IDT74ALVCH16501 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND BUS-HOLD FEATURES: IDT74ALVCH16501 DESCRIPTION: • 0.5 MICRON CMOS Technology • Typical tSK(o) (Output Skew) < 250ps • ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) • VCC = 3.3V ± 0.3V, Normal Range • VCC = 2.7V to 3.6V, Extended Range • VCC = 2.5V ± 0.2V µ W typ. static) • CMOS power levels (0.4µ • Rail-to-Rail output swing for increased noise margin • Available in SSOP and TSSOP packages This 18-bit universal bus transceiver is built using advanced dual metal CMOS technology. Data flow in each direction is controlled by output-enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/ flip-flop on the low-to-high transition of CLKAB. When OEAB is high, the outputs are active. When OEAB is low, the outputs are in the high-impedance state. Data flow for B to A is similiar to that of A to B but uses OEBA, LEBA, and CLKBA. The output enables are complementary (OEAB is active high and OEBA is active low). The ALVCH16501 has been designed with a ±24mA output driver. This driver is capable of driving a moderate to heavy load while maintaining speed performance. The ALVCH16501 has “bus-hold” which retains the inputs’ last state whenever the input bus goes to a high impedance. This prevents floating inputs and eliminates the need for pull-up/down resistors. DRIVE FEATURES: • High Output Drivers: ±24mA • Suitable for heavy loads APPLICATIONS: • 3.3V high speed systems • 3.3V and lower voltage computing systems FUNCTIONAL BLOCK DIAGRAM OEAB CLKAB LEAB LEBA CLKBA OEBA A1 1 55 2 28 30 27 3 1D 54 B1 C1 CLK 1D C1 CLK TO 17 OTHER CHANNELS The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE JANUARY 2004 1 © 2004 Integrated Device Technology, Inc. DSC-4738/2 IDT74ALVCH16501 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ABSOLUTE MAXIMUM RATINGS(1) PIN CONFIGURATION OEAB 1 56 GND LEAB 2 55 CLKAB A1 3 54 B1 GND 4 53 GND A2 5 52 B2 Symbol Description VTERM(2) Max Unit Terminal Voltage with Respect to GND –0.5 to +4.6 V VTERM(3) Terminal Voltage with Respect to GND –0.5 to VCC+0.5 V TSTG Storage Temperature –65 to +150 °C –50 to +50 mA ±50 mA IOUT DC Output Current IIK Continuous Clamp Current, VI < 0 or VI > VCC IOK Continuous Clamp Current, VO < 0 –50 mA ICC ISS Continuous Current through each VCC or GND ±100 mA A3 6 51 B3 VCC 7 50 VCC A4 8 49 B4 A5 9 48 B5 A6 10 47 B6 GND 11 46 GND A7 12 45 B7 A8 13 44 B8 A9 14 43 B9 A10 15 42 B10 A11 16 41 B11 A12 17 40 B12 Symbol Conditions Typ. Max. Unit CIN Input Capacitance VIN = 0V 5 7 pF COUT Output Capacitance VOUT = 0V 7 9 pF CI/O I/O Port Capacitance VIN = 0V 7 9 pF GND 18 39 GND A13 19 38 B13 A14 20 37 B14 A15 21 36 B15 VCC 22 35 VCC A16 23 34 B16 A17 24 33 B17 GND 25 32 GND A18 26 31 B18 OEBA 27 30 CLKBA LEBA 28 29 GND NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. VCC terminals. 3. All terminals except VCC. CAPACITANCE (TA = +25°C, F = 1.0MHz) Parameter(1) NOTE: 1. As applicable to the device type. PIN DESCRIPTION Pin Names SSOP/ TSSOP TOP VIEW Description OEAB A-to-B Output Enable Input OEBA B-to-A Output Enable Input (Active LOW) LEAB A-to-B Latch Enable Input LEBA B-to-A Latch Enable Input CLKAB A-to-B Clock Input CLKBA B-to-A Clock Input Ax A-to-B Data Inputs or B-to-A 3-State Outputs(1) Bx B-to-A Data Inputs or A-to-B 3-State Outputs(1) NOTE: 1. These pins have "Bus-Hold". All other pins are standard inputs, outputs, or I/Os. 2 IDT74ALVCH16501 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE FUNCTION TABLE(1,2) Inputs Output OEAB LEAB CLKAB Ax Bx L X X X Z H H X L L H H X H H H L ↑ L L H L ↑ H H H L L or H X B(3) NOTES: 1. A-to-B data flow is shown. B-to-A data flow is similar, but uses OEBA, LEBA, and CLKBA. 2. H = HIGH Voltage Level L = LOW Voltage Level X = Don’t Care Z = High-Impedance ↑ = LOW-to-HIGH Transition 3. Output level before the indicated steady-state input conditions were established. DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Operating Condition: TA = –40°C to +85°C Symbol VIH VIL Min. Typ.(1) Max. Unit VCC = 2.3V to 2.7V 1.7 — — V VCC = 2.7V to 3.6V 2 — — VCC = 2.3V to 2.7V — — 0.7 VCC = 2.7V to 3.6V — — 0.8 Parameter Input HIGH Voltage Level Input LOW Voltage Level Test Conditions V IIH Input HIGH Current VCC = 3.6V VI = VCC — — ±5 µA IIL Input LOW Current VCC = 3.6V VI = GND — — ±5 µA IOZH High Impedance Output Current VCC = 3.6V VO = VCC — — ±10 µA IOZL (3-State Output pins) VO = GND — — ±10 VIK Clamp Diode Voltage VCC = 2.3V, IIN = –18mA — –0.7 –1.2 V VH ICCL ICCH ICCZ ∆ICC Input Hysteresis Quiescent Power Supply Current VCC = 3.3V VCC = 3.6V VIN = GND or VCC — — 100 0.1 — 40 mV µA Quiescent Power Supply Current Variation One input at VCC - 0.6V, other inputs at VCC or GND — — 750 µA NOTE: 1. Typical values are at VCC = 3.3V, +25°C ambient. 3 IDT74ALVCH16501 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE BUS-HOLD CHARACTERISTICS Symbol IBHH Parameter(1) Test Conditions Bus-Hold Input Sustain Current VCC = 3V VI = 2V IBHL IBHH Bus-Hold Input Sustain Current VCC = 2.3V IBHL IBHHO Bus-Hold Input Overdrive Current Min. VCC = 3.6V Typ.(2) Max. Unit µA – 75 — — VI = 0.8V 75 — — VI = 1.7V – 45 — — VI = 0.7V 45 — — — ±500 VI = 0 to 3.6V — µA µA IBHLO NOTES: 1. Pins with Bus-Hold are identified in the pin description. 2. Typical values are at VCC = 3.3V, +25°C ambient. OUTPUT DRIVE CHARACTERISTICS Symbol VOH VOL Test Conditions(1) Parameter Output HIGH Voltage Output LOW Voltage Min. Max. Unit V VCC = 2.3V to 3.6V IOH = – 0.1mA VCC – 0.2 — VCC = 2.3V IOH = – 6mA 2 — VCC = 2.3V IOH = – 12mA 1.7 — VCC = 2.7V 2.2 — VCC = 3V 2.4 — VCC = 3V IOH = – 24mA 2 — VCC = 2.3V to 3.6V IOL = 0.1mA — 0.2 VCC = 2.3V IOL = 6mA — 0.4 IOL = 12mA — 0.7 VCC = 2.7V IOL = 12mA — 0.4 VCC = 3V IOL = 24mA — 0.55 V NOTE: 1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range. TA = – 40°C to + 85°C. OPERATING CHARACTERISTICS, TA = 25°C Symbol Parameter CPD Power Dissipation Capacitance Outputs enabled CPD Power Dissipation Capacitance Outputs disabled VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V Test Conditions Typical Typical Unit CL = 0pF, f = 10Mhz 44 54 pF 6 6 4 IDT74ALVCH16501 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE SWITCHING CHARACTERISTICS(1) VCC = 2.5V ± 0.2V Symbol Parameter Min. Propagation Delay tPHL Ax to Bx or Bx to Ax tPLH Propagation Delay tPHL LE to Ax or Bx tPLH Propagation Delay tPHL CLK to Ax or Bx tPZH Output Enable Time tPZL OEBA to Ax tPZH Output Enable Time tPZL OEAB to Bx tPHZ Output Disable Time tPLZ OEBA to Ax tPHZ Output Disable Time tPLZ OEAB to Bx tSU Set-up Time, data before CLK↑ tSU Set-up Time, data before LE↓ Min. 150 — 1 4.8 1.1 VCC = 3.3V ± 0.3V Max. Unit 150 — MHz 1 3.9 ns 5.3 1.3 4.6 ns — 5.6 1.4 4.9 ns 6.3 — 6 1.1 5 ns 1 5.8 — 5.3 1 4.6 ns 1.3 5.3 — 4.6 1.3 4.2 ns 1.5 6.2 — 5.7 1.4 5 ns 2.2 — 2.1 — 1.7 — ns CLK LOW 1.9 — 1.6 — 1.5 — ns CLK HIGH 1.3 — 1.1 — 1 — fMAX tPLH VCC = 2.7V Max. Max. Min. 150 — — 4.5 5.7 — 1.2 6.1 1.3 tH Hold Time, data after CLK↑ 0.6 — 0.6 — 0.7 — ns tH Hold Time, data after LE↓, CLK HIGH or LOW 1.4 — 1.7 — 1.4 — ns tW Pulse Width, LE HIGH 3.3 — 3.3 — 3.3 — ns tW Pulse Width, CLK HIGH or LOW 3.3 — 3.3 — 3.3 — ns Output Skew(2) — — — — — 500 ps tSK(o) NOTES: 1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C. 2 Skew between any two outputs of the same package and switching in the same direction. 5 IDT74ALVCH16501 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS AND WAVEFORMS TEST CONDITIONS VCC(1)= 3.3V±0.3V VCC(1)= 2.7V Symbol VCC(2)= 2.5V±0.2V Unit VLOAD 6 6 2 x Vcc V VIH 2.7 2.7 Vcc V VT 1.5 1.5 Vcc / 2 V VLZ 300 300 150 mV VHZ 300 300 150 mV CL 50 50 30 pF (1, 2) VIN tPHL VIH VT 0V ALVC Link DISABLE ENABLE CONTROL INPUT GND tPZL D.U.T. OUTPUT SWITCH NORMALLY CLOSED LOW tPZH OUTPUT SWITCH NORMALLY OPEN HIGH 500Ω CL ALVC Link Test Circuit for All Outputs tPLH Propagation Delay VOUT RT tPHL OPPOSITE PHASE INPUT TRANSITION Open 500Ω tPLH OUTPUT VLOAD VCC Pulse Generator VIH VT 0V VOH VT VOL SAME PHASE INPUT TRANSITION tPLZ VLOAD/2 VT VIH VT 0V VLOAD/2 VLZ VOL tPHZ VOH VHZ 0V VT 0V ALVC Link DEFINITIONS: CL = Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. Enable and Disable Times NOTE: 1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH. NOTES: 1. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns. 2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2ns; tR ≤ 2ns. DATA INPUT SWITCH POSITION Test GND All Other Tests Open INPUT OUTPUT 1 tPLH1 SYNCHRONOUS CONTROL VIH VT 0V VOH VT VOL tSK (x) OUTPUT 2 LOW-HIGH-LOW PULSE VT tW HIGH-LOW-HIGH PULSE VT ALVC Link tPHL2 Pulse Width tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1 Output Skew - tSK(X) tH Set-up, Hold, and Release Times VOH VT VOL tPLH2 tSU ALVC Link tPHL1 tSK (x) tREM ASYNCHRONOUS CONTROL VLOAD Disable High Enable High tH TIMING INPUT Switch Open Drain Disable Low Enable Low tSU VIH VT 0V VIH VT 0V VIH VT 0V VIH VT 0V ALVC Link NOTES: 1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs. 2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank. 6 IDT74ALVCH16501 3.3V CMOS 18-BIT UNIVERSAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION IDT ALVC X XX Bus-Hold Temp. Range XXX Family XX XXX Device Type Package CORPORATE HEADQUARTERS 2975 Stender Way Santa Clara, CA 95054 PV PA Shrink Small Outline Package Thin Shrink Small Outline Package 501 18-Bit Universal Bus Transceiver with 3-State Outputs 16 Double-Density, ±24mA H Bus-Hold 74 – 40°C to +85°C for SALES: 800-345-7015 or 408-727-6116 fax: 408-492-8674 www.idt.com 7 for Tech Support: [email protected] (408) 654-6459