0402CS

Document 198-1
Chip Inductors – 0402CS (1005)
Continuing in our long tradition of innovation and leadership, Coilcraft introduced the industry’s first 0402
wirewound inductor.
This series shares all of the characteristics of Coilcraft’s
other ceramic inductors: exceptionally high Q factors,
especially at use frequencies; outstanding self-resonant
frequency; tight inductance tolerance; and excellent
batch-to-batch consistency.
D
F
A
E
terminal
Pick and
place
material
H
I
G
J
F
I
Terminal wraparound:
approx 0.007/0,18 both ends
Recommended
Land Pattern
ABCD
maxmaxmax ref E F G H IJ
0.0470.0250.0260.0100.0200.0090.0220.0260.0140.018inches
1,190,640,660,250,510,230,560,660,360,46
mm
Typical L vs Frequency
60
56 nH
50
Inductance (nH)
C
B
overall
40
30
27 nH
20
19 nH
12 nH
10
5.6 nH
1 nH
0
1
10
100
1000
10000
Frequency (MHz)
Typical Q vs Frequency
Core material Ceramic
Environmental RoHS compliant, halogen free optional
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 0.8 – 1.0 mg
Ambient temperature –40°C to +125°C with Irms current.
Maximum part temperature +140°C (ambient + temp rise).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 or 5000 per 7″ reel Paper tape: 8 mm wide,
1.68 mm thick, 2 mm pocket spacing
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
120
110
12 nH
5.6 nH
19 nH
27 nH
100
90
Q Factor
80
70
56 nH
60
50
1 nH
40
30
20
10
0
1
10
100
1000
10000
Frequency (MHz)
Document 198-1 Revised 05/03/13
Document 198-2
Designer’s Kits C328A and B contain 20 each of all 5% values
Designer’s Kits C328A-2 and B-2 contain 20 each of all 2% values
0402CS Series (1005)
Inductance2Percent
tolerance3
Part number1(nH)
900 MHz
L typ Q typ4
SRF min5 DCR max6 Irms7
1.7 GHz L typ Q typ4 (GHz) (Ohms)(mA)
0402CS-1N0XJL_1.05
1.0277
1.02 69 12.70 0.0451360
0402CS-1N2XJL_1.25
1.1728
1.17 38 12.90 0.090 740
0402CS-1N8X_L_1.85,3,2
1.7854
1.78 75 12.00 0.0701040
0402CS-1N9X_L_1.95,3,2
1.7268
1.74 82 11.30 0.0701040
0402CS-2N0X_L_2.05,3,2
1.9354
1.93 75 11.10 0.0701040
0402CS-2N2X_L_2.25,3,2
2.1959
2.23100 10.80 0.070 960
0402CS-2N4X_L_2.45,3,2
2.2451
2.27 68 10.50 0.068 790
0402CS-2N7X_L_2.75,3,2
2.5842
2.60 61 10.40 0.120 640
0402CS-3N3X_L_3.35,3,23.10
653.12
877.00
0.066
840
0402CS-3N6X_L_3.65,3,23.56
453.62
716.80
0.066
840
0402CS-3N9X_L_3.95,3,23.89
504.00
756.00
0.066
840
0402CS-4N3X_L_4.35,3,24.19
474.30
716.00
0.091
700
0402CS-4N7X_L_4.75,3,24.55
484.68
684.77
0.130
640
0402CS-5N1X_L_5.15,3,25.15
565.25
824.80
0.083
800
0402CS-5N6X_L_5.65,3,25.16
545.28
814.80
0.083
760
0402CS-6N2X_L_6.25,3,26.16
526.37
764.80
0.083
760
0402CS-6N8X_L_6.85,3,26.56
636.93
784.80
0.083
680
0402CS-7N5X_L_7.55,3,27.91
608.22
884.80
0.10
680
0402CS-8N2X_L_8.25,3,28.50
578.85
844.40
0.10
680
0402CS-8N7X_L_8.75,3,28.78
549.21
734.10
0.20
480
0402CS-9N0X_L_9.05,3,29.07
629.53
784.16
0.10
680
0402CS-9N5X_L_9.55,3,29.42
549.98
694.00
0.20
480
0402CS-10NX_L_10 5,3,2 9.850 10.1067 3.90 0.20 480
0402CS-11NX_L_11 5,3,2 10.752 11.2078 3.68 0.12 640
0402CS-12NX_L_12 5,3,2 11.953 12.7071 3.60 0.12 640
0402CS-13NX_L_13 5,3,2 13.451 14.6357 3.45 0.21 440
0402CS-15NX_L_15 5,3,2 14.655 15.5077 3.28 0.17 560
0402CS-16NX_L_16 5,3,2 16.646 18.8647 3.10 0.22 560
0402CS-18NX_L_18 5,3,2 18.357 20.2862 3.10 0.23 420
0402CS-19NX_L_19 5,3,2 19.150 21.1067 3.04 0.20 480
0402CS-20NX_L_20 5,3,2 20.752 23.6653 3.00 0.25 420
0402CS-22NX_L_22 5,3,2 23.253 26.7553 2.80 0.30 400
0402CS-23NX_L_23 5,3,2 23.849 26.9064 2.72 0.30 400
0402CS-24NX_L_24 5,3,2 25.151 29.5050 2.70 0.30 400
0402CS-27NX_L_27 5,3,2 28.749 33.5063 2.48 0.30 400
0402CS-30NX_L_30 5,3,2 31.146 38.5039 2.35 0.30 400
0402CS-33NX_L_33 5,3,2 34.931 41.7432 2.35 0.30 400
0402CS-36NX_L_36 5,3,2 39.544 48.4053 2.32 0.44 320
0402CS-39NX_L_39 5,3,2 41.747 50.2345 2.10 0.55 200
0402CS-40NX_L_40 5,3,2 39.044 47.4033 2.24 0.44 320
0402CS-43NX_L_43 5,3,2 45.846 61.5534 2.03 0.81 100
0402CS-47NX_L_47 5,3,2
50.0
38– –2.10
0.83
150
0402CS-51NX_L_51 5,3,2
56.6
40– –1.75
0.82
100
0402CS-56NX_L_56 5,3,2
62.8
42– –1.76
0.97
100
0402CS-68NX_L_68 5,3,2
78.2
36– –1.62
1.12
100
0402CS-82NX_L_82 5,3,2– –– –1.26
1.5550
0402CS-R10X_L_100
5,3,2– –– –1.16
2.0030
0402CS-R12X_L_120
5,3,2– –– –1.10
2.2050
1. When ordering, specify tolerance, termination and packaging codes:
0402CS-68NXJLW
Tolerance: G=2% H = 3% J = 5%
(Table shows stock tolerances in bold.)
Termination:L =RoHS compliant silver-palladium-platinum-glass frit.
E =Halogen free component. RoHS compliant silverpalladium- platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:W
=7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q
=7″ machine-ready reel. EIA-481 punched paper
tape (5000 parts per full reel).
U=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture
and Coilcraft-provided correlation pieces with an Agilent/HP 4286
impedance analyzer.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. For SRF >6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD‑D test fixture. For SRF ≤6 GHz, measured
using an Agilent/HP 8753D network analyzer and a Coilcraft SMD‑D
test fixture.
6. DCR measured on a micro-ohmmeter.
7.Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 198-2 Revised 05/03/13