XAL1513

Document 1027-1
Shielded Power Inductor XAL1513-153
• High current; very low DCR
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
• Soft saturation makes them ideal for VRM/VRD applications.
Core material Composite
Core and winding loss Go to online calculator
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 18.7 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 100/13″ reel Plastic tape: 32 mm wide, 0.35 mm thick,
24 mm pocket spacing, 13.26 mm pocket depth.
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2 DCR (mOhms)3
Part number1
±20% (µH)
typ max
XAL1513-153ME_ 15
6.87.5
1. When ordering, please specify packaging code:
XAL1513-153MED
Packaging:D=13″ machine-ready reel. EIA-481 embossed plastic
tape (100 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from
its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms (A)6
SRF typ4 Isat5
(MHz)
(A)
20°C rise 40°C rise
8.0
25.5
1622
Irms Testing
Irms testing was performed on 0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly dependent on many factors including
pcb land pattern, trace size, and proximity to other components.
Therefore temperature rise should be verified in application
conditions.
Document 1027-1 Revised 12/08/15
Document 1027-2
Shielded Power Inductor – XAL1513-153
0.598 ±0.008
15,2 ±0,2
20
16
XXX
Inductance (µH)
L vs Current
15 µH
12
8
0.638 ±0.008
16,2 ±0,2
4
0
0
5
10
15
20
25
Current (A)
30
35
Indicates orientation
of terminations
Dash number
L vs Frequency
0.512
max
13,0
100
Inductance (µH)
0.118 ±0.004
3,00 ±0,10
0.299 ±0.010
7,6 ±0,254
0.0197
0,50
0.492
typ
12,5
0.417
10,6
15 µH
10
0.520
13,2
0.125
3,18
1
0.1
1
10
100
Recommended
Land Pattern
Dimensions are in inches
mm
Frequency (MHz)
Document 1027-2 Revised 12/08/15