V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM SMD CHIP RESISTOR E /H (QPL Qualified MIL-PRF-55342) Resistors - QPL "R" Level Failure Rate MIL-PRF-55342 Tantalum Nitride QPL Qualified, Precision Thin Film Surface-Mount Chip Resistor KEY BENEFITS • • • • QPL listed for MIL-PRF-55342 established reliability, “R” failure rate level Moisture resistant tantalum nitride resistive film Tolerance to 0.1 %, TCR of 25 ppm/°C Resistance range 49.9 Ω to 3.3 MΩ APPLICATIONS • Military • Aerospace RESOURCES • Datasheet: E/H (QPL Qualified MIL-PRF-55342) - http://www.vishay.com/doc?60120 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0331-1305 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . THIN FILM SMD CHIP RESISTOR E /H (QPL Qualified MIL-PRF-55342) E/H (Ta2N) (Military M/D55342) www.vishay.com Vishay Dale Thin Film MIL-PRF-55342 Tantalum Nitride QPL Qualified, QPL MIL-PRF-55342 Qualified Precision ThinFilm FilmResistor, SurfaceSurface MountMount Chip Resistor Chip Ta N Thin 2 Resistors - QPL "R" Level Failure Rate FEATURES Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental lot testing. CONSTRUCTION Passivation • Established reliability, “R” failure rate level (0.01 % per 1000 h), C = 2 • High purity alumina substrate 99.5% Al2O3 • Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for + 150 °C operating conditions • Very low noise and voltage coefficient (< - 25 dB, 0.5 ppm/V) • Non-inductive • Laser-trimmed tolerances ± 0.1 % • Complete MIL-testing available in-house • Antistatic waffle pack or tape and reel packaging available • Military/aerospace/QPL approval TYPICAL PERFORMANCE Tanatlum Nitride Resistor Film Solder Coating ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tantalum nitride (Ta2N) resistor film 49.9 to 3.3 M ± 25 ppm/°C to ± 300 ppm/°C ± 0.1 % to ± 10 % R ± 0.02 % 0.1 ppm/V 30 V to 200 V - 55 °C to + 125 °C - 55 °C to + 150 °C < - 25 dB R ± 0.01 % CONDITIONS - 55 °C to + 125 °C + 25 °C 2000 h at + 70 °C 1 year at + 25 °C COMPONENT RATINGS Revision 24-Apr-13 CASE SIZE M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 D55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 POWER RATING (mW) 50 125 200 150 225 150 250 800 1000 500 50 100 WORKING VOLTAGE (V) 40 40 75 125 175 50 100 150 200 75 30 50 RESISTANCE RANGE BY TOLERANCE 0.1 %, 0.25 %, 0.5 %, 1 % 2.0 % and 5.0 % 10 % 49.9 to 64.9 K 49.9 to 140 K 49.9 to 357 K 49.9 to 806 K 49.9 to 1.5 M 49.9 to 309 K 49.9 to 1 M 49.9 to 2.0 M 49.9 to 3.01 M 49.9 to 604 K 49.9 to 49.9 K 49.9 to 130 K 51 to 68 K 51 to 150 K 51 to 360 K 51 to 820 K 51 to 1.5 M 51 to 820 K 51 to 1 M 49.9 to 2.0 M 51 to 3 M 51 to 620 K 51 to 51 K 51 to130 K 51 to 68 K 51 to 150 K 51 to 360 K 51 to 820 K 51 to 1.5 M 51 to 820 K 51 to 1 M 51 to 2.23 M 51 to 3.3 M 51 to 680 K 51 to 51 K 51 to 150 K Note • Values listed are a guide, refer to MIL spec for value/tolerance allowance Revision: 24-Apr-13 Document Number: 60120 1 For technical questions, contact: [email protected] DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT PRODUCTTHIS SHEET 2/2 VMN-PT0331-1305 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000