EN

Preset counters electromechanic
1 preset, adding
Display 6-digits, manual reset button
FE504, FE514, FE524
Features
–– Preset counter with one preset
–– Adding
–– Display 6-digits
–– With reset button
FE504 - socket box
24/110 VAC ±10 % (50/60 Hz)
230 VAC +6/-10 % (50/60 Hz)
24 VDC ±10 %
Residual ripple
<48 %
Nominal frequency
50 / 60 Hz
Pulse ratio
1:1
Service life
VDC - 100 million impulses
VAC - 50 million impulses
Preset
1 preset
Output contact
Change-over contact by
micro-switch, one-pole
Switching capacity
100 VA / 30 W
Limit switch lifetime
1 million switching cycles
Spark extinguisher
Recommended for inductive
load
Standard
DIN EN 61010‑1
Protection class II
Overvoltage category II
Pollution degree 2
Emitted interference
DIN EN 61000-6-4
Interference immunity
DIN EN 61000-6-2
FE524 - front panel with spring clip mount
1
www.baumer.com/motion
14/5/2014
FE514 - front panel with screw mount
Voltage supply
Subject to modification in technic and design. Errors and omissions excepted.
Technical data - electrical ratings
Preset counters electromechanic
1 preset, adding
Display 6-digits, manual reset button
FE504, FE514, FE524
Technical data - mechanical design
Display
White numbers on black
Number of digits
6-digits
Digit height
4.5 mm
Count mode
1 impulse = 1 count
Step-by-step switching
Adding in 2 half steps
Measuring range
999 999
Zero setting
Manual by reset button
Ambient temperature
0...+45 °C
Storage temperature
-20...+70 °C
Relative humidity
80 % non-condensing
Protection DIN EN 60529
IP 41
Connection
Connection diagram
3
4
+
(-)
(+)
Voltage
21
20
22
End contact
Trigger level
Max. counting speed 10 pulses/s
Soldering pins (flat)
Voltage
24/110VAC±10%
230VAC+6/-10%
Weight approx.
160 g
Power
3VA
Material
Housing: Noryl PPO, black
Min.pulseduration50ms
Min.pulseinterval50ms
FE504
Housing type
Socket box
Switchontime(at25°C)100%
Mounting
Socket box
Dimensions W x H x L
50 x 50 x 88.1 mm
Max. counting speed 20 pulses/s
Cutout dimensions
50 x 50 mm
Mounting depth
88.3 mm
Voltage
24VDC±10%
Power
2W
Min.pulseduration25ms
Min.pulseinterval25ms
FE514
Mounting
Front panel with 2 screws
Dimensions W x H x L
60 x 75 x 61.3 mm
Accessories
Cutout dimensions
51 x 51 mm
Mounting depth
79.7 mm
Front panels for FE504
Z 100.02A
FE524
Front panel with transparent protective cover,
for socket box 50 x 50 mm
Housing type
Built-in housing
Front frames for FE504
Mounting
Front panel with spring clips
Z 102.01A
Dimensions W x H x L
53.2 x 53.2 x 61 mm
Front frame with knob lock provided on
transparent cover
Cutout dimensions
51 x 51 mm
Z 102.02A
Mounting depth
79.7 mm
Front frame with cylinder lock provided on
transparent cover
Z 107.02A
Front frame, insertion cutout 50 x 50 mm
2
www.baumer.com/motion
14/5/2014
Built-in housing
Subject to modification in technic and design. Errors and omissions excepted.
Switchontime(at25°C)100%
Housing type
Preset counters electromechanic
1 preset, adding
Display 6-digits, manual reset button
FE504, FE514, FE524
Part number
Socket box
Front panel with screw mount
FE504. 650B
C
FE514. 650A
C
Display
C 6-digits 999 999
B3
B5
B8
B9
Display
C 6-digits 999 999
Voltage
24 VDC
24 VAC
110 VAC
230 VAC
B3
B5
B8
B9
Zero setting
650B With reset button
Voltage
24 VDC
24 VAC
110 VAC
230 VAC
Zero setting
650A With reset button
Front panel with spring clips mount
FE524. 650B
C
Display
C 6-digits 999 999
B3
B5
B8
B9
Voltage
24 VDC
24 VAC
110 VAC
230 VAC
3
www.baumer.com/motion
14/5/2014
Subject to modification in technic and design. Errors and omissions excepted.
Zero setting
650B With reset button
Preset counters electromechanic
1 preset, adding
Display 6-digits, manual reset button
FE504, FE514, FE524
Dimensions
FE514 - front panel with 2 screws
6.5
30
20.7
63
75
50.3
49.6
12.35
6.5
49.6
6
FE504 - socket box
67.4
4.85
50.3
60
61.3
2.7
FE524 - front panel with spring clip mount
1.45
6
18.4
61.3
2.7
Subject to modification in technic and design. Errors and omissions excepted.
50.3
4
www.baumer.com/motion
14/5/2014
53.2
1.45
6.5
50.3
53.2