NTE3027 Infrared Emitting Diode High Speed for Remote Control Description: The NTE3027 Infrared Emitting Diode is a high intensity diode using AlGaAs/GaAs technology molded in a blue transparent plastic standard T-1 3/4 (5mm) package. This device is spectrally matched for use with phototransistor, photodiode and infrared receiver modules. Features: D High Radiant Intensity D Peak Wavelength = λP = 940nm D Low Forward Voltage D High Reliability Applications: D Free Air Transmission System D Infrared Remote Control Units with High Power Requirements D Smoke Detector D Infrared Applied Sytem Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V Forward Current, IF Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150mA Peak (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0A Power Dissipation (TA ≤ +25°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210mW Soldering Temperature (Note 2), Tsol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +260°C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55° to +100°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55° to +100°C Lead Temperature (During soldering, 4mm from mold body, 5sec Max.), TL . . . . . . . . . . . . . +260°C Note 1. Pulse Width = 100μs, Duty Cycle = 1% Electrical Characteristics: (TA = +25°C unless otherwis specified) Parameter Symbol Radient Intensity Ie Test Conditions Min Typ Max Unit 50 60 - mW/sr IF=100mA, tp = 50μs, tp/T= 0.01 130 - mW/sr IF = 1A, tp = 100μs, tp/T = 0.01 1400 - mW/sr IF = 50mA Peak Wavelength λp IF = 20mA - 940 - nm Spectral Bandwidth Δλ IF = 20mA - 50 - nm Forward Voltage VF IF = 50mA 1.30 1.35 1.50 V IF=100mA, tp =50μs, tp/T = 0.01 - 1.55 1.85 V IF = 1A, tp = 100 μs, tp/T = 0.01 - 2.6 4.0 V VR = 5V - - 10 μA IF = 20mA - 45 - deg Reverse Current IR 2 Φ 1/2 View Angle of Half Power Flat Denotes Cathode .228 (5.8) Dia 196 (4.98) Dia . .039 (1.0) .343 (8.7) 1.102 (28.0) .019 (0.5) .078 (2.0) Min 00 (2.54) .1 Tolerance ±.010 (.254)