RS3A THRU RS3M N1813 REV.-

RS3A
THRU
RS3M
Green Products
Technical Data
Data Sheet N1813, Rev. -
RS3A THRU RS3M
SURFACE MOUNT FAST RECOVERY RECTIFIER
Features
•
•
•
•
Glass Passivated chip junction
Built-in strain relief
Fast switching speed for high efficiency
High temperature soldering guaranteed: 250℃/10 second at terminals
Mechanical Data
•
•
•
•
Case: Transfer molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: Solder plated, solderable per MIL-STD-202E method208C
Polarity: Color band denotes cathode end
Mechanical Dimensions (In Inches/mm)
SMC
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
RS3A
THRU
RS3M
Green Products
Technical Data
Data Sheet N1813, Rev. -
Marking Diagram:
Where XXXXX is YYWWL
RS3A
YY
WW
L
= Part Name
= Year
= Week
= Lot Number
Cautions:Molding resin
Epoxy resin UL:94V-0
Ordering Information:
Device
RS3ATHRU RS3M
Package
Shipping
SMC
3000pcs / reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification.
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
RS3A
THRU
RS3M
Green Products
Technical Data
Data Sheet N1813, Rev. -
Absolute Maximum Ratings and Electrical characteristics
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or
inductive load, for capacitive load, derate by 20 %
Characteristic
Symbol RS3A RS3B RS3D RS3G RS3J
RS3K
RS3M
Unit
Peak Repetitive Reverse Voltage
DC Blocking Voltage
VRRM
VDC
50
100
200
400
600
800
1000
V
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
V
Maximum Average Forward Rectified Current
@TL = 100°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IF(AV)
3.0
A
IFSM
100
A
Max Instantaneous Forward Voltage at 3 A
VF
1.3
V
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C
IRM
10
250
µA
Maximum Reverse Recovery Time(Note 1)
Trr
Typical Junction Capacitance(Note 2)
CJ
60
pF
Typical Thermal Resistance Junction
to Ambient (Note 3)
RθJA
RθJL
50
15
°C/W
TJ, TSTG
-55 to +150
°C
Operating and Storage Temperature Range
150
250
500
Note: 1. Measured with IF = 0.5 A, IR = 1 A, Irr = 0.25 A
2. Measured at 1MHz and applied reverse voltage of 4V D.C
3. Thermal resistance from Junction to ambient and from junction to lead mounted on
PCB with 0.3×0.3” (8.0 × 8.0mm) copper pad areas
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
ns
RS3A
THRU
RS3M
Technical Data
Data Sheet N1813, Rev. -
Green Products
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
RS3A
THRU
RS3M
Technical Data
Data Sheet N1813, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •