Tachometers Rotation speed and velocity display Large 14 mm display LED, 6-digits, programmable TA200 Features –– Tachometer for rotation speed and velocity –– Display 6-digits –– Connection: One-channel digital sensor or potential-free contact –– Impulse evaluation, sensor logic programmable –– Frequencies up to 40 kHz –– Period duration measurement Technical data - mechanical design Voltage supply Ambient temperature 0...+50 °C Storage temperature -20...+70 °C Relative humidity 80 % non-condensing Connection Plug-in screw terminal connector Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 (face with seal) Operation / keypad Membrane with softkeys Housing type Built-in housing Dimensions W x H x L 96 x 48 x 124 mm Cutout dimensions 92 x 44 mm (-0.6) Mounting depth 124 mm Mounting Clip frame for built-in housing Period duration measurement Weight approx. 350 g (AC), 250 g (DC) Signal inputs Comparator inputs Material Housing: Makrolon 6485 (PC) Input logic NPN / PNP Counting frequency 25 Hz, 40 kHz programmable Scaling factor 0.0001...9999.99 Data memory >10 years in EEPROM Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Approval UL approval / E63076 24/48 VAC ±10 % (50/60 Hz) 115/230 VAC ±10 % (50/60 Hz) 24 VDC ±10 % Power consumption 7 VA, 5 W Sensor supply 12...26 VDC / max. 100 mA Display LED, 7-segment display Number of digits 6-digits Digit height 14 mm Display unit 1/s, 1/min, 1/h programmable Function Tachometers Programmable parameters Measuring units 1/h, 1/min, 1/s Scaling factor Sensor logic Pulse frequency Measuring principle 1 www.baumer.com/motion 14/5/2014 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. TA200 - LED tachometer Tachometers Rotation speed and velocity display Large 14 mm display LED, 6-digits, programmable TA200 Part number Block circuit diagram TA200.00 AXA1 Voltage supply Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 24 VDC Signal F1 5 4 3 2 1 Sensor supply max. 250 V terminal - terminal / + 3 4 Sensor supply - 5 + Measuring value F1 8 Trigger level Supply voltage 6 0V 7 +24V 8 2 Signal F1 Connection diagram 9 - Comparator input Input circuit Inputs PNP-/NPN-logic Inputlevel Programmable InputlevelLow 0...2VDC InputlevelHigh 3...40VDC Input resistance 3 kΩ - terminal Dimensions Subject to modification in technic and design. Errors and omissions excepted. 2 www.baumer.com/motion 14/5/2014