UNISONIC TECHNOLOGIES CO., LTD UT06P03 Power MOSFET P-CHANNEL ENHANCEMENT MODE TO-252 SOT-89 The UT06P03 is P-Channel Power MOSFET, designed with high density cell with fast switching speed, ultra low on-resistance, excellent thermal and electrical capabilities. 1 1 DESCRIPTION 6 SYMBOL 5 4 2 1 3 SOT-26 ORDERING INFORMATION Ordering Number Lead Free Halogen Free UT06P03G-AB3-R UT06P03G-AG6-R UT06P03L-TN3-R UT06P03G-TN3-R Note: Pin Assignment: G: Gate D: Drain S: Source Package SOT-89 SOT-26 TO-252 1 G D G Pin Assignment 2 3 4 5 D S D G S D D S - 6 D - Packing Tape Reel Tape Reel Tape Reel MARKING SOT-89 SOT-26 TO-252 6 5 4 6P03G 1 2 3 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 5 QW-R502-156.D UT06P03 Power MOSFET ABSOLUTE MAXIMUM RATINGS (TC = 25°C, unless otherwise specified) PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current Pulsed Drain Current (Note 1, 2) RATINGS UNIT -30 V ±20 V -4 A -20 A SOT-89 0.78 W Total Power Dissipation (TA = 25°C) SOT-26 PD 0.41 W TO-252 1 W Junction Temperature TJ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VDSS VGSS ID IDM THERMAL DATA PARAMETER Junction to Ambient Junction to Case SYMBOL SOT-89 SOT-26 TO-252 SOT-89 SOT-26 TO-252 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw θJA θJC MAX 160 300 110 18 110 7.93 UNIT °C/W °C/W °C/W °C/W °C/W °C/W 2 of 6 QW-R502-156.D UT06P03 Power MOSFET ELECTRICAL CHARACTERISTICS (TC =25°C, unless otherwise noted) PARAMETER OFF CHARACTERISTICS Drain-Source Breakdown Voltage Drain-Source Leakage Current Gate-Source Leakage Current ON CHARACTERISTICS Gate Threshold Voltage Drain-Source On-State Resistance (Note 2) SYMBOL TEST CONDITIONS BVDSS IDSS IGSS VGS =0 V, ID =-250µA VDS =-24V, VGS =0 V VDS =0 V, VGS = ±20V -30 VGS(TH) VDS =VGS, ID =-250 µA VGS =-4.5V, ID =-3A VGS =-10V, ID =-4A -0.9 RDS(ON) DYNAMIC PARAMETERS Input Capacitance CISS VDS =-15V, VGS =0V, f=1MHz Output Capacitance COSS Reverse Transfer Capacitance CRSS SWITCHING PARAMETERS Turn-ON Delay Time (Note 2) tD(ON) Turn-ON Rise Time tR VGS=-10V,VDS=-15V,RG=6Ω, ID=-1A Turn-OFF Delay Time tD(OFF) Turn-OFF Fall Time tF Total Gate Charge (Note 2) QG VDS=0.5BVDSS, VGS =-10V, Gate-Source Charge QGS ID =-4A Gate-Drain Charge QGD SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Drain-Source Diode Forward Voltage VSD IF = -1A, VGS = 0V Maximum Body-Diode Continuous Current IS Maximum Pulsed Drain-Source Diode ISM Forward Current (Note 1) Reverse Recovery Time tRR IF=-4 A, dIF/dt=100A/μs Recovery Charge QRR Notes: 1. Pulse width limited by TJ(MAX) 2. Pulse width ≤300us, duty cycle ≤2%. 3. Surface mounted on 1 in2 copper pad of FR4 board. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP -1.5 60 37 MAX UNIT 1 ±100 V µA nA -3 75 45 530 135 70 5.7 10 18 5 10 2.2 2 mΩ pF ns 14 nC -1.2 -2.1 -4 15.5 7.9 V V A ns nC 3 of 6 QW-R502-156.D UT06P03 Power MOSFET TYPICAL CHARACTERISTICS On-Resistance Variation with Drain Current and Gate Voltage On-Region Characteristics 25 VGS=-10V 20 -4.5V -5.0V -6.0V 2.4 VGS=-4V 2.2 -4.0V 2.0 -4.5V 1.8 15 -3.5V -6.0V 1.6 10 -7.0V 1.4 -3.0V 1.2 5 -8.0V -10V 1.0 0.8 0 1 2 3 4 Drain to Source Voltage,-VDS (V) 5 0 10 40 20 30 Drain Current,-ID (A) 50 Drain Current,-ID (A) Reverse Drain Current,-IS (A) On-Resistance,RDS(ON) (Ω) Normalized Drain-Source OnResistance,RDS(ON) 0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 6 QW-R502-156.D UT06P03 TYPICAL CHARACTERISTICS(Cont.) Power (W) Drain Current,-ID (A) Capacitance (pF) Gate-Source Voltage,-VGS (V) Power MOSFET Transient Thermal Response Curve 1 D=0.5 0.2 0.1 P(pk) 0.1 t1 0.05 0.01 t2 0.02 0.01 RθJA(t)=r(t)×RθJA RθJA=160℃/W TJ-TA=P×RθJA(t) Duty Cycle,D=t1/t2 Single Pulse 0.001 0.0001 0.001 0.01 0.1 1 Time,t1 (ms) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 10 100 1000 5 of 6 QW-R502-156.D UT06P03 Power MOSFET UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-156.D