0603CT

Document 485-1
Chip Inductors – 0603CT (1608)
• Very low profile – only 60% of the height of our other 0603
inductor series
• Excellent Q, low DCR and very high SRF
Designer’s Kit C423 contains 10 each of all stocked 5%
values and Designer’s Kit C423-2 contains 10 each of
all 2% values.
Inductance2Percent
900 MHz
1.7 GHz 1
3
4
Part number (nH)
tolerance L typ
Q typ L typ Q typ4
0603CT-1N0XJL_1.0
0603CT-1N2XJL_1.2
0603CT-2N0XJL_2.0
0603CT-2N2XJL_2.2
0603CT-2N3XJL_2.3
0603CT-2N5XJL_2.5
0603CT-3N0X_L_3.0
0603CT-3N3X_L_3.3
0603CT-3N6X_L_3.6
0603CT-3N9X_L_3.9
0603CT-4N3X_L_4.3
0603CT-4N7X_L_4.7
0603CT-5N1X_L_5.1
0603CT-5N6X_L_5.6
0603CT-6N8X_L_6.8
0603CT-7N2X_L_7.2
0603CT-8N2X_L_8.2
0603CT-9N5X_L_9.5
0603CT-10NX_L_10
0603CT-11NX_L_11
0603CT-12NX_L_12
0603CT-15NX_L_15
0603CT-16NX_L_16
0603CT-18NX_L_18
0603CT-20NX_L_20
0603CT-22NX_L_22
0603CT-24NX_L_24
0603CT-27NX_L_27
0603CT-30NX_L_30
0603CT-33NX_L_33
0603CT-36NX_L_36
0603CT-39NX_L_39
0603CT-43NX_L_43
0603CT-47NX_L_47
0603CT-51NX_L_51
0603CT-56NX_L_56
5
5
5
5
5
5
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
0.98
1.18
1.98
2.10
2.27
2.48
2.96
3.27
3.58
3.87
4.26
4.66
5.12
5.60
6.78
7.19
8.18
9.52
10.0
11.0
12.0
15.2
16.3
18.1
20.2
22.4
24.4
27.4
30.5
34.0
37.2
40.3
44.5
48.2
53.0
59.4
1. When ordering, specify tolerance, termination and packaging codes:
0603CT-56NXGLW
Tolerance: G=2% J = 5% (Table shows stock tolerances in bold.)
Termination:L=RoHS compliant silver-palladium-platinum-glass frit.
E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:W
=7″ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter W instead.
39
35
46
50
55
52
57
60
69
68
58
50
68
67
60
65
60
63
67
66
68
65
63
66
67
60
61
62
62
55
61
60
57
55
55
54
0.99
1.19
1.98
2.13
2.28
2.50
2.97
3.33
3.63
3.95
4.34
4.75
5.18
5.73
7.00
7.44
8.46
9.92
10.4
11.5
12.7
16.1
17.5
19.2
21.6
24.3
26.5
29.8
33.9
39.1
42.3
45.3
51.3
57.8
63.2
75.4
58
50
70
74
81
77
82
83
95
90
84
70
93
90
81
88
78
80
85
86
85
80
76
80
80
70
72
75
73
61
63
65
60
57
55
48
SRFDCR
max6
Irms7
(GHz)(Ohms) (mA)
typ5
16.0 0.0451600
16.0 0.1051100
12.0 0.0341900
10.7 0.0461600
11.0 0.0461600
11.0 0.0601300
10.7 0.0391600
7.00 0.0391600
7.00 0.0441600
6.30 0.0501400
6.30 0.0761300
5.600.120 960
5.50 0.0501400
5.05 0.0581300
4.50 0.0801200
4.50 0.0471500
4.25 0.0751300
3.95 0.0921100
3.95 0.0751300
4.00 0.1101000
3.500.130 920
3.300.145 800
3.100.175 760
2.950.200 720
2.900.175 760
2.750.220 700
2.700.240 680
2.550.270 670
2.450.330 600
2.200.330 600
2.300.335 600
2.250.400 570
2.100.440 530
1.900.540 470
1.850.570 440
1.750.700 420
2. Inductance measured at 250 MHz, 0.1 Vrms, 0 Adc using Coilcraft SMDA fixture in Agilent/HP 4287A impedance analyzer.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using Agilent/HP4291A with Agilent/HP 16193 test fixture.
5. SRF measured using Agilent/HP 8722ES network analyzer and Coilcraft
SMD­‑D test fixture.
6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 485-1 Revised 10/12/15
Document 485-2
0603CT Series (1608)
Typical L vs Frequency
Typical Q vs Frequency
100
100
90
90
10 nH
80
18 nH
27 nH
56 nH
70
70
60
60
50
Q Factor
Inductance (nH)
80
39 nH
40
30
20
18 nH
20
10
10 nH
5.6 nH
10
10
100
1000
10000
56 nH
40
27 nH
1
39 nH
50
30
0
5.6 nH
0
1
10
Frequency (MHz)
B
overall
H
C
Pick and
place
material
D
D
A max B max
1000
10000
Designer’s Kit C423 contains 10 each of all 5% values;
Designer’s Kit C423-2 contains 10 each of all 2% values
Core material Ceramic
G
A
E
terminal
100
Frequency (MHz)
Environmental RoHS compliant, halogen free optional
F
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
G
Weight 160 – 190 mg
Ambient temperature –40°C to +125°C with Irms current
Terminal wraparound:
approx 0.006/0,15 both ends
C max
D
E
F
Recommended
Land Pattern
G
H
Maximum part temperature +140°C (ambient + temp rise).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
0.0640.033 0.0240.0130.0300.0250.0250.040
inches
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
1,630,84 0,610,330,760,640,641,02
mm
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000/7″reel; Paper tape: 8 mm wide, 0.68 mm thick,
4 mm pocket spacing
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Document 485-2 Revised 10/12/15