PCNM www.vishay.com Vishay Dale Thin Film High Power Aluminum Nitride, Wraparound Surface Mount, Precision Thin Film Non-Magnetic Chip Resistor (up to 6 W) FEATURES • • • • • • High thermal conductivity aluminum nitride substrate Power rating up to 6.0 W Resistance range 2 to 30.1 k Resistor tolerance to ± 0.1 % TCR to ± 25 ppm/°C Flame resistant UL 94 V-0 APPLICATIONS • Power supplies • Power switching • Braking system PCNM series chip resistors are designed on aluminum nitride ceramic substrates with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users circuit assembly. Actual power handling capability is limited by the end user mounting process. As with any high power chip resistor the ability to remove the heat is critical to the overall performance of the device. TYPICAL PERFORMANCE ABSOLUTE TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Nichrome - 2 to 30.1 k - Material Resistance Range TCR: Absolute 25 ppm/°C (standard) and 100 ppm/°C - Tolerance: Absolute 0.1 %, 0.25 %, 0.5 %, 1.0 % and 5.0 % -55 °C to +150 °C 0.5 W to 6.0 W (1) Maximum at +70 °C Power Rating: Resistor Stability: Absolute R 1.0 % 1000 h at +70 °C Voltage Coefficient < 0.1 ppm/V - Working Voltage 75 V to 200 V - Operating Temperature Range -55 °C to +155 °C - Storage Temperature Range -55 °C to +155 °C - Noise < -30 dB - Shelf Life Stability: Absolute ± 0.01 % 1 year at +25 °C Note (1) Dependant on component mounting by user. COMPONENT RATINGS POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 1206 CASE SIZE 2000 (2) 200 2 to 30.1K 2512 (2) 200 2 to 30.1K 6000 Notes • 0603 and 0805 case size under engineering qualification. (2) Dependant on component mounting by user. Revision: 03-Jun-16 Document Number: 60130 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PCNM www.vishay.com Vishay Dale Thin Film ENVIRONMENTAL TESTS ENVIRONMENTAL TEST LIMITS MIL-PRF-55342 CHARACTERISTIC “H” TYPICAL VISHAY PERFORMANCE ± 50 ppm/°C ± 25 ppm/°C +70 °C +70 °C Resistance temperature characteristic Maximum ambient temperature at rated wattage Maximum ambient temperature at power derating +150 °C +150 °C Thermal shock ± 0.25 % ± 0.10 % Low temperature operation ± 0.25 % ± 0.10 % Short time overload ± 0.1 % ± 0.10 % High temperature exposure ± 0.2 % ± 0.10 % Resistance to soldering heat ± 0.25 % ± 0.10 % Moisture resistance ± 0.4 % ± 0.50 % Life at +70 °C for 1000 h ± 0.5 % ± 1.00 % DIMENSIONS in inches D T D W T E L L LENGTH L WIDTH W THICKNESS T MIN./MAX. TOP PAD D BOTTOM PAD E 1206 0.126 ± 0.008 0.063 ± 0.005 0.015 ± 0.003 0.020 + 0.005 / - 0.010 0.040 ± 0.005 2512 0.259 + 0.009 / - 0.015 0.124 ± 0.005 0.015 ± 0.003 0.020 ± 0.005 0.050 ± 0.005 CASE SIZE LAND PATTERN DIMENSIONS in inches 0805 Land Pattern 2512 Land Pattern 0.1050 0.2910 0.0520 0.1260 0.0200 0.0425 0.1090 0.0910 STANDARD MATERIAL SPECIFICATIONS Resistive element Nichrome Substrate material Aluminum nitride Terminations (tin / lead) Terminations (lead (Pb)-free) Revision: 03-Jun-16 Tin / lead solder over nickel barrier Tin / silver / copper (Sn96.5 / Ag3.0 / Cu0.5) solder over nickel barrier Document Number: 60130 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PCNM www.vishay.com Vishay Dale Thin Film PCAN1206 CHIP TEMP VS. APPLIED POWER PCNM2512 CHIP TEMP VS. APPLIED POWER 12.0 16.0 10 Ω 14.0 1000 Ω 10 Ω 1000 Ω 10 000 Ω 100 Ω 12.0 100 Ω 8.0 Applied Power (W) Applied Power (W) 10.0 6.0 4.0 10.0 8.0 6.0 4.0 2.0 0.0 2.0 70 150 Chip Surface Temperature Temperature (°C) 0.0 200 70 150 Chip Surface Temperature Temperature (°C) 200 Note • Chip surface temperature measured using FLIR SC645 thermal imaging system with an approximate test card surface temperature of 75 °C. Note • Chip surface temperature measured using FLIR SC645 thermal imaging system with an approximate test card surface temperature of 75 °C. DERATING CURVE Percent of Rated Power 100 80 60 40 20 0 0 70 125 155 Ambient Temperature °C Revision: 03-Jun-16 Document Number: 60130 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PCNM www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PCNM1206H1000BBT1 P C N M 1 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PCNM 1206 2512 E = ± 25 ppm/°C H = ± 50 ppm/°C K = ± 100 ppm/°C (1) 2 0 6 H 1 0 0 0 RESISTANCE TOLERANCE TERMINATION The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. “R” designates the decimal point. B = ± 0.1 % (2) C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % (1) G = ± 2.0 % B = Wraparound Sn/Pb solder w/ nickel barrier S = Wraparound lead (Pb)-free solder (e1) RoHS compliant G = Wraparound Au, over Ni (gold) termination epoxy bondable RoHS compliant (e4) Example: 10R0 = 10 1000 = 100 B B T 1 PACKAGING BS = BULK 100 min., 1 mult WS = WAFFLE 100 min., 1 mult W0 = 100 pc min. waffle, 1 mult WI = 100 min., 1 mult (package unit single lot date code) TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) Notes (1) Less than 10 100 ppm/°C and 1 % tolerance best. (2) Available on 10 and higher. Revision: 03-Jun-16 Document Number: 60130 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000