Altech UL489 TD / TS Series Molded Case Circuit Breakers UL489 Listed Molded Case Circuit Breaker • • • • • • • • • 4 Frame Sizes LISTED Compact Design E231289 Thermal Magnetic 240, 480, 600VAC 3 Poles Up to 100kA Short Circuit Interrupting Capacity Circuit Breakers are supplied with line and load terminals HACR rated CE version (without UL approval) available upon request SPECIFICATIONS Current Rating Wire Ratings TD125 15-125A / 600V AC 60°/ 75°C Cu only TS250 150-250A / 600V AC 60°/ 75°C Cu only TS400 300-400A / 600V AC 75°C Cu only TS800 500-800A / 600V AC 75°C Cu only Calibration Temperature 40°C (104°F) INTERRUPTING CAPACITY TD125 TS250 TS400 TS800 NU HU NU HU NU HU NU HU 240V 50 100 50 100 50 100 50 100 480V 35 65 35 65 35 65 35 65 600V 10 14 10 18 14 20 18 25 TERMINAL SIZE ACCEPTABILITY AND TERMINAL TORQUE Frame Types TD125 (15 - 125A) TS250 (150 - 250A) TS400 (300 - 400A) TS800 (500 - 600A) TS800 (700 - 800A) Wire Range Conductor Cross-section Number of Conductors 14 - 8 AWG 6 - 1/0 AWG 1 AWG 1/0 - 2/0 AWG 3/0 - 4/0 AWG 300 - 400 kcmil 250 - 400 kcmil 500 kcmil 3/0 AWG 250 - 500 kcmil 300 - 500 kcmil 300 - 400 kcmil 1 1 1 1 1 1 1 1 2 up to 2 up to 2 up to 3 Tightening Torque [lb.in.] 60 90 150 180 250 325 325 375 250 375 500 500 TRIP CHARACTERISTICS FTU FMU ATU 66 Fixed-Thermal Fixed-Magnetic Adjustable-Thermal Fixed-Magnetic Adjustable-Thermal Adjustable-Magnetic Rated current See trip curve pages 76-77 0.8 - 1 x current adjustable See trip curve pages 76-77 0.8 - 1 x current adjustable 5 - 10 x current adjustable Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com PART NUMBERING SYSTEM S – TD125 NU – FTU – LL – 15 Frame Type TD125: 15-125A TS250: 150-250A TS400: 300-400A TS800: 500-800A Interrupting Type NU, HU See page 66 Trip Type FTU, FMU, ATU Rated Current (A) 15, 20, ..., 800 Dimensions Frame types Basic Dimensions W x H x D [inch/mm] 3.54 x 6.46 x 3.39/90 x 164 x 86 4.13 x 7.01 x 3.39/105 x 178 x 86 5.51 x 11.5 x 4.33/140 x 292 x 110 8.27 x 16.85 x 5.31/210 x 428 x 135 W Circuit breaker D Accessories device (S-AL, S-AX, S-UVT, S-SHT) Mechanical interlock device Locking devices (Removable, Fixed) Trip units Extended rotary handle Flange handle (Cable operating handle) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Altech UL489 TD125 TS250 TS400 TS800 H DIMENSIONS 67 Altech UL489 TD / TS Series Circuit Breakers Normal Interrupting Capacity (NU) Circuit Breakers are supplied with line and load terminals Interrupting Capacity TD125 TS250 TS400 TS800 240V 50 50 50 50 480V 35 35 35 35 600V 10 10 14 18 Application Examples: Power distribution, power generation, motors, etc. Relatively short thermal trip delay and medium magnetic trip point. FTU TS250 FTU Im=2500A 250A Ir Im FTU Fixed-thermal, Fixed-magnetic Rated Current 15A 20A 30A 40A 50A 60A 80A 100A 125A 150A 160A 175A 200A 225A 250A 300A 350A 400A 500A 600A 700A 800A FMU 1848 1584 3P Type/ Cat. No. S-TD125NU-FTU-LL-15 S-TD125NU-FTU-LL-20 S-TD125NU-FTU-LL-30 S-TD125NU-FTU-LL-40 S-TD125NU-FTU-LL-50 S-TD125NU-FTU-LL-60 S-TD125NU-FTU-LL-80 S-TD125NU-FTU-LL-100 S-TD125NU-FTU-LL-125 S-TS250NU-FTU-LL-150 S-TS250NU-FTU-LL-160 S-TS250NU-FTU-LL-175 S-TS250NU-FTU-LL-200 S-TS250NU-FTU-LL-225 S-TS250NU-FTU-LL-250 S-TS400NU-FTU-LL-300 S-TS400NU-FTU-LL-350 S-TS400NU-FTU-LL-400 S-TS800NU-FTU-LL-500 S-TS800NU-FTU-LL-600 S-TS800NU-FTU-LL-700 S-TS800NU-FTU-LL-800 ATU TS250 FMU 40°C FMU* Accessories (see pages 70-72) Dimensions (see pages 73-75) Trip Curves (see pages 76-77) * 68 Im=2500A Ir Im TS250 ATU 1848 ATU* Adjustablethermal, Adjustablemagnetic 250A 40°C 3P Type/ Cat. No. S-TD125NU-FMU-LL-40 S-TD125NU-FMU-LL-50 S-TD125NU-FMU-LL-60 S-TD125NU-FMU-LL-80 S-TD125NU-FMU-LL-100 S-TD125NU-FMU-LL-125 S-TS250NU-FMU-LL-160 S-TS250NU-FMU-LL-200 S-TS250NU-FMU-LL-250 S-TS400NU-FMU-LL-300 S-TS400NU-FMU-LL-400 S-TS800NU-FMU-LL-500 S-TS800NU-FMU-LL-600 S-TS800NU-FMU-LL-800 Standard Pack: 1 Weight: TD125: 2.65 lb. TS250: 4.19 lb. 1320 TS400: 12.57 lb. TS800: 29.98 lb. 2640 Rated Current 40A 50A 60A 80A 100A 125A 160A 200A 250A 300A 400A 500A 600A 800A 1584 Standard Pack: 1 Weight: TD125: 2.65 lb. TS250: 4.19 lb. 2112 2376 1320 Adjustablethermal, Fixedmagnetic LISTED E231289 TS400: 12.57 lb. TS800: 29.98 lb. 2112 1848 1584 2376 2640 Rated Current 160A 200A 250A 300A 400A 500A 600A 800A Standard Pack: 1 Weight: TD125: 2.65 lb. TS250: 4.19 lb. Ir Im 1320 2112 2376 2640 250A 40°C 3P Type/ Cat. No. S-TS250NU-ATU-LL-160 S-TS250NU-ATU-LL-200 S-TS250NU-ATU-LL-250 S-TS400NU-ATU-LL-300 S-TS400NU-ATU-LL-400 S-TS800NU-ATU-LL-500 S-TS800NU-ATU-LL-600 S-TS800NU-ATU-LL-800 TS400: 12.57 lb. TS800: 29.98 lb. Not a stock item, please consult Altech for availability. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TD / TS Series Circuit Breakers High Interrupting Capacity (HU) Circuit Breakers are supplied with line and load terminals Interrupting Capacity TS250 TS400 TS800 240V 100 100 100 100 480V 65 65 65 65 600V 14 18 20 25 Application Examples: Power distribution, power generation, motors, etc. Relatively short thermal trip delay and medium magnetic trip point. FTU TS250 FTU Im=2500A 250A Fixed-thermal, Fixed-magnetic Rated Current 15A 20A 30A 40A 50A 60A 80A 100A 125A 150A 160A 175A 200A 225A 250A 300A 350A 400A 500A 600A 700A 800A 1848 1584 3P Type/ Cat. No. S-TD125HU-FTU-LL-15 S-TD125HU-FTU-LL-20 S-TD125HU-FTU-LL-30 S-TD125HU-FTU-LL-40 S-TD125HU-FTU-LL-50 S-TD125HU-FTU-LL-60 S-TD125HU-FTU-LL-80 S-TD125HU-FTU-LL-100 S-TD125HU-FTU-LL-125 S-TS250HU-FTU-LL-150 S-TS250HU-FTU-LL-160 S-TS250HU-FTU-LL-175 S-TS250HU-FTU-LL-200 S-TS250HU-FTU-LL-225 S-TS250HU-FTU-LL-250 S-TS400HU-FTU-LL-300 S-TS400HU-FTU-LL-350 S-TS400HU-FTU-LL-400 S-TS800HU-FTU-LL-500 S-TS800HU-FTU-LL-600 S-TS800HU-FTU-LL-700 S-TS800HU-FTU-LL-800 ATU TS250 FMU 40°C Ir Im FTU FMU 1320 FMU* Adjustable-thermal, Fixed-magnetic Accessories (see pages 70-72) Dimensions (see pages 73-75) Trip Curves (see pages 76-77) * Im=2500A 2376 2640 Ir Im TS250 ATU 1848 ATU* Adjustablethermal, Adjustablemagnetic Rated Current 160A 200A 250A 300A 400A 500A 600A 800A 250A 40°C 3P Type/ Cat. No. S-TD125HU-FMU-LL-40 S-TD125HU-FMU-LL-50 S-TD125HU-FMU-LL-60 S-TD125HU-FMU-LL-80 S-TD125HU-FMU-LL-100 S-TD125HU-FMU-LL-125 S-TS250HU-FMU-LL-160 S-TS250HU-FMU-LL-200 S-TS250HU-FMU-LL-250 S-TS400HU-FMU-LL-300 S-TS400HU-FMU-LL-400 S-TS800HU-FMU-LL-500 S-TS800HU-FMU-LL-600 S-TS800HU-FMU-LL-800 Standard Pack: 1 Weight: TD125: 2.65 lb. TS250: 4.19 lb. 1320 TS400: 12.57 lb. TS800: 29.98 lb. 2112 Rated Current 40A 50A 60A 80A 100A 125A 160A 200A 250A 300A 400A 500A 600A 800A 1584 Standard Pack: 1 Weight: TD125: 2.65 lb. TS250: 4.19 lb. LISTED E231289 TS400: 12.57 lb. TS800: 29.98 lb. 2112 1848 1584 2376 2640 Ir Im 1320 2112 2376 2640 250A 40°C 3P Type/ Cat. No. S-TS250HU-ATU-LL-160 S-TS250HU-ATU-LL-200 S-TS250HU-ATU-LL-250 S-TS400HU-ATU-LL-300 S-TS400HU-ATU-LL-400 S-TS800HU-ATU-LL-500 S-TS800HU-ATU-LL-600 S-TS800HU-ATU-LL-800 Standard Pack: 1 Weight: TD125: 2.65 lb. TS250: 4.19 lb. TS400: 12.57 lb. TS800: 29.98 lb. Not a stock item, please consult Altech for availability. Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Altech UL489 TD125 69 Altech UL489 Accessories Electrical Auxiliaries Auxiliary Switch (S-AX), Alarm Switch (S-AL) • Can be installed in all frame types Contact Operation MCCB Position of S-AX ON OFF AXa1 AXc1 AXc1 Cat. No. AXa1 AXc1 AXb1 Position of S-AL TRIP S-AX AXb1 AXa1 AXa1 AXc1 AXb1 S-AL AXb1 Installation - see page 71 Technical Data Conventional thermal current Ith Rated operational current Ie with rated operational voltage Ue - Altemating current 50/60Hz AC - Direct current DC 5A Voltage Ie (A) Resistive Load Inductive Load 125V 5 3 250V 3 2 30V 4 3 125V 0.4 0.4 250V 0.2 0.2 Installation - see page 71 Shunt Release, S-SHT • Can be installed in all frame types • Range of operational voltage: 0.7 - 1.1 x Vn • Frequency (only AC): 45Hz - 65Hz Technical Data Control voltage (V) DC 12V Consumption AC (VA) DC (W) - 0.36 mA Cat. No. 30 S-SHT-12 Power AC/DC 24V 0.58 0.58 24 S-SHT-24 consumption AC/DC 48V 1.22 1.23 25 S-SHT-48 AC/DC 110~130V 1.36 1.37 10.5 S-SHT-120 AC 220~240V/DC250V 1.80 1.88 7.5 S-SHT-230 AC 380~500V 1.15 - 2.3 S-SHT-440 Max. opening time (msec) Tightening torque of terminal screw 50 7.1 lb.in. Installation - see page 71 70 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Accessories Electrical Auxiliaries Undervoltage Release, S-UVT • • • • Can be installed in all frame types Reset-Hold Voltage = 0.85 x Vn Drop-Out Voltage = 0.35 - 0.7 x Vn Frequency (only AC): 45Hz - 65Hz Technical Data Consumption Control voltage (V) Power consumption AC (VA) DC (W) mA Cat. No. AC/DC 24V 0.64 0.65 27 S-UVT-24 AC/DC 48V 1.09 1.10 23 S-UVT-48 AC/DC 110~130V 0.73 0.75 5.8 S-UVT-120 AC 200~240V/DC 250V 1.21 1.35 5.4 S-UVT-230 AC 380~440V 1.67 - 3.8 S-UVT-410 AC 440~480V 1.68 - 3.5 S-UVT-460 Max.opening time (msec) 50 Tightening torque of terminal screw 7.1 lb.in. Transformer operating voltage (V) - Drop (Circuit breaker trips) 0.7~1.35Vn ~0.85Vn Installation - Maximum possibilities Position Left Right AX AX TS250 TS400 TS800 S-AX – 1 3 3 S-AL 1 1 – – S-SHT or S-UVT 1 1 1 1 S-AX 2 1 – – S-AL – – 1 2 TD125 AL TD125 Accessory TS 2 5 0 AX AL SHT/ UVT SHT/ UVT TS 400 TS 8 0 0 AX AX AX AX AL AX AX AX AL AL SHT/ UVT SHT/ UVT Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Altech UL489 - Rise (Circuit breaker can be switched on) 71 Altech UL489 Accessories Handle Kits Extended Rotary Handle Kits* Shaft length: 12”, (16”, 24”, upon request) Frame Type TD125 TS250 TS400 TS800 Dimensions Cat. No. NEMA 1, 3R, 12 S-EHU1-12 S-EHU2-12 S-EHU3-12 S-EHU4-12 Cat. No. NEMA 4X S-EHU1-12/NEMA 4X S-EHU2-12/NEMA 4X S-EHU3-12/NEMA 4X S-EHU4-12/NEMA 4X (see page 75) Flange Handle Kits* Frame Type Cable** Length 36” 48” 60” 72” TD125 TS250 TS400 TS800 Cat. No. NEMA 1, 3R, 12 S-FH1-36 S-FH2-48 S-FH3-60 S-FH4-72 Flange handle (Cable operating handle) For use with only right handed flange type enclosures. * Kits include all necessary hardware to mount to MCCB ** Longer cable available upon request. Locking Devices Mechanical Interlocking Device Fixed Locking Device MCCB TD125 TS250 TS400 TS800 Function OFF or ON position OFF or ON position OFF or ON position OFF or ON position Padlocks are not supplied. Cat. No. Padlockable Device S-PHL1 S-PHL2 S-PHL3 S-PHL4 MCCB TD125 TS250 TS400 TS800 Cat. No. Interlocking Device S-MIT13 S-MIT23 S-MIT33 S-MIT43 Padlocks are not supplied. 0.2~0.3inch (5~8mm) Interlock handle Interlock bar Padlock dimensions 1.2inch (30mm) Removable Locking Device MCCB TD125 TS250 TS400 TS800 Padlocks are not supplied. Function OFF position OFF position OFF position OFF position Cat. No. Padlockable device S-PL1 S-PL2 S-PL3 S-PL4 Cover Aux. 0.2~0.3inch (5~8mm) 1.2inch (30mm) Padlock dimensions 72 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com TD / TS Series Circuit Breakers Dimensions TD125 3.035 (77.1) 2.958 (75.15) 6.456 (164) 0.192 (4.9) 1.496 (38) 2.716 (69) 2.362 (60) 0.81 (20.45) 3.543 (90) 3.389 (86.1) 0.578 (14.7) 3.496 (88.81) 3.625 (92.1) 4.212 (107) TS250 3.385 (86) 2.952 (75) 4.133 (105) 0.629 (16) 3.546 (90.1) 3.661 (93) 4.318 (109.7) Dimensions shown in inches (mm) Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Altech UL489 7.007 (178) 2.362 (60) 3.937 (100) 0.196 (5) 0.964 (24.5) 1.496 (38) 2.716 (69) 73 TS400 4.33 (110) 3.838 (97.5) 6.353 (166) 0.314(8) 11.496 (292) 2.795 (71) 3.11 (79) 4.015 (102) 3.267 (83) 5.511 (140) 1.496 (38) Altech UL489 TD / TS Series Circuit Breakers Dimensions 4.645 (118) 1.082 (27.5) 4.842 (123) 6.181 (157) TS800 5.846 (148.5) 5.511 (140) 8.267 (210) 4.566 (116) 3.149 (80) 7.818 (198.6) 0.433 (11) 1.862 (47.3) 2.125 (54) 3.279 (83.3) 1 (25.4) 16.85 (428) 2.125 (54) 3.543 (90) 4.685 (119) 5.039 (128) 5.314 (135) 7.775 (197.5) Dimensions shown in inches (mm) 74 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Overall Dimensions - Extended Rotary Handles Panel drilling 1.18 (30) Ø TD125 7 17 0. 14.5 (368.3) 1.10 (28) Ø 2.68 (68) 4.21 (107) 0.531 (13.5) ) .5 (4 12 in. Shaft: 14.5(368.3) 24 in. Shaft: 26.5(673.1) 01 2. .5 ) 1) (5 Dimensions : inch (mm) Ø 0. 21 6 (5 0.433 (11) TS250 0. 1.39 (35.3) 17 (4 ) 2.68 (68) Ø 2.0 1( 51 ) 0.433 (11) Ø0 .23 6( 6) Dimensions : inch (mm) 1.38 (35) .5 4.90 (124.4) 12 in. Shaft: 14.54 (369.3) 24 in. Shaft: 26.54 (674.1) 7 0.79 (20) Ø 14.54 (369.3) 15.93 (404.6) 1.39 (35.3) 0. 17 7 1.83 (46.5) (4 .5 ) 1.39 (35.4) Ø Ø 2. 01 (5 1) 0.433 (11) 17.42 (442.5) 0. 2.22 (56.3) 17 7 (4 2.76 (70) .5 ) 2.68 (68) 0.57 (14.5) Ø 10.94 (278) TS800 12 in. Shaft: 15.93 (404.6) 24 in. Shaft: 27.93 (709.4) Ø 2.0 1( 51 ) 0.433 (11) Panel drilling for MCCB Ø 0. 27 6 (7 ) Dimensions : inch (mm) Panel drilling rotary handle Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Altech UL489 Ø0 .27 6 (7 ) Dimensions : inch (mm) 2.68 (68) 7.87 (200) TS400 12 in. Shaft: 15.93 (404.6) 24 in. Shaft: 27.93 (709.4) 75 TD125 - FTU/FMU; 15~125A FTU:Ir=1× In FMU:Ir=0.8~1× In TD125 / TS250 TS400 / TS800 Rated Current Compensation Ratio (%) Altech UL489 TD / TS Series Circuit Breakers Trip Curves 140 130 120 Calibration Temp.104°F 110 100 90 80 70 20 30 40 50 60 70 80 90 100 110 120 In:15A -> Im=400A In:20A -> Im=400A In:30A -> Im=400A In:40A -> Im=400A FTU/FMU:Im=10× In Min. 400A Ambient Temperature (°F) 0.5 0.8 1 2 3 4 5 6 7 8 10 20 30 40 50 70 100 200 X Normal Current In (I/Ir) TS250 - FTU/FMU; 150~250A TS250 - ATU; 160~250A FTU:Ir=1 × In FMU:Ir=0.8~1× In ATU:Ir=0.8~1× In ATU:Im=5~10× In FTU/FMU:Im=10× In pressure tripping t 10ms pressure tripping t 10ms 0.5 76 Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com 300 TD / TS Series Circuit Breakers Trip Curves TS400 - FTU/FMU; 300~400A TS400 - ATU; 300~400A FTU:Ir=1 × In FMU:Ir=0.8~1× In FTU/FMU:Im=10 × In ATU:Ir=0.8~1× In ATU:Im=5~10 × In pressure tripping t 10ms pressure tripping t 10ms TS800 - ATU; 500~800A FTU:Ir=1 × In FMU:Ir=0.8~1× In FTU/FMU:Im=10× In pressure tripping t 10ms ATU:Ir=0.8~1× In ATU:Im=5~10 × In pressure tripping t 10ms Altech Corp.® • 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com Altech UL489 TS800 - FTU/FMU; 500~800A 77