M1 thru M7 Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • Glass passivated Standard rectifiers Ideal for automated placement Low forward voltage drop High forward surge capability Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified Typical Applications DO‐214AC(SMA) • For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Mechanical Data • Case:DO-214AC, molded epoxy body,Epoxy meets UL 94V-0 flammability rating • Terminal:Matte tin plated leads, solderable per J-STD-002 and JESD22B-106 • Polarity:Indicated by cathode band Maximum Ratings and Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Symbol M1 M2 M3 M4 M5 M6 M7 Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current VRRM VRMS VDC IF(AV) 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 V V V A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30.0 A VF 1.0 Volts IR 5.0 50.0 uA CJ 10.0 pF Typical thermal resistance(Note2) RθJA 75.0 ℃/W Typical yp thermal resistance(Note2) ( ) RθJL 20.0 ℃/W - 55 to + 150 °C Maximum forward voltage at IF=1.0Amps Maximum DC reverse @Ta=25℃ current at rated DC blocking @Ta=125℃ Typical junction capacitance(Note1) Operating junction and storage temperature TJ, range TSTG Notes:1.Measured at 1.0MHz and applied reverse voltage of 4.0 D.C. 2.Thermal resistance from junction to lead, 0.197×0.197〃(5.0×5.0mm)copper pads to each terminal www.goodark.com 1/4 2014.02-Rev.B M1 thru M7 Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Reverse Characteristics Figure 4. Typical Junction Capacitance Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2014.02-Rev.B M1 thru M7 Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions in inches (millimeters) www.goodark.com 3/4 2014.02-Rev.B M1 thru M7 Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, rights or any other rights, rights belonging to Suzhou Good-Ark Good Ark Electronics Co., Co Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. errors Suzhou Good-Ark Good Ark Electronics Co., Co Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce d in i whole h l or in i partt these th materials. t i l Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.02-Rev.B