TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Product Specifications Approval Sheet Product Description: SAW Filter 2602.5 MHz 105MHz BW Band41 SMD 1.1X0.9 mm TST Part No.: TA1967A Customer Part No.: Customer signature required Company: Division: Approved by : Date: Checked by: Anne Chen Approved by: Bob Chau Date: 01/27/2016 1. Customer signed back is required before TST can proceed with sample build and receive orders. 2. Orders received without customer signed back will be regarded as agreement on the specifications. 3. Any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-02 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 2602.5MHz 105MHz BW SMD1.1x0.9mm MODEL NO.:TA1967A REV. NO.:1 A. MAXIMUM RATING: 1. Input Power Level: 27dBm 2. Operating Temperature: -30°C to +85°C RoHS Compliant Lead free Lead-free soldering 2. Storage Temperature: -40°C to +85°C 3. ESD 50V(MM) Electrostatic Sensitive Device (ESD) 100V(HBM) B. ELECTRICAL CHARACTERISTICS: Terminating source impedance : Zs = 50 Ω ZL = 50 Ω Terminating load impedance : Item Unit Min. Typ. Max. Note Center Frequency Fc MHz - 2602.5 - - Insertion Loss (2550~2655 MHz) IL dB - 1.8 2.7 - dBp-p - 0.8 2.0 - - 1.6 2.0 - - - - - Amplitude ripple(2550~2655 MHz) VSWR (2550~2655 MHz) Attenuation (reference level from 0 dB) 880 ~ 915 MHz (GSM900 Tx) dB 32 37 1710 ~ 1785 MHz (DCS1800 Tx) dB 32 37 2401 ~ 2482 MHz (ISM Band) dB 20 28 ppm/℃ - -36 Temperature Coefficient of Frequency C. MEASUREMENT CIRCUIT: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 Source & Load Impedance: 50 D.OUTLINE DRAWING: top view bottom view ( C) □ Marking Descriptions Series Number (C) □ Pin Description Date Code(Year+Month) □ : Year/Month Code (Follow the table) YEAR/Month 1 2 3 4 2013 A B C D 2014 N P Q R 2015 a b c d 2016 n p q r 5 E S e s 6 F T f t B, C, E Ground A Input D Output 7 G U g u 8 H V h v 9 J W j w 10 K X k x 11 L Y l y 12 M Z m z E. PCB Footprint： TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 F. Frequency Characteristics : Frequency Response TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Reflection Functions : VSWR Smith Chart TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=3000 ) 2.TAPE DIMENSION (C) □ (C) □ Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 H. RECOMMENDED REFLOW PROFILE : 1. 2. 3. 4. Preheating shall be fixed at 150~180℃ for 60~90 seconds. Ascending time to preheating temperature 150℃ shall be 30 seconds min. Heating shall be fixed at 220℃ for 50~80 seconds and at 245~260℃ peak (min. 10sec). Time : 2 times. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7