Totalizers electromechanic Small impulse counters, adding Display 5- or 7-digits, with/without reset button F 503, F 513, F 523 Features –– Small impulse counter –– Adding –– Display 5- or 7-digits –– With or without reset button F 503 - Center screw mount at rear Technical data - electrical ratings 24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 12/24 VDC ±10 % Residual ripple <48 % Nominal frequency 50 / 60 Hz Power consumption 1.8 W, 2 VA Pulse ratio 1:1 Service life 10 million impulses Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-4 Interference immunity DIN EN 61000-6-2 F 523 - Front panel with spring clip 1 www.baumer.com/motion 14/5/2014 Subject to modification in technic and design. Errors and omissions excepted. F 513 - Front panel with screw mount Voltage supply Totalizers electromechanic Small impulse counters, adding Display 5- or 7-digits, with/without reset button F 503, F 513, F 523 Connection diagram Technical data - mechanical design Display White numbers on black Number of digits 5-digits with reset button 7-digits without reset button Digit height 4 mm Count mode 1 impulse = 1 count Step-by-step switching Adding in 2 half steps Measuring range 99 999 and 9 999 999 Zero setting Manual by reset button Ambient temperature 0...+45 °C Storage temperature -20...+70 °C Relative humidity 80 % non-condensing Protection DIN EN 60529 IP 41 Housing type Built-in housing Connection Stranded wires, 300 mm long Weight approx. 50 g Material Housing: Noryl PPO, black Trigger level Features Voltage DC Voltage AC Mounting Rear center screw mount Max. counting speed 10 pulses/s 5 pulses/s Dimensions W x H x L 36 x 22 x 45 mm Power 1.8 W 2 VA Cutout dimensions 36 x 22 mm Min. pulse duration 50 ms 100 ms Mounting depth 55 mm -(+) Voltage +(-) Encoder Back opinion 9 11 F 503 F 513 Front panel with 2 screws Dimensions W x H x L 45.7 x 45.7 x 43 mm Cutout dimensions 37 x 23 mm Mounting depth 43 mm 3 Alignment pin 0.5 mm high 7.5 Min. pulse interval 50 ms 100 ms Switch on time (at 25 °C) 100 % 100 % Mounting Front panel with spring clips Dimensions W x H x L 42 x 28 x 43 mm Cutout dimensions 37 x 23 mm Mounting depth 43 mm Subject to modification in technic and design. Errors and omissions excepted. F 523 2 www.baumer.com/motion 14/5/2014 Mounting 15 18 3.5 11 14 19.5 Litz connection Totalizers electromechanic Small impulse counters, adding Display 5- or 7-digits, with/without reset button F 503, F 513, F 523 Part number Center screw mount Front panel with screw mount F 503. F 513. Display C 7-digits 9 999 999 without reset button A 5-digits 99 999 A2 A3 A5 A8 A9 030B 010A Display C 7-digits 9 999 999 without reset button A 5-digits 99 999 Voltage / connection 12 VDC / Stranded wire 300 mm 24 VDC / Standard wire 300 mm 24 VAC / Standard wire 300 mm 110 VAC / Stranded wire 300 mm 230 VAC / Stranded wire 300 mm A2 A3 A5 A8 A9 Zero setting Without reset button With reset button 030B 010A Voltage / connection 12 VDC / Stranded wire 300 mm 24 VDC / Standard wire 300 mm 24 VAC / Standard wire 300 mm 110 VAC / Stranded wire 300 mm 230 VAC / Stranded wire 300 mm Zero setting Without reset button With reset button Front panel with spring clips mount F 523. Display C 7-digits 9 999 999 without reset button A 5-digits 99 999 Subject to modification in technic and design. Errors and omissions excepted. 030B 010A Voltage / connection 12 VDC / Stranded wire 300 mm 24 VDC / Standard wire 300 mm 24 VAC / Standard wire 300 mm 110 VAC / Stranded wire 300 mm 230 VAC / Stranded wire 300 mm Zero setting Without reset button With reset button 3 www.baumer.com/motion 14/5/2014 A2 A3 A5 A8 A9 Totalizers electromechanic Small impulse counters, adding Display 5- or 7-digits, with/without reset button F 503, F 513, F 523 Dimensions F 503 with reset button, 5-digits F 503 without reset button, 7-digits 36 22 22 36 45 55 45 55 F 513 with reset button, 5-digits F 513 without reset button, 7-digits ',1$I ',1$I F 523 with reset button, 5-digits F 523 without reset button, 7-digits 42 28 28 42 3 3 43 2 Subject to modification in technic and design. Errors and omissions excepted. 2 4 www.baumer.com/motion 14/5/2014 43