Datasheet

UNISONIC TECHNOLOGIES CO., LTD
U74LVC2G04
CMOS IC
DUAL INVERTER

DESCRIPTION
The U74LVC2G04 is a dual inverter gate and it provides the
Boolean function Y= A in positive logic.
This device has power-down protective circuit to prevent the device
from destruction when it is powered down.

FEATURES
* Operate From 1.65V To 5.5V
* Inputs Accept Voltages To 5.5V
* High Noise Immunity
* Low Power Dissipation
* Max tPD Of 3.2 ns At 5V

ORDERING INFORMATION
Ordering Number
U74LVC2G04G-AG6-R
U74LVC2G04G-AL6-R
U74LVC2G04G-AG6-R

Package
SOT-26
SOT-363
(1)Packing Type
(1) R: Tape Reel
(2)Package Type
(2) AG6: SOT-26, AL6: SOT-363
(3)Green Package
(3) G: Halogen Free and Lead Free
Packing
Tape Reel
Tape Reel
MARKING
6
5
4
204G
1
2
3
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-393.B
U74LVC2G04
CMOS IC

PIN CONFIGURATION

FUNCTION TABLE
INPUT(nA)
OUTPUT(nY)
H
L
L
H
Note: H: HIGH voltage level; L: LOW voltage level.
LOGIC DIAGRAM (positive logic)

1A
1Y
2A
2Y
1A
2A
Logic symbol
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
1
1
1Y
2Y
IEC logic symbol
2 of 5
QW-R502-393.B
U74LVC2G04

CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
VCC
VIN
RATINGS
UNIT
-0.5 ~ +6.5
V
-0.5 ~ +6.5
V
Active Mode
-0.5 ~ VCC +0.5
V
Output Voltage
VOUT
Power-Down Mode
-0.5 ~ +6.5
V
VCC or GND Current
ICC
±100
mA
Continuous Output Current (VOUT=0 to VCC)
IOUT
±50
mA
Input Clamp Current (VIN<0)
IIK
-50
mA
Output Clamp Current (VOUT>VCC or VOUT<0 )
IOK
±50
mA
Power Dissipation (TA=-40°C ~ +125°C)
PD
300
mW
Operating Junction Temperature
TJ
-40 ~ +125
°C
Storage Temperature
TSTG
-65 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Supply Voltage
Input Voltage

RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
VCC
VIN
Supply Voltage
Input Voltage
Output Voltage
Input Transition Rise or Fall
Rate

Active Mode
Power-Down Mode
VCC=1.65V to 2.7V
VCC=2.7V to 5.5V
VOUT
tR / tF
MIN
1.65
0
0
0
0
0
TYP
MAX
5.5
5.5
VCC
5.5
20
10
UNIT
V
V
V
V
ns/V
ns/V
ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
High-level Input Voltage
Low-level Input Voltage
High-Level Output Voltage
Low-Level Output Voltage
Input Leakage Current
Power OFF Leakage Current
Quiescent Supply Current
Additional Quiescent Supply
Current Per Input Pin
SYMBOL
VIH
VIL
VOH
VOL
II(LEAK)
IOFF
IQ
∆ICC
TEST CONDITIONS
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
VCC=4.5V ~ 5.5V
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
VCC=4.5V ~ 5.5V
VCC=1.65 ~ 5.5V, IOH=-100μA
VCC=1.65V, IOH=-4mA
VCC=2.3V, IOH=-8mA
VCC=2.7V, IOH=-12mA
VCC=3.0V, IOH=-24mA
VCC=4.5V, IOH=-32mA
VCC=1.65 ~ 5.5V, IOL=100μA
VCC=1.65V, IOL=4mA
VCC=2.3V, IOL=8mA
VCC=2.7V, IOL=12mA
VCC=3.0V, IOL=24mA
VCC=4.5V, IOL=32mA
VCC=5.5V, VIN=5.5V or GND
VCC=0V, VIN or VOUT=5.5V
VCC=5.5V, VIN=VCC or GND, IOUT=0
VCC=2.3 ~ 5.5V, One input at VCC-0.6V,
Other inputs at VCC or GND
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
TYP
MAX
±0.1
±0.1
0.1
0.1
0.45
0.3
0.4
0.55
0.55
±5
±10
10
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
μA
μA
μA
5
500
μA
0.65×VCC
1.7
2
0.7×VCC
0.35×VCC
0.7
0.8
0.3×VCC
VCC-0.1
1.2
1.9
2.2
2.3
3.8
3 of 5
QW-R502-393.B
U74LVC2G04

CMOS IC
SWITCHING CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
SYMBOL
Propagation delay from input
(A) to output(Y)
tPLH
tPHL
TEST CONDITIONS
VCC=1.8±0.15V, RL=1KΩ
CL=30pF
VCC=2.5±0.2V, RL=500Ω
VCC=2.7V, RL=500Ω
CL=50pF
VCC=3.3±0.3V, RL=500Ω
VCC=5±0.5V, RL=500Ω
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
1.0
1.0
1.0
0.5
1.0
TYP
3.5
2.2
2.7
2.7
1.9
MAX
8.0
4.4
5.2
4.1
3.2
UNIT
ns
ns
ns
ns
ns
4 of 5
QW-R502-393.B
U74LVC2G04

CMOS IC
TEST CIRCUIT AND WAVEFORMS
From Output
CL
VCC
1.8V±0.15V
2.5V±0.2V
2.7V
3.3V±0.3V
5V±0.5V
RL
Inputs
VIN
VCC
VCC
2.7V
2.7V
VCC
tR, tF
≤2ns
≤2ns
≤2.5ns
≤2.5ns
≤2.5ns
VM
CL
RL
VCC/2
VCC/2
1.5V
1.5V
VCC/2
30pF
30pF
50pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
500Ω
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO=50Ω.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 5
QW-R502-393.B