0402HP

Document 526 -1
Chip Inductors - 0402HP Series (1005)
•Higher Q and lower DCR than other 0402 inductors
•Very high SRF values – as high as 16 GHz
•Excellent current handling capability – up to 2300 mA
•54 inductance values from 1.0 to 220 nH
F
A
E
terminal
H
Pick and
place
material
D
I
G
J
F
I
Terminal wraparound:
approx 0.007/0,18 both ends
Recommended
Land Pattern
0402HP
A max
0.043
1,09
B (min – max)
0.020 – 0.028
0,51 – 0,71
C max
0.024
0,61
0402HPH
A max
0.044
1,12
B
0.026 ±0.002
0,66 ±0,051
C max
0.026
0,66
Typical L vs Frequency
inches
mm
80
inches
mm
D
E
FGH IJ
0.0100.020 0.0080.0240.026 0.014 0.020inches
0,250,51 0,200,610,66 0,36 0,51mm
Note: Height dimension (C) is before optional solder application. For maximum
height dimension including solder, add 0.006 in / 0,152 mm.
Q Factor
Typical Q vs Frequency
120
110
100
90
80
70
60
50
40
30
20
10
0
68 nH
70
Inductance (nH)
C
B
overall
Core material Ceramic
Environmental RoHS compliant, halogen free optional
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 0.7 – 1.0 mg
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 or 5000 per 7″ reel. Paper tape: 8 mm wide,
0.66 mm thick, 2 mm pocket spacing
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
51 nH
60
50
39 nH
40
30
27 nH
20
11 nH
10
2.0 nH
11 nH
0
2.0 nH
1
10
100
1000
10000
Frequency (MHz)
27 nH
39 nH
51 nH
68 nH
1
10
100
1000
10000
Frequency (MHz)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 526-1 Revised 06/18/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 526-2
0402HP Series (1005)
Designer’s Kits C403A and B contain 20 each of 5% values
Designer’s Kits C403A-2 and B-2 contain 20 each of 2% values
900 MHz 1.7 GHz Inductance2 Percent
Test freq SRF typ5 DCR max6 Irms7
Part number1(nH)
tolerance3
(MHz)
L typ Q typ4
L typ Q typ4 (GHz) (Ohms)(mA)
0402HP-1N0XJL_1.0 5
250 0.97 46
0.9972 16.0 0.0302300
0402HP-2N0XJL_2.0 5
250 1.96 58
1.9885 15.2 0.0382100
0402HP-2N2XJL_2.2 5
250 2.17 60
2.1786 15.1 0.0382100
0402HP-2N4X_L_2.4 5,3,2 250 2.37 60
2.3883 14.0 0.0422000
0402HP-2N7X_L_2.7 5,3,2 250 2.66 62
2.6885 13.0 0.0851500
0402HP-3N3X_L_3.3 5,3,2 250 3.26 66
3.2895 12.8 0.0451700
0402HP-3N6X_L_3.6 5,3,2 250 3.56 65
3.5894 11.7 0.0451700
0402HP-3N9X_L_3.9 5,3,2 250 3.87 64
3.9198
9.50 0.0451700
0402HP-4N3X_L_4.3 5,3,2 250 4.26 63
4.3390
7.15 0.0501600
0402HP-4N7X_L_4.7 5,3,2 250 4.67 58
4.7483
6.85 0.0751500
0402HP-5N1X_L_5.1 5,3,2 250 5.07 54
5.1676
6.80 0.1251200
0402HP-5N6X_L_5.6 5,3,2
250
5.56 73
5.66105
6.50 0.055 1600
0402HP-6N2X_L_6.2 5,3,2
250
6.18 73
6.25100
5.80 0.055 1600
0402HP-6N8X_L_6.8 5,3,2 250 6.78 68
6.9794
5.80 0.0701500
0402HP-7N5X_L_7.5 5,3,2 250 7.49 60
7.7782
5.40 0.1001400
0402HP-8N2X_L_8.2 5,3,2 250 8.10 68
8.4095
5.40 0.0651500
0402HP-8N7X_L_8.7 5,3,2 250 8.73 66
9.0495
5.00 0.0701500
0402HP-9N0X_L_9.0 5,3,2 250 8.99 67
9.2192
5.00 0.0801400
0402HP-9N5X_L_9.5 5,3,2 250 9.52 64
9.9790
4.70 0.0901400
0402HP-10NX_L_10
5,3,2 250 9.9862 10.490 4.700.110
1300
0402HP-11NX_L_11
5,3,2 250 11.0 68 11.698 4.700.065
1400
0402HP-12NX_L_12
5,3,2 250 12.0 66 12.6100
4.40 0.1001200
0402HP-13NX_L_13
5,3,2 250 13.1 62 13.982 4.200.155870
0402HP-15NX_L_15
5,3,2 250 15.1 62 16.085 3.900.115
1100
0402HP-16NX_L_16
5,3,2 250 16.2 57 17.377 3.700.150850
0402HP-17NX_L_17
5,3,2 250 17.2 51 18.764 3.700.230650
0402HP-18NX_L_18
5,3,2 250 18.2 58 19.574 3.550.120900
0402HP-19NX_L_19
5,3,2 250 19.2 61 20.788 3.500.145850
0402HP-20NX_L_20
5,3,2 250 20.3 58 22.076 3.500.185780
0402HP-21NX_L_21
5,3,2 250 21.3 48 23.262 1.700.460450
0402HP-22NX_L_22
5,3,2 250 22.3 60 24.474 3.300.160800
0402HP-23NX_L_23
5,3,2 250 23.3 60 25.577 3.300.160800
0402HP-24NX_L_24
5,3,2 250 24.5 55 27.171 3.150.210700
0402HP-25NX_L_25
5,3,2 250 25.5 57 28.373 3.150.260700
0402HP-26NX_L_26
5,3,2 250 26.6 56 29.374 3.150.290700
0402HP-27NX_L_27
5,3,2 250 27.3 62 29.586 3.200.350450
0402HP-30NX_L_30
5,3,2 250 30.8 61 35.087 2.900.350450
0402HP-33NX_L_33
5,3,2 250 34.0 61 38.380 2.800.330490
0402HP-36NX_L_36
5,3,2 250 37.1 59 42.276 2.800.390480
0402HP-37NX_L_37
5,3,2 250 38.2 57 44.072 2.700.480470
0402HP-39NX_L_39
5,3,2 250 40.5 56 47.084 2.600.430450
0402HP-40NX_L_40
5,3,2 250 41.3 56 47.475 2.600.430450
0402HP-43NX_L_43
5,3,2 250 45.0 52 54.168 2.500.520450
0402HP-47NX_L_47
5,3,2 250 49.0 48 58.962 2.400.580420
0402HP-51NX_L_51
5,3,2 250 49.1 52 58.859 2.300.700360
0402HPH-56NX_L_56
5,3,2 250 58.8 56 72.264 2.070.900330
0402HPH-68NX_L_68
5,3,2 250 72.2 56 91.464 1.841.00 320
0402HPH-82NX_L_82
5,3,2
250
89.7
52––1.75
1.10
315
0402HPH-R10X_L_100
5,3,2
250
– –––1.58
1.20
310
0402HPH-R12X_L_120
5,3,2
250
– –––1.25
1.20
310
0402HPH-R15X_L_150
5,3,2
100
– –––1.14
2.0240
0402HPH-R16X_L_160
5,3,2
100
– –––1.65
2.0240
0402HPH-R18X_L_180
5,3,2
100
– –––1.08
2.1240
0402HPH-R22X_L_220
5,3,2
100
– –––0.96
3.1160
1. When ordering, specify tolerance, termination and packaging codes:
0402HP-82NXJLW
Tolerance: G=2% H = 3% J = 5%
(Table shows stock tolerances in bold.)
Termination:L=RoHS compliant silver-palladium-platinum-glass frit.
E=Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging:W
=7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q
=7″ machine-ready reel. EIA-481 punched paper
tape (5000 parts per full reel).
U=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at test frequency using a Coilcraft SMD-F fixture
in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4287A with an Agilent/HP 16197 test
fixture.
5. SRF measured using an Agilent/HP 8722ES network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test
fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maximum ratings.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 526-2 Revised 06/18/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.