V I S H AY I N T E R T E C H N O L O G Y, I N C . AUTOMOTIVE GRADE Overview of Automotive Grade Products AUTOMOTIVE GRADE PRODUCTS DISCRETE SEMICONDUCTORS • MOSFETs • Optoelectronics PASSIVE COMPONENTS • Capacitors –– Aluminum –– Tantalum –– Ceramic –– Film • Resistors –– Film –– Wirewound –– Power Metal Strip® –– Thick Film Power • Inductors –– IHLP® –– IHTH A WORLD OF SOLUTIONS SELECTOR GUIDE 1/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6226-1505 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AUTOMOTIVE GRADE Overview of Automotive Grade Products Program Description Vishay has incorporated key automotive industry quality initiatives into an Automotive Grade Product line. The goal is zero defects. The requirements cover design, qualification, and manufacturing, and are used to continuously improve Vishay products and processes. Products fulfilling the Vishay Automotive Grade requirements, described below, earn our Automotive Grade stamp on their datasheets. Design • R obust Design Policy: New and modified products are designed using design rules, DFMEA, and lessons learned. The design rules ensure Automotive Grade Products are robust through manufacturing and assembly. Testing to failure confirms that design margins meet the demands of automotive use. • S afe Launch: Vishay’s Safe Launch Policy ensures that everything from design through production roll-out happens according to plan. Process corner evaluation, yield analysis, process capability review, and reliability testing are all incorporated. Qualification • A EC-Q100-, AEC-Q101-, AEC-Q200-Qualified: Automotive Grade Products are qualified to the latest AEC qualification standards and presented for approval using PPAP. Manufacturing • TS16949 Facility: All Automotive Grade Products are produced in facilities certified to TS16949. • M averick Lot Program: The Maverick Lot Program employs Part Average Testing (PAT), Statistical Yield Limit (SYL), and Statistical Bin Limit (SBL) according to AEC-Q001 and AEC-Q002 to identify statistically different parts and lots. • P eriodic Verification to AEC Requirements: Product families are verified to AEC Stress Test Qualification standards every two years. Continuous Improvement • Error Proofing: Error proofing is performed during the entire process to identify and eliminate potential causes of defects. • Lessons Learned/Look Across: All continual improvement actions are linked to lessons learned and look across programs to ensure improvement everywhere in the company. SELECTOR GUIDE 2/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6226-1505 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AUTOMOTIVE GRADE Overview of Automotive Grade Products Automotive Grade Product Table Discrete Semiconductors AEC-Q101 Qualified MOSFETs Optoelectronics SELECTOR GUIDE Description / Families Packages • N-channel and p-channel TrenchFET® power MOSFETs (avalanche-rated cell density process, very low on-resistance, optimized logic-level and standard-level types) PowerPAK® 1212-8, PowerPAK SO-8L, DPAK (TO-252), TO-262, TO-263, TO-220, reverse DPAK, bare die, SO-8, TSOP-6, SOT-23, SC-70, SQ • LED - full color palette including white • Infrared emitters: – 830 nm, 850 nm, 870 nm, 890 nm, and 940 nm • Photodiodes, phototransistors – peak sensitivity matches emitters: 400 nm to 1100 nm, 790 nm to 970 nm • Ambient light sensors: – peak sensitivity of 540 nm • Optical sensors: – reflective sensors, slotted interrupters PLCC-2, PLCC-4, Little Star®, TELUX, 1206, 0805, 0603, 1.8 mm gullwing, reverse gullwing, PLCC-4 multicolor, MiniLED, custom packages 3/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6226-1505 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AUTOMOTIVE GRADE Overview of Automotive Grade Products Automotive Grade Product Table Passive Components AEC-Q200 Qualified Description / Families Packages CAPACITORS • Very high lifetime, high ripple current, low ESR, high temperature up to 150 °C, low impedance Aluminum Electrolytic Tantalum Surface-Mount MLCC Ceramic Leaded MLC Ceramic Singlelayer Film Capacitor - Radial 146 RTI, 140 RTM, 150 RMI, 152 RMH - SMD 160 CLA, 146 CTI, 140 CRH, 150 CRZ TP3 High performance, low ESR Cases A, B, C, D, and E TH3 High temperature: 150 ˚C Cases A, B, C, D, and E TH4 High temperature: 175 ˚C Cases B, C, and D TP8 Small case sizes, maximum capacitance SMD (VJ…31X ROHS Automotive series) SMD (VJ…31 and VJ…34 Automotive series) A...V Series, K...V Series • Axial, radial crimped or straight leads • Tin plated copper-clad steel wire, 0.5 mm • 50 VDC, 100 VDC, 200 VDC • Class 1 and Class 2 ceramic • Lead spacing of 2.5 mm and 5.0 mm AY2 Series X1/Y2 safety capacitor • Radial leaded, straight leads • Tin-plated, copper-clad steel wire, 0.6 mm • Temperature cycle: 1000 cycles (-55 °C to +125 °C) • Safety Class X1, 440 VAC, Y2, 300 VAC (IEC 60384-14.3) • Lead spacing of 5 mm, 7.5 mm and 10.0 mm • MKT DC lacquered radial 5 mm - 27.5 mm : BFC2 365-366-367368-369-467-468-469 10 mm - 27.5 mm: MKT 1820 7.5 mm - 27.5 mm: BFC2 338 6 15 mm - 27.5 mm: F1772-2 310V X2 (<= 470 nF) 27.5 mm - 52.5 mm: MKP 1848 DC-Link • MKT DC potted radial • MKP RFI Y2 potted radial • MKT RFI X2 potted radial • MKP DC-Link potted radial SELECTOR GUIDE Cases: 0603, 0805, low-profile A & B • Matte tin terminations incl. Polymer layer (Soft-/Flex-) option • AgPd terminations for conductive epoxy assembly • C0G (NP0), X7R and X8R • Size 0402 up to 1812 with ranges from 16 V to 3000 V • Excellent ESD performance: 100 V (0805, 10 nF) up to 22 kV ESD, 200 V (0805, 10 nF) up to 25 kV ESD 4/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6226-1505 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AUTOMOTIVE GRADE Overview of Automotive Grade Products Automotive Grade Product Table Passive Components AEC-Q200 Qualified Description / Families Packages INDUCTORS 1616 to 6767 (-A1 and -1A suffix) Frequency range up to 5 MHz IHLP • Low profile, high current, surface-mount • Shielded construction • Handles high transient current spikes without hard saturation • Ultra-low buzz noise due to composite construction 0750 and 1125 IHTH • High current, through-hole • High operating temperature range from -55 to +155 ˚C • Shielded construction • Handles high transient current spikes without hard saturation • Ultra-low buzz noise due to composite construction • MELF (SMM, MMA, MMB, MMU), • Carbon film MELF (2.2 Ω to 200 kΩ) • Thin film (TNPW e3-size 0402-1210, TNPU e3, MC AT, ACAS AT all sizes) • WSF (10 Ω to 100 kΩ) Most SMD packages available • WSC, WSN, WSZ • SR (1 W to 5 W radial leads) 2515 to 7532 packaging (inch) • WSH • WSK • WSL 2818 0612, 2512 0603, 0805, 1020, 1206, 2010, 2512, 2816, 3921, 5931, 2726, 4026, 3637 • WSL high power • WSLP WSLxxxx…18’s 0603, 0805, 1206, 2010, 2512, 3921, 5931, 2726, 4026 • • • • 2512 2010…18, 2512, 3921, 5931, 2726, 4026 2908 4527 (2, 3 and 5 [high power]) 1616 to 8787 (-5A suffix) High operating temperature, up to +155 ˚C RESISTORS* Film Wirewound Power Metal Strip® Thick Film Power WSLS WSLT WSMS WSR D2TO020 and D2TO035 : • SMD power resistor 20 W and 35 W at 25 °C • Wide resistive range from .01 Ω to 550 kΩ • Non-inductive LTO100: • Power resistor 100 W at 25 °C • Wide resistive range from 0.15 Ω to 1 MΩ • Non-inductive D2PAK / TO-263 TO-247 *Flame Retardance testing might not be applicable to all resistor technologies. Contact Vishay Sales or Product Marketing for additional information. SELECTOR GUIDE 5/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6226-1505 www.vishay.com