M1302L S-Band Magnetron M1302L is designed for the magnetron of s-band radar system. The frequency range is fixed <3040-3060MHz> and the peak output power is 30kw Min. ---- MAXIMUM RATINGS ---Peak anode current ················· Perk anode power input ············· Duty cycle ························· Pulse duration ····················· Rate of rise of voltage pulse ······ Anode temperature ················· V.S.W.R at the output coupler ······ Min 6.0 - Max 12.0 100 0.001 1.0 130 120 1.5:1 Unit A kW µs kV/µs °C - ---- ELECTRICAL ---Heater voltage (Note 1) ········· Preheat time ···················· Peak anode voltage (Note 2) ····· Peak output power (Note 2) ······ Frequency (Note 2) ·············· Min 5.7 180 7.5 25 3040 Typical 6.3 8.0 – Max 6.9 8.5 3060 Unit V S kV kW MHz Note 1: Measured with heater voltage of 6.3V and no anode input power, the heater current 1imits are 1.1A minimum, 1.4A maximum. For average pulse input powers greater than 25 watts, the heater voltage must be reduced within 3 seconds after the application of h. t. according to the following schedule: Meat input power(W) Heater Voltage(V) Less than 25 ·············· 6.3 25 to 62 ·················· 5.3 62 to 100 ················· 4.5 Note 2: Measured at peak anode current 8.0A 95-10