Accessories Mounting accessories Reducer insert HS35 Description Allows the mounting on different diameter on the motor shaft. The basis is the standard unit with 1.00". Subsequent replacement without tools possible. Outer diameter: 1.00" Material: Aluminium Part number Reducer insert HS35 ø0.625” (ø15.875 mm) 11078639 Reducer insert HS35 ø0.75” (ø19.05 mm) 11078654 Reducer insert HS35 ø0.87” (ø22.225 mm) 11087744 Reducer insert HS35 ø10 mm 11087745 Reducer insert HS35 ø12 mm 11087746 Reducer insert HS35 ø14 mm 11148651 Reducer insert HS35 ø15 mm 11087747 Reducer insert HS35 ø16 mm 11087748 Reducer insert HS35 ø18 mm 11087750 Reducer insert HS35 ø20 mm Dimensions HS35F, HS35P - Programmable, HS35S - Sine 1.18'' (30) 1.22'' (31) ø nominal dimension inch metric inch metric (in '') (in mm) (in 1/1000'') (in µm) 0.875'' 22.225 G7 +1.10 +0.28 +28 +7 +28 +7 0.750'' 19.050 G7 +1.10 +0.28 0.625'' 15.875 G7 +0.94 +0.24 +24 +6 +24 +6 0.500'' 12.700 G7 +0.94 +0.24 0.375'' 9.525 G7 +0.79 +0.20 +20 +5 +33 0 0.787'' 20 H8 +1.30 0 0.709'' 18 H8 +1.06 0 +27 0 +27 0 0.630'' 16 H8 +1.06 0 0.551'' 15 H8 +1.06 0 +27 0 +27 0 0.551'' 14 H8 +1.06 0 0.472'' 12 H8 +1.06 0 +27 0 H8 +1.06 0 +27 0 0.394'' 1 tolerance 10 www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. Suitable for 14/4/2015 0.06'' (1.6) d 11080114 ø1.00'' (ø25.4) Reducer insert HS35 ø0.50” (ø12.7 mm) 0° Reducer insert HS35 ø0.375” (ø9.525 mm) 11078636 6x 6 11084462