XFL6012

Document 980-1
Shielded Power Inductors – XFL6012
• High current, very low DCR, soft saturation
• Very low profile – 1.2 mm maximum
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other terminations
available at additional cost.
Weight 0.20 – 0.22 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 26,315,789 hours
Packaging 750/7″ reel; 3000/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 1.4 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2
Part number1
±20% (µH)
XFL6012-181ME_ 0.18
XFL6012-391ME_ 0.39
XFL6012-601ME_ 0.60
XFL6012-801ME_ 0.80
XFL6012-102ME_ 1.0
DCR
(mOhms)3
typ max
7.068.12
10.512.1
13.515.5
18.020.7
21.925.2
Irms (A)6
Isat (A)5
SRF typ4
(MHz)
10% drop 20% drop 30% drop
20°C rise 40°C rise
130
10.1 13.7 14.3
10.1 13.2
83
6.7
9.9 11.2
8.9 12.5
65
5.7
8.9 10.4
8.3 11.2
58
4.2
7.6
9.3
6.7 9.4
52
3.5
6.3
8.0
6.0 8.0
1. When ordering, please specify termination and packaging codes:
XFL6012-801MEC
Termination:E=RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel).
B=Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(3000 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other components. Therefore temperature
rise should be verified in application conditions.
Document 980-1 Revised 07/08/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 980-2
Shielded Power Inductors – XFL6012
Inductance (µH)
Inductance (µH)
L vs Frequency
10
0.30
0.25
0.20
0.18 µH
0.10
0.05
0
0
1
2
3
4
5
6
7
8
9
Current (A)
10
11
13 14
12
0.6
0.5
Inductance (µH)
0.15
1.0 µH
0.80 µH
0.60 µH
1
0.39 µH
0.4
0.39 µH
0.18 µH
0.3
0.2
0.1
0
0.1
0
1
2
3
4
5
6
7
Current (A)
8
9
10
11
100
Frequency (MHz)
0.250 ±0.008
6,36 ±0,2
0.8
0.60 µH
0.6
0.4
0.2
0
1
2
4
3
6
5
Current (A)
7
9
8
10
Indicates orientation
of terminations
Dash
number
0.8
0.258 ±0.008
6,56 ±0,2
11
1.2
1.0
0.047
max
1,2
0.80 µH
0.051 ±0.002
1,30 ±0,05
0.110 ±0.01
2,79 ±0,25
0.6
0.4
0.2
0
10
1
12 13
1.0
0
0.1
XXX
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
0
1
2
3
4
5
6
Current (A)
7
8
9
10
0.0024
0,060
0.197
typ
5,0
0.159
4,04
1.6
0.216
5,50
1.2
1.0 µH
0.8
0.056
1,43
0.4
0
0
1
2
3
4
5
6
Current (A)
7
8
9
10
Recommended
Land Pattern
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Dimensions are in inches
mm
Document 980-2 Revised 07/08/15
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.