 -55°C to +105°C 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance 60% confidence level NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. 061316 119 TCN Series Conductive Polymer Solid Electrolytic Chip Capacitors Undertab Series CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated Voltage DC to 85°C / 0.66DC to 105°C μF 1.0 4.7 10 Code 105 475 106 4V (G) 6.3V (J) 15 22 33 156 226 336 N(500)* 47 476 N(500)* K(500)*/N(500)* K(500)*/M(250)* N(500)* 68 686 K(500)*/N(500)* K(500)*/S(500)* 100 107 K(500)*/S(500)* 150 157 220 227 330 470 337 477 G(200)*/L(200)* S(500)* G(200)*/L(150)* S(200)*/T(150)* H(150)*/T(150)* H(150)* 1000 108 1500 158 G(200)* K(200,250) L(200)/S(250) K(200)*/L(200) S(250)/T(200) H(100,200)* T(200) H(200)* X(50) X(200)/3(100) 4(55) 4(55) 10V (A) 16V (C) N(500)* N(500)* K(500)*/N(500)* L(200)/T(200) K(500)*/S(500)* L(250)/T(150,200) 25V (E) 35V (V) N(500) O* L(300)/T(200) T(200) T(200)/X* X(100)* X(100) X(100) 3(70)/4(100) 4(100) G(150)*/L(150)* S(500)* G(150)*/L(150)* S(150)*/T(150)* G(150)*/H(150)* T(150)* X(100) H(150)* 4(70) 4(70) 4(70) 4(100) Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. 120 061316 TCN Series Conductive Polymer Solid Electrolytic Chip Capacitors Undertab Series RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Cap (μF) Rated Voltage (V) Maximum Operating Temperature (ºC) TCNK107M006#0200 TCNK107M006#0250 TCNL107M006#0200 TCNS107M006#0250 TCNL157M006#0200 TCNS157M006#0250 TCNT157M006#0200 TCNT227M006#0200 TCNX477M006#0050 TCNX108M006#0200 TCN3108M006#0100 TCN4108M006#0055 TCN4158M006#0055 K K L S L S T T X X 3 4 4 100 100 100 100 150 150 150 220 470 1000 1000 1000 1500 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 105 105 105 85 105 85 105 85 85 85 105 85 85 TCNL336M016#0200 TCNT336M016#0200 TCNL476M016#0250 TCNT476M016#0150 TCNT476M016#0200 TCNX157M016#0100 TCN4227M016#0070 TCN4337M016#0070 TCN4477M016#0100 L T L T T X 4 4 4 33 33 47 47 47 150 220 330 470 16 16 16 16 16 16 16 16 16 85 85 85 85 85 85 105 105 85 TCNN475M025#0500 TCNT226M025#0200 TCNX476M025#0100 TCN3107M025#0070 TCN4107M025#0100 TCN4157M025#0070 N T X 3 4 4 4.7 22 47 100 100 150 25 25 25 25 25 25 105 105 105 105 105 105 TCNL475M035#0300 TCNT475M035#0200 TCNT106M035#0200 TCNX476M035#0100 TCN4107M035#0100 L T T X 4 4.7 4.7 10 47 100 35 35 35 35 35 105 85 85 105 105 DCL Max. (μA) DF Max. (%) 6.3 Volt @ 85°C 60 10 60 10 60 10 60 10 90 10 90 10 90 10 132 10 282 10 600 30 600 20 600 20 900 20 16 Volt @ 85°C 52.8 6 52.8 6 75.2 6 75.2 6 75.2 6 240 6 352 20 528 20 752 20 25 Volt @ 85°C 11.8 10 55 6 117.5 6 250 6 250 6 375 6 35 Volt @ 85°C 16.5 6 16.5 10 35 10 164.5 10 350 10 ESR Max. @ 100kHz (mΩ) MSL 200 250 200 250 200 250 200 200 50 200 100 55 55 100kHz RMS Current (mA) Product Category 45ºC 85ºC 105ºC 3 3 3 3 3 3 3 3 3 3 4 4 4 700 600 700 600 700 600 700 700 1900 900 1200 1860 1860 500 400 500 400 500 400 500 500 1300 600 840 1302 1302 300 300 300 – 300 – 300 – – – 480 – – 3 3 3 5 3 5 3 5 5 5 3 5 5 200 200 250 150 200 100 70 70 100 3 3 3 3 3 3 4 4 4 700 700 600 800 700 1300 1650 1650 1380 500 500 400 600 500 900 1155 1155 966 – – – – – – 660 660 – 5 5 5 5 5 5 2 3 5 500 200 100 70 100 70 3 3 3 4 4 4 400 700 1300 1440 1380 1650 300 500 900 1008 966 1155 200 300 600 576 552 660 3 3 2 2 2 2 300 200 200 100 100 3 3 3 3 4 600 700 700 1300 1380 400 500 500 900 966 300 – – 600 552 2 5 5 2 3 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 223. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr Product Category 2 Product Category 3 Product Category 5 100% 100% 100% 95% 90% 85% 80% 75% 70% Rated Voltage 95% 90% Recommended Application Voltage for Vr ≤ 10V 85% 80% Recommended Application Voltage for Vr ≥ 16V 75% 70% Rated Voltage 95% Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥ 16V 90% 85% 80% 80% 75% 72% 70% 65% 65% 60% 60% 60% 55% 55% 55% 50% -55ºC 50% -55ºC 061316 85ºC 105ºC 64% 85ºC 105ºC Rated Voltage Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥16V 65% 50% -55ºC 85ºC 121 TCN Series Conductive Polymer Solid Electrolytic Chip Capacitors Undertab Series PRODUCT CATEGORY 2, 3 (TEMPERATURE RANGE -55°C TO +105°C) TEST Condition Endurance Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours at room temperature. Also determine after application of 105ºC temperature. For CATEGORY 2: Rated voltage for 2000 +48/-0 hours For CATEGORY 3: 0.8x rated voltage for 2000 +48/-0 hours And then leaving 1-2 hours at room temperature. Power supply impedance to be ≤ 0.1Ω/V. Storage Life Humidity Temperature Stability Surge Voltage *Initial Limit 105ºC, 0V, 2000h Determine after storage without applied voltage at 65±2ºC and 95±2% relative humidity for 500hrs and then recovery 1-2 hours at room temperature. Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +105+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 105ºC+3/0ºC For CATEGORY 2: Surge voltage: 1.3x rated voltage at 105ºC For CATEGORY 3: Surge voltage: 1.3x 0.8x rated voltage at 105ºC Charge/Discharge resistance: 1000±100Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge Visual examination DCL ΔC/C DF ESR Visual examination DCL (VR ≤ 75V) DCL (VR > 75V) ΔC/C DF ESR Visual examination DCL ΔC/C DF ESR DCL ΔC/C DF Characteristics no visible damage 1.25 x initial limit within ±20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 1.25 x initial limit 2 x initial limit within ±20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 3 x initial limit within +30/-20% of initial value 1.5 x initial limit 2 x initial limit +20ºC -55ºC IL* n/a n/a +0/-20% IL* 1.5 x IL* +20ºC +85ºC +105ºC +20ºC IL* 10 x IL* 12.5 x IL* IL* ±5% +20/-0% +30/-0% ±5% IL* 1.5 x IL* 2 x IL* IL* Visual examination no visible damage DCL ΔC/C initial limit within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V DF 1.25 x initial limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55°C TO +85°C) TEST Condition Endurance Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours at room temperature. Power supply impedance to be ≤ 0.1Ω/V. Storage Life Humidity Temperature Stability Surge Voltage *Initial Limit 122 85ºC, 0V, 2000h Determine after storage without applied voltage at 65±2ºC and 95±2% relative humidity for 500hrs and then recovery 1-2 hours at room temperature. Step Temperature°C Duration(min) 1 +20±2 15 2 -55+0/-3 15 3 +20±2 15 4 +85+3/-0 15 5 +20±2 15 Test temperature: 85+3/0ºC Surge voltage: 1.3x rated voltage Charge/Discharge resistance: 1000±100Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge Visual examination DCL ΔC/C DF ESR Visual examination DCL ΔC/C DF ESR Visual examination DCL ΔC/C DF ESR DCL ΔC/C DF Visual examination DCL ΔC/C DF Characteristics no visible damage 1.25 x initial limit within ±20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 1.25 x initial limit within ±20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 5 x initial limit within +40/-20% of initial value 1.5 x initial limit 2 x initial limit +20ºC -55ºC +20ºC +85ºC +20ºC IL* n/a IL* 10 x IL* IL* n/a +0/-20% ±5% +20/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* IL* no visible damage initial limit within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V 1.25 x initial limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. 061316