V i s h ay I n t e r t e c h n o l o g y, I n c . THIN FILM CHIP RESISTORS PCAN Series High-Power Aluminum Nitride, Wraparound SurfaceMount, Precision Thin Film Chip Resistor (up to 6 W) Key Benefits • • • • • • • Power rating to 6 W (2 W in 1206, 6 W in 2512) High thermal conductivity aluminum nitride substrate Resistance range 30 Ω to 175 Ω Resistor tolerance to ± 0.1 % TCR to ± 25 ppm/°C Lead bearing, RoHS compliant lead (Pb)-free, and epoxy bondable gold terminations available Flame resistant UL 94 V-0 APPLICATIONS • • • • • Industrial Military Aerospace Medical Telecommunications Resources • Datasheet: PATT - www.vishay.com/doc?60125 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0416-1407 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V i s h ay I n t e r t e c h n o l o g y, I n c . THIN FILM CHIP RESISTORS PCANPCAN Series www.vishay.com Vishay Dale Thin Film Aluminum Nitride, Wraparound SurfaceHighHigh-Power Power Aluminum Nitride, Wraparound Surface Mount, Mount, Precision Thin Film Chip Resistor (up to Precision Thin Film Chip Resistor (up to 6 W) 6 W) FEATURES • • • • • • High thermal conductivity aluminum nitride substrate Power rating up to 6.0 W Resistance range 30 to 175 Resistor tolerance to ± 0.1 % TCR to ± 25 ppm/°C Flame resistant UL 94 V-0 APPLICATIONS • Power supplies PCAN series chip resistors are designed on aluminum nitride ceramic substrates with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users circuit assembly. Actual power handling capability is limited by the end user mounting process. As with any high power chip resistor the ability to remove the heat is critical to the overall performance of the device. • Power switching • Braking system TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Nichrome - Material 30 to 175 - TCR: Absolute 25 ppm/°C (standard) and 100 ppm/°C - Tolerance: Absolute 0.1 %, 0.25 %, 0.5 %, 1.0 % and 5.0 % -55 °C to +150 °C 2.0 W to 6.0 W (1) Maximum at +70 °C Resistance Range Power Rating: Resistor Stability: Absolute R 1.0 % 1000 h at +70 °C Voltage Coefficient < 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 °C to +150 °C - Storage Temperature Range -55 °C to +150 °C - Noise < -30 dB - Shelf Life Stability: Absolute ± 0.01 % 1 year at +25 °C Note (1) Dependant on component mounting by user. COMPONENT RATINGS POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 1206 CASE SIZE 2000 (2) 200 30 to 175 2512 6000 (2) 200 30 to 175 Notes • 0603 and 0805 case size under engineering qualification. (2) Dependant on component mounting by user. PRODUCT SHEET 2/2 VMN-PT0416-1407 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 06-Jun-14 Document Number: 60125 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT