XAL1060

Document 812-1
RE
U
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL1060
• Excellent current handling – up to 120 A
• Very low DCR – as low as 0.5 mOhm
• Soft saturation
Designer’s Kit C435 contains 3 of each XAL1060 and XAL1010 value
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper.
Other terminations available at additional cost.
Weight 3.6 – 3.8 g
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 150/7″ reel; 600/13″ reel Plastic tape: 24 mm wide,
0.3 mm thick, 16 mm pocket spacing, 6.3 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR (mOhms)3 SRF typ4 Irms (A)6
Inductance2 Isat5
Part number1
±20% (µH)
typ max
(MHz)
(A)
20°C rise 40°C rise
XAL1060-181ME_0.18 0.500.55 68 120 28.8 46.0
XAL1060-401ME_0.40 0.800.88 60
82 25.9 36.8
XAL1060-681ME_0.68 1.351.50 51
52 22.4 33.9
XAL1060-122ME_1.2
2.502.75 44
43 17.9 26.3
XAL1060-152ME_1.5
3.003.30 36
36 16.0 24.4
XAL1060-222ME_2.2
4.504.95 25
32 13.9 20.0
XAL1060-332ME_3.3
7.207.92 19
26 11.2 16.8
XAL1060-472ME_ 4.7
9.7510.72 16
25
8.5 14.0
1. When ordering, please specify termination and packaging coded:
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other
components. Therefore temperature rise should be verified in
application conditions.
XAL1060-152MEC
Termination:E=RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:C
=7″ machine-ready reel. EIA-481 embossed plastic tape (150 parts per full reel).
B=Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use code letter C instead.
D
=13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(600 parts per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 812-1 Revised 06/30/15
Document 812-2
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL1060
Inductance (µH)
0.30
0.25
0.20
0.18 µH
0.15
0.10
0.05
0
0
10
20
30
40
50
60
70
80
Current (A)
90 100 110 120 130
Inductance (µH)
0.6
0.5
0.4
0.40 µH
0.3
0.2
0.1
0
0
10
20
30
40
50
60
Current (A)
70
80
90 100
Inductance (µH)
1.0
0.8
0.68 µH
0.6
0.4
0.2
0
0
5
10
15
20
25
30
35
Current (A)
40
45
50
55
60
2.0
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
Inductance (µH)
L vs Current
1.6
1.2 µH
1.2
0.8
0.4
0
0
4
8
12
16
20
24
28
32
Current (A)
36
40
44
48 52
2.4
2.0
1.6
1.5 µH
1.2
0.8
0.4
0
0
4
8
12
16
20
24
28
Current (A)
32
36
40
44 48
4
3
2.2 µH
2
1
0
0
4
8
12
16
20
24
Current (A)
28
32
36
40
44
5
4
3.2 µH
3
2
1
0
8
7
6
5
4
3
2
1
0
0 2
4
6
8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
Current (A)
4.7 µH
0
2
4
6
8
10 12 14 16 18 20 22 24 26 28 30
Current (A)
Document 812-2 Revised 06/30/15
Document 812-3
URE
T
A
R
E
P
M
E
T
HIGH
Shielded Power Inductors – XAL1060
L vs Frequency
0.394 ±0.020
10,0 ±0,50
Dash
number
-181
-401
-681
-122
-152
-222
-332
-472
10
XXX
4.7 µH
Inductance (µH)
3.3 µH
2.2 µH
0.445 ±0.020
11,3 ±0,50
1.5 µH
1.2 µH
0.68 µH
1
Dash number
Indicates orientation
of terminations
0.40 µH
0.236
max
6,0
0.18 µH
0.1
0.1
1
10
0.087±0.004
2,20 ±0,10
0.175 ±0.010
4,45 ±0,25
100
Frequency (MHz)
ESR vs Frequency
See
table
0.315
typ
8,0
0.262
6,65
50
45
40
35
30
0.354
9,0
0.40 µH
0.18 µH
4.7 µH
3.3 µH
2.2 µH
1.5 µH
1.2 µH
0.68 µH
Equivalent Series Resistance (Ohms)
Terminal
thickness typ
(in / mm)
0.0394 / 1.0
0.0315 / 0.80
0.0236 / 0.60
0.0157 / 0.40
0.0157 / 0.40
0.0118 / 0.30
0.0079 / 0.20
0.0079 / 0.20
0.094
2,38
25
Dimensions are in
inches
mm
Recommended
Land Pattern
20
15
10
5
0
0.1
1
10
100
Frequency (MHz)
Document 812-3 Revised 06/30/15