Custom Networks Vishay Techno Custom Thick Film Networks, Quadpack, Surface Mount FEATURES • • • • • • • Thick film resistive elements NP0 or X7R capacitors for line terminator R, C, D multicomponent network Wide operating temperature range, - 55 °C to + 125 °C TCR tracking = ± 50 ppm/°C Surface mount “J” leads or gull wing leads Custom resistor, capacitor and diode network combinations CAPACITOR SPECIFICATIONS SCHEMATICS Model: NP0 or X7R Size: 0805 to 1210 NP0 Capacitance Range Standard: 1 pF to 0.56 µF, other values available X7R Capacitance Range: 330 pF to 0.027 µF, other values available Custom Resistor Quad R10 R1 R8 R2 R5 R3 R4 Note • NP0 capacitors may be substituted for X7R capacitors R9 Tolerance: NP0 = J ± 5 %, K ± 10 % standard X7R = K ± 10 %, M ± 20 % standard, tighter tolerances available Voltage Rating: 50 VDC, higher voltage available on request R6 R7 MECHANICAL SPECIFICATIONS Lead: “J” lead/gull wing available. Standard Ceramic Size: 0.5" (12.7 mm) x 0.5" (12.7 mm), 0.75" (19.05 mm) x .75" (19.05 mm), 1.0" (25.4 mm) x 1.0" (25.4 mm), 1.25" (31.75 mm) x 1.25" (31.75 mm), 1.5" (38.1 mm) x 1.5" (38.1 mm) Custom Resistor/Capacitor Quad Note • Parts will be covered with polymer, glass or ceramic lid R1 R2 R3 R4 R7 C3 R6 C1 C2 DIMENSIONS in inches (millimeters) R5 RESISTOR SPECIFICATIONS Resistance Range: 10 Ω to 10 MΩ, other values available on request Resistance Tolerance: F = ± 1 %, G = ± 2 %, J = ± 5 % standard, tighter tolerances available Temperature Coefficient: (- 55 °C to + 125 °C) ± 100 ppm/°C standard, ± 50 ppm/°C available Maximum Working Voltage: 50 VDC maximum. Higher voltage available on request Document Number: 68006 Revision: 14-Jan-10 0.050 (1.27) Typ. 0.100 (2.54) Typ. ORDERING INFORMATION • For custom product information contact factory For technical questions, contact: [email protected] www.vishay.com 421 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000